diff --git a/config/default/Configuration.h b/config/default/Configuration.h index ec8b162cd6..9f92bc4782 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index e6bfde5c3b..ccc540621f 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 71ec3d2636..e74abb4bc1 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 78c6bba3aa..c334cefe5c 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index fcfac4bbae..027c50606a 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 56bca09178..2e44f2143c 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index cddee330f5..1e947b2c11 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 185b48f09f..1855288461 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index f08c789c20..9851cd2d9e 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 82cb3b97a7..b151ff3533 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index a7cdb47cf2..9ce3b4526c 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -384,11 +384,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 8924bdbbe7..bc012563b1 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 0a2831a24d..f09d94d3c4 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -384,11 +384,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index b59fc313f8..b05791253a 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index da510b0b2a..f0b384a4b3 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 2cfc536804..8c758f4586 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index a27434bd6c..901ab0aec1 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 036978af11..98c5af864c 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index a23716a245..fbfda83fe1 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 632eb43e4f..7a1e433cb5 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index a23716a245..fbfda83fe1 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 3b71b6323c..9994847cea 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index acc3199be8..d62c681594 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index ac944eb362..8f6f3e070c 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 5d27a6e10f..13a36b624f 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 4714f8f689..c9328db56f 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 429bfba76c..03d562c506 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 34fc19908a..2ce89cf06d 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index f96fda0ac4..a033ce5499 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 04c20bec22..e1b716520d 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 99dc097fae..c15e6906cc 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index d53644a811..34566c119f 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index faf49d4ab3..1ccb0e508b 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index a72f8d03cb..c74bf96d85 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -350,11 +350,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 3aa99f26ee..b237b8eba0 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AnyCubic/Mega Zero/Configuration.h b/config/examples/AnyCubic/Mega Zero/Configuration.h index 9aed9bf999..3dbabdad76 100644 --- a/config/examples/AnyCubic/Mega Zero/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h index e8786111e7..5894a30806 100644 --- a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 596616310c..b1903d6100 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -351,11 +351,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index ff1df65942..03e0f43d98 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index f5b381fc05..0f70a32d55 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 9351ceb888..751f5aa34f 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 59cbea9b47..1e9ab74728 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 341c9476cd..794d468661 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 567d286c84..26dba848b2 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 07b0285a2d..00a4d82a49 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index 224deae1e9..1c5af4a449 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 07b0285a2d..00a4d82a49 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index b33ae0b6d0..67ab975775 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index b58b2a1039..b21076f866 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 70cb7ed230..0a984b4ce2 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 89f5d5ed14..05268fbdd9 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 02d6032c6b..ea3c4ed1d9 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index c265ed793b..11c460ac51 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 764e274a61..9a7c93b507 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index e03a34e965..ab4f1818e2 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 56f962627c..0038c352ff 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 863246fe99..15925b17dc 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index bf830815ea..ab33dc8ebe 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 02dfe07610..4204c765ec 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 2959837de4..8a6f09a8bf 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index be9aff2132..1fa10d37ed 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -354,11 +354,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 6b6e22c8c9..271e9b56d3 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 38c3ebe525..1d081cb51a 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 2959837de4..8a6f09a8bf 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 5d1374bf2b..3a8735ab3c 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index c9ef7ea391..f4d6a9cfc4 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 51ae757a08..fb7e1b4032 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 927ada6acb..1ceb63f800 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 1d979558e5..ea0e2d4a8b 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 63ee567373..9da25d4aef 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index ec185917c4..23827bdcc1 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -355,11 +355,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 4cad3767af..5cd41e3776 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 4de0846802..76e2ea73a3 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index d74d5b3a4f..c8aa1f7769 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 9a09a4e825..bbc3765361 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 4a1154b023..5f02040ab9 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 9e93a5575f..1cc39c2089 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 4a1154b023..5f02040ab9 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index c79554793b..aa1ddcd74d 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -353,11 +353,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 2d10d977c4..f58f4db17a 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 40c3b10f09..5ed0768076 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 69cc1df0ff..ec5e7369d4 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index fee2b60924..5fe77795b1 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 8715616ff8..91f9e0be12 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index e67525273c..e693078abe 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a4f9626487..be34c1fb9c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index af0a4be577..19e7fb1f20 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 183e13ecd5..bb46a7083c 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index cf4b3cac34..c27e30d7f8 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 2839a54350..55bcdc8f98 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 4dca79daf6..2cc6370dab 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 8974c2188a..0ea94000d7 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 7c2c070594..dea6fb86c1 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 7a15514e81..23be4a7a25 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index cba2af7381..5b8bcdd069 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 7201b0c8a8..9a8b11a11a 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h index a3249aef2c..ad4adcf0e6 100644 --- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h index d183c9d993..ac0879dd27 100644 --- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index c9d96d5d71..85fa9449a8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 9f1eb984e2..1910b046ee 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index db681ee836..0fe733d6e1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 270ea4da84..9c16b2fe4e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 69dec46246..bb5a48ae37 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 343468a9e8..9591a57d3d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 6d93fa7e8e..8b3a005dbe 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 849a146b0e..0ca947bdf8 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 546de3ee4d..e5ceca5677 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 6e09211ac8..94e9419ead 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index f607c313f4..927b32bd16 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 0b53d8470e..9e4f198c7f 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 53a0b8637a..742b84228d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 69def9634b..9d1c96f3f9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index b3702f2ddb..ecb7803bbf 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 3528b57d0b..65eda40816 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 9525864ca4..42ee6b07b2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 69def9634b..9d1c96f3f9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 53683f9919..6c0cbd5634 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 5edcb89626..0934165ec0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index f6f86d7d80..842e78a594 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index b10d35cc1b..7cb3a23bbd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 4ef679c55d..df7864113d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d0c3a547ff..e2f428dd35 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 2ef556bfec..5afb2af6ae 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3ce60985d5..e04f62ea68 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 06fe3fe22d..9727b923bd 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 595fbaa4d5..0f08264e26 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index d901f89cfa..d533274ff8 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 1944745714..09c4c2ea96 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 8ab5e2742b..744c878958 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index d7b5b6c44c..602cc0005b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index b195c3175f..635aad08ad 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index d7b5b6c44c..602cc0005b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 2057c6ab33..10fa5a7218 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index d7b5b6c44c..602cc0005b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index d2b2c66a18..2a143788f4 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index d7b5b6c44c..602cc0005b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index fc4063768b..6973f99286 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index dc728df673..cad65547a3 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h index d394b630b6..a1e949a5bc 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 78d1e786fe..c6acd03718 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 8f5d220565..e6679c51a1 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index f42807dbce..ba4c0a7549 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5 Pro/Creality/Configuration.h b/config/examples/Creality/Ender-5 Pro/Creality/Configuration.h index a68677f77c..5aad2cd9b2 100644 --- a/config/examples/Creality/Ender-5 Pro/Creality/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/Creality/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h index 9bb60e6b15..9dc3aa0909 100644 --- a/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Creality/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index f34bdeb3d2..a4f99ccded 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 9bb60e6b15..9dc3aa0909 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index cbdb91f8f8..6bf30059c8 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -356,11 +356,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 158ebf7ecc..7ee7d777c6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index ccf1ee2474..fdd99003b5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6e004a3b3d..76036b6e85 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5/Creality/Configuration.h b/config/examples/Creality/Ender-5/Creality/Configuration.h index bf200c0b23..21e118f3c2 100644 --- a/config/examples/Creality/Ender-5/Creality/Configuration.h +++ b/config/examples/Creality/Ender-5/Creality/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h index 392770a4fc..411235feb5 100644 --- a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 8c18713f2a..30bada9b44 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 392770a4fc..411235feb5 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Creality/Ender-5_Plus/Configuration.h b/config/examples/Creality/Ender-5_Plus/Configuration.h index 865d04e450..8f7a8ec7b3 100644 --- a/config/examples/Creality/Ender-5_Plus/Configuration.h +++ b/config/examples/Creality/Ender-5_Plus/Configuration.h @@ -348,11 +348,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h index 912fed862a..d8a8c56f96 100644 --- a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index c2dac40419..0f084df5fd 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 388009c0a9..5485c49175 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index fbae828f29..f9fb42ffec 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -348,11 +348,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index df76960df5..a3b45a9400 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index e16fa1fede..ea9319a590 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index e4c29afc95..7dfec3b75a 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 4f93a6474f..06457caa71 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index decf23d2f2..5a00b85a5e 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 026cbeb4f1..d2e7c4f9d5 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 71f2fc0cf5..30c3f4bd8e 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index b9ba694415..a995440256 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -348,11 +348,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index c0c77aa6ac..c2a850f002 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index a89a1f8605..b1c55f0d4e 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index a869607b87..d80d67d68e 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index b89fec3cdc..2292d56ac5 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index ee6bd4c6be..5bd22c0c3f 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index d0cf54bf78..4b79dec9d4 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index ee6bd4c6be..5bd22c0c3f 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 383bad0199..1270447b8b 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 170a6d09ea..538b3d3acf 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index ae5cd87592..eeb1372fc2 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 01171471d8..13cc240f37 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 77b9d760f6..d37851c26a 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 83a5f9ac29..09e1c04b95 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 964ea0b446..e212bc8ef5 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ee1fec45f3..be326ef2b3 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 86b3bf3f61..8026cf09bc 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -389,11 +389,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index e90be2fe10..ef3f8ec529 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 214f5fcfb0..c09fc88a7b 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index fca12cf814..d4ba4dff67 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index ab34a2c422..c6c478db45 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -349,11 +349,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index c9012461ec..d4386a6e46 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 50a4f66538..23155a1eb2 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 628ca9b60d..6775641be2 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 50efac18fb..ac9ffee137 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index f99aa22179..0bf1f2de35 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index 2f5e46b1b8..5cd01ad3e4 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 4ac88c88a5..02681aad78 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h index 36384e1270..809d217fda 100644 --- a/config/examples/Geeetech/A10T/Configuration.h +++ b/config/examples/Geeetech/A10T/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 4ac88c88a5..02681aad78 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 8e953a22a3..729bdbccdd 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 6929ab0d0c..3b7a77ee44 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index bdafa777f4..24c57df892 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 6929ab0d0c..3b7a77ee44 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 39b056da7d..9aadb9a039 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 6929ab0d0c..3b7a77ee44 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index f2efb71708..6c5ac0df72 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 8b7f6f6c7a..b88e7d7ed6 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index eed3e57394..32d8a58413 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 7ecd2c26af..076aab7082 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index a74856c07e..b4c159edfc 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index a869607b87..d80d67d68e 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index f8f46d93b9..33075f6cc6 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 8b7f6f6c7a..b88e7d7ed6 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index b915881d07..f6fb10a4f7 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 1b6ac42c6c..b3c0520c8e 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 6e7519add9..2271e27937 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 7ecd2c26af..076aab7082 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 7b116b311e..d594249df1 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 47472c3fcd..07d2f25d1b 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 11d118d626..45b5c59f9d 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index a869607b87..d80d67d68e 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 69174465f8..96fb473d4c 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index a869607b87..d80d67d68e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index a134a6677a..06250977db 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 0b78f8a7cc..b439d64dc9 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index da3567ddfa..8ca652047c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 93f4dc0a02..ccc51d7278 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 397ab8b3ef..ce45bb2f5e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 628ca9b60d..6775641be2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 0bcbc416bd..c5e6294474 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 628ca9b60d..6775641be2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 9f32599477..72c8ea4204 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 50d67223fc..1be6a42336 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 4dad80ccd3..3817d2512c 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 63293cde43..634fe5237a 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration.h b/config/examples/Intamsys/FunmatHT_4988/Configuration.h index 827be50984..88a2b73a67 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h index 04764fdd6b..5e0db29012 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 1504342dfb..5a0631fbd1 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 4c026a3a5b..2d8e70a1e5 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index c1d2687e62..6077e1b1eb 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 915045e193..4c3a7487db 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -351,11 +351,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 0cfbefe64d..b6d58c1096 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index d06b432bcb..1a3df9bd66 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 4c026a3a5b..2d8e70a1e5 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 9abe35bd74..e699ff29e3 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index ec4161fe85..ef3c7a7d47 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 1b6e1cadb6..fe28f146d7 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 4be8e329fe..279bf5a107 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 798cba74ab..79e0e748ec 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 93e9c99159..9fa9b0a4aa 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration.h b/config/examples/MakerFarm/Pegasus_12/Configuration.h index 002850cdb3..669335364c 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index 3354c2a3de..9656e13067 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 4bb632de55..8647fec935 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 92d1edb732..08ce770dd8 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index c5ba06d5f5..ccbb6221fb 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -351,11 +351,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a9b86cf13e..efeb25114b 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 698bae0af1..aa04741845 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index ee5f46ac0f..9a2ab766c3 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index f9c5c59946..27f33ec37b 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 39103e93c3..69c8a98f75 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index e152aa9b92..8c575b2e5e 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 505f065891..439ace7213 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index e6bfde5c3b..ccc540621f 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 8e4ce75e4c..20f4ba8470 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -353,11 +353,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index bc16d52eac..98cfd191ed 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -352,11 +352,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index db2faaa7d9..9e9f19ad12 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 521dcc81ee..a75ebb911a 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 5b4dfb1e2c..471a44a2f0 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 70ecf4ad16..107b9475bc 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index abed1c98a9..51436fd846 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 944b820a98..a2d107ece5 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index dfe766d392..7b436e3603 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 3df59e87af..55eb9740ce 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 6fbf9372d1..e4c8c38c26 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 5c60413fcc..01f89d4ef7 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 6a2c62efea..045056a956 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index b73318c42d..a0a27aa72a 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 7604cecf3b..dc5591a99c 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 7d9026a0c4..3709ca273d 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 3dfc974037..7b8ac0d189 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -349,11 +349,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 1f7df00bd8..351444e4ca 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index d948c6c887..9470ed5268 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -349,11 +349,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 1f7df00bd8..351444e4ca 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index cb5bcf1821..c022d3f32a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -349,11 +349,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 1f7df00bd8..351444e4ca 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 3f887b2a6f..4b9762ef10 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index e9f7c88ace..6433fff630 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 663fafa442..0c5d525d75 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -349,11 +349,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 52c8081a53..d1bcb62f9b 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 83f57b3aef..c3027b8bde 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 0df2b080a3..7f3b6e222a 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -386,11 +386,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 5e04fe1486..98b04e8731 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 58ad678121..333c7be0a7 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -386,11 +386,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index fc0368f9ae..6e4a9f74cb 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index ac7f84b2e9..7cb69c834b 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index dd007b074c..ec436a4efe 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 12544e49dc..6d40286b4f 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 768619df3f..a53210ec19 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 972a002b7a..a0aa3a7b40 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 6747e33f1d..53dedcb8ca 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Sovol/SV-01/Configuration.h b/config/examples/Sovol/SV-01/Configuration.h index 66b2896ffc..497f3b4047 100644 --- a/config/examples/Sovol/SV-01/Configuration.h +++ b/config/examples/Sovol/SV-01/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 7081944d67..8ea14aa638 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index ece60cebf8..bf8c0747c1 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 776dc49769..b5b302e69e 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index d2c2e124b9..279202cf32 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 78bc4498ae..d859a5b95d 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 0ac846bd39..9d012d2ed0 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 3bad2730b3..1a7dca15d7 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index d6988af712..5cda1ddde0 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index ca6135d638..b17dc51e91 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 4d80860a78..5990572add 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index ca6135d638..b17dc51e91 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 531031a938..9b280c8006 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 12c858d34e..7f2e4c926f 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index d0fec499d3..2d5504d437 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -368,11 +368,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 873b064ce6..4b3e234a9a 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index a0ab77df45..e181a58e49 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 2db1173bf5..df919956f9 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 4c3d061ccd..a9148fb124 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 2c8dffb04a..307f6f3da7 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -348,11 +348,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 9c0ae9b1e3..b9bc6aa5fe 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index df32bf8c6c..0059b6475c 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 040cb6d47b..236184bde8 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 6a0a6d1f49..9272d928cf 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index b0b82b15fc..96e5cd4be3 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 960f8adb15..ca19500a88 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 2898a4770b..7f629300d7 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index b9e272749d..72838d8a61 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 110dc44e19..dcc8a6f7ae 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 40fd26adbf..908240d69d 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 6faf44fef1..9f304ab9c9 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 4abb9072fe..7fd956f3d3 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -366,11 +366,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 8ac8d4ba36..c979114d0f 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -41,11 +41,10 @@ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index e2edc75263..95017e024a 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 27b331acc5..96be38b60f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 0b9eede07e..40ff899dcd 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 27b331acc5..96be38b60f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index ca268cda7a..5746fd4dcd 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -359,11 +359,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 70d926b1b4..8c39255fb1 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index f5fc8fcc5b..57d4e1aab8 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 0f81401704..886862c34d 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 70fbd8c5fa..9149bf2656 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 2510a0f945..7c67dc8260 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index d27a3af184..56c022652f 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 4318867941..c089fa3eb7 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 0f4ef3f882..a179f3c6ac 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 751740733f..bad2108340 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index f383115b5b..9d36eb32f3 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 5090d90a62..5911afe5ec 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index e54540b116..0f25477984 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 078a0d1746..14b73fa608 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 5d19db3f4e..713d82780d 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -348,11 +348,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 5d907735ee..a3cd3df806 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -33,11 +33,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 06f516a2fa..88b96840de 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 4177e013b3..60edd82945 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -362,11 +362,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index de21bc3637..f7ca0afbce 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 7fffeb0041..768d807f24 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -361,11 +361,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 2560c89454..e5bcf7bb07 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index d946d46d89..466294fe19 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -347,11 +347,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 1f05403680..bd57226060 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 1e78cf7e4d..1ba9fe72b3 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 39b797471d..61853a579d 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 1bb2c9fb8c..a646af7497 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 50508adf86..de9a24df16 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 1c9a8815e1..3bf5754810 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index c5d26c9166..f4dd70366e 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 702c9abe8d..7a2604934b 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 13dbd0828d..00ce7332dc 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index e5e9a3ee3f..7f15b4937a 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 05524a030e..85ba187e4a 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 6348f71bf2..305051f42a 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 05524a030e..85ba187e4a 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 29e76a2d6c..7beb7421f5 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 5c858c7a7a..20b3c32fe0 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index d205de0d3a..8228f6d2a9 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 1ca9e74bca..383e28e9e2 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 42fabd3b68..252d6ab799 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index f743a4a8e2..a80096353d 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 18e8f2a79d..735e18b461 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index f743a4a8e2..a80096353d 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 05af3a8d36..fc5d8e9150 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index f743a4a8e2..a80096353d 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index a10d95196c..40423cf7b9 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 7f5085986f..0d90258159 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index c9c4ef493f..076aee56af 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -351,11 +351,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 9ddc432e5f..935962659d 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 297c0cc5d0..8a10d1146b 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 7e163a64da..41ad2c252a 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index ffe31c7520..911bf1e96a 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index bbff35d9bd..5a2c4df0c3 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index e8e92c44d3..5dae48f0bf 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 2d4390fce5..d2987871cb 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 515bb0d7ec..52215a6794 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 5c858c7a7a..20b3c32fe0 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 5e1f43eb54..f72e12e533 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 9b70e4c835..01744a64e4 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 8831227583..bf30a43f7b 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 3287367526..fe915fd30f 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -350,11 +350,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index a4c981db96..912f2c2eb2 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index b2528bd9c0..9c58d3adca 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index f44239df15..874e02a8c4 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -350,11 +350,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 67d35c1d96..eb5bc80077 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 6c77e53786..0693986f98 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 5ef135d9f5..d15c9a9628 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index ea12b1e93a..a8d849659b 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -346,11 +346,10 @@ #endif #endif -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 567f1703b1..0313b3ee4c 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -32,11 +32,10 @@ */ #define CONFIGURATION_ADV_H_VERSION 020007 -// @section temperature - //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== +// @section temperature /** * Thermocouple sensors are quite sensitive to noise. Any noise induced in