diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 677c2c4303..cabbbce600 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 092b7e2358..6dc3e76295 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index ab68923900..f8c0019a91 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index de9eeac5e9..114211063b 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index cffdd9f2a4..7f67b867bf 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 63a9f6a42d..8c68922565 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 779fc4dbb6..b98f88c3eb 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 65d5aa5b49..1ada76e145 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 0b242be199..8f25d72e68 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index fd59c363ca..bf713497e8 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index d9a62613c9..c5e8ae39e9 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index be0cce2738..1a6bf104cf 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 244338cdaa..895457a60a 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 5f00d3af8e..9ad606a988 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index a04f770c89..06064c9959 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 30994ce86c..44a6a23db9 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1899,7 +1899,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 9db561d3fe..0701a9e4da 100755 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index d42b2e60a5..f04b865dd6 100755 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 0553b46f78..4a2277f4fb 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 38d16a119e..8fe849aa96 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 13a39b4647..a268e9697c 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 9c04693b6a..cc88639809 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1902,7 +1902,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 8045f44083..00b3b21bc8 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index c97d4cd44e..8999f4ffc3 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 5705ac278a..5ba4c0096e 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 491bfabe95..a7d0d8a53c 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index d59751d472..ef5e646f79 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 0817974aa9..f718535b59 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 45ea6d17a9..4868039ba4 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index e572923db6..67ffb2139b 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h index b7ba135359..01c49da909 100644 --- a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 7b5d321b85..0627f30462 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 531964ba3e..b4731e27a6 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index f168c121a3..b112c01bb1 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 2a538fe050..8e46da1f1f 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 127605752b..94947c31c9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index e8991e9545..a329669319 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index dc884f831a..78c75b6fec 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index be4e095cca..12d91ee654 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index e30ae6fe29..7057abe6dd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index f630e11f72..6bf6e7d74b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5189814bda..39ba61af32 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 75100f7670..297d653920 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index 0bf5b629c6..0b22bd29df 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index 038015f439..3459387c2b 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index c47c4db66d..2a65a4c9b9 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index fe1fc26169..af93adf897 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index c201e9957d..63e3f5b198 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index d2f3ccf90d..0523175d35 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 2584416f76..c6f4ce39c2 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index f8e33fb09f..ec8c138e93 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index ff021d2929..250902b602 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 9fdc86cb91..4039c49d97 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index ba089ffe28..6f585fb749 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1900,7 +1900,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 5b25f7b0a7..04936ecb91 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index a1114a28dc..2b4fae2b1a 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 414c164eba..45543e61e2 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 784bec318c..51abef006e 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1900,7 +1900,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index c589d8fae5..92e00cbc4f 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 55fe83ba4c..065080f4be 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index ed0033b4f9..37065791bb 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 3034adb7bf..b9c328da7f 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 9b809b95f3..c2f017555a 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 9903e99599..d5c191d9a6 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 4be3fd5b94..027db7339b 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 729497f8cf..b367443200 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 496ac61a7b..7efb52a74f 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 8c4f99a3fc..50346509f0 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 2c2f5828d5..ac54b07c51 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 37194e0c26..8ed9c8d6f3 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index cf637873d4..e54e768974 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1894,7 +1894,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 0a27d1c991..de364fa7cf 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 63c415c17c..aad6717194 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 624ab653d6..40dbd76617 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index f73856a995..a5c513746b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 710f43066b..197f5bcc48 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index c445fc1460..eac9f0ed33 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1886,7 +1886,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 51a3fb71de..465b7b49fc 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h index 1ed8b3fec3..c437eb95ac 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index c9b47730a2..a7906f3982 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1899,7 +1899,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index e3c5beb8d8..2d4b786c16 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 3b188b5857..e40bc94610 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1899,7 +1899,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 345c51b63d..4c365a6178 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index df9499c787..cc1c04e596 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -1888,7 +1888,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index c986afcd48..bb99b8353b 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index d1a3adf888..7d29e09089 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index e25c2cb4aa..9d7901c348 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index f48ab93ba1..0870f8bb36 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 9db7a8d3ce..d3d084099e 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index e9c8e993ee..f2a6d0c6f1 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index bc94fbf8d2..f011db127f 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index e4f419046a..bc10d20d3b 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 547c4296fe..28e0497493 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 9e15fec447..25b47ae4d3 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 8dbc664f94..2ce3f7fc08 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 94fd2a909e..db569d13a9 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 54d79229ab..f3d9112e60 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1892,7 +1892,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index ffd2319290..a7176c31b1 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1892,7 +1892,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 72936f0e1d..8094b282d5 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index ad912c04de..179bc639d0 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index ffdd8f5226..a299eeec6d 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index c3669f4e94..28e5a723f5 100755 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index de243c82e2..0281a4c6d6 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 9d68204590..5f9fd59c80 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index efc862900d..65ab1c57b4 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index ff20655000..0607abd357 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index e4d3f64860..3e649910cf 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 1bf9526077..01c2400e51 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 622a2cf690..ae53cffb29 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 5453a82c1a..04afb205ec 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 94e923c582..1ca9a5e3bd 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index a41d1f7cc9..170d2fd4b7 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index d90a7ab538..9a5ba49e23 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1908,7 +1908,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index d151af7a3a..e65630b787 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index dc7d1ce340..5b567afc69 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 9e718482d4..963e20418f 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index ea15943f49..c07a1ef89f 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 12b099fee0..cfe92009e2 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index f13faa51ae..37b630ff15 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index a1b4d8681a..7f5b39e939 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 8e9fcdef2e..b891cb30a2 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1898,7 +1898,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 7f12ba538c..eb45cf9315 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 61d013d208..cba0ab9264 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1896,7 +1896,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index fdb95a2aad..ffecf1e43e 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8eb8b1b0f0..ada7193bc7 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 453f874c77..b01a30ea6d 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 47267b7ad1..196b8c932f 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 89b5d8b21d..3230b4a1be 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 8e88fd77ff..79c9b64534 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 8c6f657d61..6b7aab0f59 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 6e98996002..69dd90ac97 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index a3d5070696..e4c7b1b706 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 20da4fdad4..637e47e502 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 0d7b66e623..08cb36da98 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 5c6e8a900a..6c1df423a2 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index c766dbb9de..bea035fd01 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 638d1360f5..bd7644144e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 6ff751071a..98b485d93a 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 1b130123b8..e899de326e 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 4f7260ccc1..d371bc14ed 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 0a6a832082..5b0e97a23c 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1897,7 +1897,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index f87dffa3c8..05d72ef9f2 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 5db02c7971..a9530bb787 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 0bb08d2dda..2a6df03bc3 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1895,7 +1895,7 @@ */ #if EXTRUDERS > 1 // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN)