diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 783b67490e..b95aa530e8 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 4d0fbc7b85..941a484d26 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index d7a85af201..cf5c35119d 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2775,7 +2776,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2805,7 +2806,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2849,8 +2849,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2883,7 +2884,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2955,7 +2956,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2973,7 +2974,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3018,15 +3019,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3241,6 +3242,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3305,12 +3307,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 698eb19bdb..36a9042413 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 12 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ #define CHDK_PIN 12 // Optional second move with delay to trigger the camera shutter @@ -4049,7 +4049,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4320,7 +4320,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 4d69ee36d7..f648d2c276 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index e8477600dd..3a0af6ad11 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index d74236a312..41d4013545 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 420d9dde3a..65250787c6 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 347f1a314c..6cd1ad56cf 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1070,8 +1071,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1105,7 +1106,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1535,7 +1536,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1551,7 +1552,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2828,7 +2829,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2858,7 +2859,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2902,8 +2902,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2936,7 +2937,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3008,7 +3009,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3026,7 +3027,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3071,15 +3072,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3294,6 +3295,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3358,12 +3360,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 4f176e90c3..88cae9ce2c 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3452,7 +3452,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4063,7 +4063,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4334,7 +4334,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 55494fe147..d4423bd875 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1071,8 +1072,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1106,7 +1107,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1536,7 +1537,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1552,7 +1553,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2829,7 +2830,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2859,7 +2860,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2903,8 +2903,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2937,7 +2938,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3009,7 +3010,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3027,7 +3028,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3072,15 +3073,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3295,6 +3296,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3359,12 +3361,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 041b09825e..9bfac783f8 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 9db3b92131..e1383afe44 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 4948266357..916aa546bb 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 0c9c811f2c..513c51a8d6 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index ab1846c6aa..d4c4732b1a 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 63cb399a77..e265c22730 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 90151a2d8e..6d5f530735 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 63cb399a77..e265c22730 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index fce3f7ffdb..fac737e1b0 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1483,7 +1484,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1499,7 +1500,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1675,8 +1676,9 @@ #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #endif -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done + #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset @@ -2838,7 +2840,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2868,7 +2870,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2912,8 +2913,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2946,7 +2948,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3023,7 +3025,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3041,7 +3043,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3086,15 +3088,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3309,6 +3311,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3373,12 +3376,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index ce76a78816..174666782c 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 8563ac9073..b65cbafc52 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 73fdb38bc6..0af9ea5b72 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 961ad4bb6c..3fa0848c26 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2c743d55cb..4854b8c899 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 7120c0ae8e..56b0de531f 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index fe2e42621d..d7f389bbc3 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 78749157b7..65891d5735 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 74aa3eb736..d69b0c24fb 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 4fbc638946..657c387ddc 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 097c867efc..7f3717ad4f 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 2a52224883..089d2c92a4 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index f9371ac5ed..c82cb334fe 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 15f3f6bf7a..519f5f8400 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index f6fecce77f..60e7060a2c 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 6457ebc6f9..b9011d0197 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index f6fecce77f..60e7060a2c 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 1d5b1f2593..9170169654 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 880f7c9287..4c54df9f11 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 73853bd78f..2f77648bb5 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 880f7c9287..4c54df9f11 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index daaf2d2cdf..52c2244ad0 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1663,7 +1664,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3222,6 +3223,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3286,12 +3288,14 @@ #define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 74ffc3e0b5..32c4a87c3f 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4050,7 +4050,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4321,7 +4321,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 4dc0f687c3..e536cdf7ee 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1663,7 +1664,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3222,6 +3223,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3286,12 +3288,14 @@ #define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 74ffc3e0b5..32c4a87c3f 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4050,7 +4050,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4321,7 +4321,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index caf2275516..9d92c5c6f0 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1663,7 +1664,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3222,6 +3223,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3286,12 +3288,14 @@ #define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 74ffc3e0b5..32c4a87c3f 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4050,7 +4050,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4321,7 +4321,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 01beac0d4c..5a6a5615f1 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 2c26902dc9..b3b1166cc5 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index bd29255f97..0820f91bf6 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 093be90d08..63c3ffb7aa 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 7dc59814f3..f07f555ffb 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index ab00e7fcd6..2be1f8213d 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 0e5cdf4778..320c6d6f65 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 75300bc0a3..9419bf6fdb 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index 7a35fd58a1..8c631dc41a 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index f5110d8deb..8cc0245535 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index b3849708d2..6600b5896e 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1040,8 +1041,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1075,7 +1076,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1515,7 +1516,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1531,7 +1532,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2809,7 +2810,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2839,7 +2840,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2883,8 +2883,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2917,7 +2918,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2989,7 +2990,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3007,7 +3008,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3052,15 +3053,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3279,6 +3280,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3343,12 +3345,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 5850f69a69..4e3e834ff0 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 72a60c2662..b1ed91ac85 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1011,8 +1012,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1046,7 +1047,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2769,7 +2770,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2799,7 +2800,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2843,8 +2843,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2877,7 +2878,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2949,7 +2950,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2967,7 +2968,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3012,15 +3013,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3235,6 +3236,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3299,12 +3301,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 85af24ccca..25977a0911 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 29a566aa7b..ce42b7c7e0 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 1e5bc3c72d..0fe43e346f 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 4c1307bff3..3faeb977c3 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 3fa6695829..90d85e5441 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3447,7 +3447,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4058,7 +4058,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4329,7 +4329,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index e18153e0c8..494f431a79 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 92e6d9c37a..45a9e76736 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index de8a61f2df..a4b9f58f60 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 4a777e686f..6c1a1f2a0f 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 572a5e185c..7804be0ac5 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index ada27ddeaa..7b718a3843 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index b7001d6886..078419ce26 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 111ae9d822..efcdac5903 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index c3baefa980..560a1258d1 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1016,8 +1017,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1051,7 +1052,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1482,7 +1483,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1498,7 +1499,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2765,7 +2766,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2795,7 +2796,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2839,8 +2839,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2873,7 +2874,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2945,7 +2946,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2963,7 +2964,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3008,15 +3009,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3231,6 +3232,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3295,12 +3297,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 03033d4e31..1f57509f7f 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 2336eb196a..acc1f78adb 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index ada27ddeaa..7b718a3843 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 0c14ef94cb..1129c92d35 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index e914bc26da..d37e9ac514 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index f8f8ca8651..7922fdd5dc 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 7db92159e8..3265dd1c73 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 111887dd1b..240f58259d 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 8bc3458cf6..03de9e0fbd 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2747,7 +2748,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2777,7 +2778,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2821,8 +2821,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2855,7 +2856,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2927,7 +2928,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2945,7 +2946,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2990,15 +2991,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3213,6 +3214,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3277,12 +3279,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 9e5084b41f..66b3838901 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3439,7 +3439,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4050,7 +4050,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4321,7 +4321,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 2854137350..216e9c6175 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // #define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 06e4649681..7b1dfe2f60 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index df93fa70b8..935aa468d5 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // #define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index f09d864d57..ef1e8b6c4a 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 37aceee971..6a4ecdeafc 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2775,7 +2776,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2805,7 +2806,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2849,8 +2849,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2883,7 +2884,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2955,7 +2956,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2973,7 +2974,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3018,15 +3019,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3241,6 +3242,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3305,12 +3307,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index ee5f256a27..b50522355b 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index cd6f83a740..be7fd16db9 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1670,7 +1671,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2768,7 +2769,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2798,7 +2799,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2842,8 +2842,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2876,7 +2877,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2948,7 +2949,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2966,7 +2967,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3011,15 +3012,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3234,6 +3235,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3298,12 +3300,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // #define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 12b2635047..a60931c463 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 8f5a0eb393..0731a5d27a 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // #define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 750a692b87..ce703e7a7b 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index fef6bce2eb..9886aa3abd 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index c3ddf3a818..1785b6c7b0 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 3d87823833..e491dac3c8 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 3a9ec16b90..8993ea8ab3 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index c7a14b69ad..d401d76bcd 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -47,7 +47,7 @@ * BQ Hephestos 2 Configuration * * This configuration supports the standard Hephestos 2 with or without the - * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2 + * heated bed kit featured at https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ * * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality * related to the heated bed. @@ -56,12 +56,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1015,8 +1016,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1050,7 +1051,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2763,7 +2764,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2793,7 +2794,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2837,8 +2837,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2871,7 +2872,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2943,7 +2944,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2961,7 +2962,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3006,15 +3007,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3229,6 +3230,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3293,12 +3295,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 71f7730b4e..f595be71ee 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3450,7 +3450,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4061,7 +4061,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4332,7 +4332,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index b49845dc38..452c1e603a 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 3a9ec16b90..8993ea8ab3 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 097d145052..e2dc068c8d 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 7ba844d833..fb3736ddae 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 34842030e8..badf1f384a 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 48e2a2dc46..4d7005b1b1 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 626595d1d8..0b341ff299 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 8e3ae528c1..5c616853e1 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1017,8 +1018,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1052,7 +1053,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1482,7 +1483,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1498,7 +1499,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2765,7 +2766,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2795,7 +2796,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2839,8 +2839,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2873,7 +2874,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2945,7 +2946,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2963,7 +2964,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // #define CARTESIO_UI @@ -3008,15 +3009,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3231,6 +3232,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3295,12 +3297,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 3499474d2e..970ff96fe1 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 84ca3568f2..d05a822e25 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 6eb1aa24bb..7707c9f8ed 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index d0a43712e6..bfc9812838 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 8f3f02a567..962ca6187e 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -57,12 +57,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 19d851a565..2ac633c2bb 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index edc7041182..a3356de0cf 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -57,12 +57,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1010,8 +1011,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1045,7 +1046,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index be7d930851..ae8ecb2d17 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index ddf239909a..fff63a80b6 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 9f812cd3ae..99ba587a93 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3439,7 +3439,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4047,7 +4047,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4318,7 +4318,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 45c8c23b88..514eafdcaa 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2764,7 +2765,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2794,7 +2795,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2838,8 +2838,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2872,7 +2873,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2944,7 +2945,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2962,7 +2963,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3007,15 +3008,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3230,6 +3231,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3294,12 +3296,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 4519865c2a..b8b208ec9e 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 33aaa60b3b..2f67e7e414 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index dbcb525def..0f21079c8e 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 70ebd845a8..35e455cb85 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2764,7 +2765,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2794,7 +2795,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2838,8 +2838,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2872,7 +2873,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2944,7 +2945,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2962,7 +2963,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3007,15 +3008,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY // single cable EXT1 port @@ -3230,6 +3231,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3294,12 +3296,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 5837271be6..52a8cadcfc 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 2efcbb6414..cf71d46344 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 4519865c2a..b8b208ec9e 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 8d71fc4a75..30247ebc1a 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 6c89853979..e911b56c77 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 17650cfdac..e930ada8ce 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -55,12 +55,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1010,8 +1011,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1045,7 +1046,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1484,7 +1485,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1500,7 +1501,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2778,7 +2779,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2808,7 +2809,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2852,8 +2852,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2886,7 +2887,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2958,7 +2959,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2976,7 +2977,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3021,15 +3022,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3244,6 +3245,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3308,12 +3310,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index a9312a738d..c94bad5785 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3445,7 +3445,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4056,7 +4056,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4327,7 +4327,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 65a27334e2..5524362a98 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -55,12 +55,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1010,8 +1011,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1045,7 +1046,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1485,7 +1486,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1501,7 +1502,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2783,7 +2784,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2813,7 +2814,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2857,8 +2857,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2891,7 +2892,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2963,7 +2964,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2981,7 +2982,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3026,15 +3027,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3249,6 +3250,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3313,12 +3315,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 7c625a1d65..751e8c804e 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3447,7 +3447,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4058,7 +4058,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4329,7 +4329,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index aa2d08b7b4..228cc71103 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a3aaf8a656..5df7669392 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index 5dc7a4e79f..926778babc 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 5be3264aab..659ff7f063 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index b0c8a3a233..615e6363bb 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 720ced2dc5..a682666067 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4056,7 +4056,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4327,7 +4327,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 9f617cc784..1a341e4afe 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 56edc85f89..3c573579da 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index eba226ea2e..5997a1b381 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 19954f004d..363cef448a 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 30edfdc563..cb73f26605 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2762,7 +2763,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2792,7 +2793,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2836,8 +2836,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2870,7 +2871,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2942,7 +2943,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2960,7 +2961,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3005,15 +3006,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3228,6 +3229,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3292,12 +3294,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a3aaf8a656..5df7669392 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 7756648e6b..884dd49cfc 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index d4b646e25d..d0a1a26103 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index fe4062b8ee..b53a789103 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6891380cc6..1ec059258b 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 83fd30d4a5..d4f3915425 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 6ed13c1f9e..628635bd3a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 37fd8e15ad..038bf7f699 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index e3e7e23f9d..4b734e85d5 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index e60e382ba4..257d33b93a 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index e3e7e23f9d..4b734e85d5 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 588fedea28..d1bd911ce9 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 9215d6b825..a4689ef0d9 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 7dd6ac83aa..a4637ea682 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index cfa5c40e5c..2d1a40f41b 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4040,7 +4040,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4311,7 +4311,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index fe18e3cfea..71533f6993 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 43a5131958..8f9fece7dd 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 9eb712a09e..3d3a1cdd81 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index b8ec17359c..068adedf77 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index d56582ae95..9d55efa945 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index cf4c71cc1c..847c452394 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 29d8a37234..35125193ee 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 25ef0102a2..9ddc62d13b 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index 861fe8e619..394707c7fa 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index fef3dbb632..900c35de6c 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 2448f76556..34a95cfb10 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1663,7 +1664,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 3a007fae63..266b158ea1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 5338b43fff..a1f96981f7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 6d63518d87..ea394bc8b5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index a46d4109c5..ded6e2152f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 6d63518d87..ea394bc8b5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0738649f0f..a24eebf8d5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 12226ed0fe..2c86193c8f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 715dd26063..65c71f79c0 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 8ea858c33b..dddf75c3a7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index c24f1ed007..c5850020a7 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 461964b882..eb1986b8c8 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 61909d714f..2d00a96a05 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 95ecded6b8..f819a63be4 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 54085e3ff7..0e20dddf3b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index f792ca31f3..a11b0c9b5a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index d8ee20eba8..f1b86c2d43 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 4b368ead17..77ed259eab 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index 3bae0ec7df..68f9170d70 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 4b368ead17..77ed259eab 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index f2f3d5ad8a..bba9a0e000 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 024d1042f4..f8798847cd 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 0382dd5ed9..9f7638862a 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2762,7 +2763,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2792,7 +2793,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2836,8 +2836,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2870,7 +2871,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2942,7 +2943,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2960,7 +2961,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3005,15 +3006,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3228,6 +3229,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3292,12 +3294,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 3657c07407..815fbf62b7 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index d8e0e55714..2de354c868 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index 7a282f1cfc..8ff97b6a8b 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 842d4f866a..d79bfaf22b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index ebf3879e6b..1a2fdbdf76 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index ae2fc967e6..7aa310dbc9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 248884bafc..d4960eebdd 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 0905b1f566..08322a6c50 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index be426c598a..b6b1370bcd 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index 96a6fa4ce4..fa5af91af5 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 195a6c16da..a2bd3dc3bb 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 06c9b8dcdf..5bcc0c40b4 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 472c31d52a..18fba62542 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 33ab196ed7..bcd010d6f2 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 5c7d69a134..de7ce0c9d1 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 6be95eac20..e763ac722c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index dc85369cc7..7c3a941171 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index 94961f6af9..12fedbed5b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 26ca96edc8..d14a3ad192 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 201a568611..152efac658 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 9801f3a624..39eafd5d09 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index f06c425df4..47b4e16a94 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index a8c076c1eb..cd421140ca 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 6119ec716c..fa0daae912 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index e5c2c063c5..6f7193b438 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index d0773083f1..934fc64a61 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index a8c076c1eb..cd421140ca 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index a0b6eacfbd..e16755f6db 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 4ba627180e..f7abaa016d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 2f6bf8712c..0f16e778e8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index d117614bb8..332113c309 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 325dac35a5..1dbef8e5c2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d117614bb8..332113c309 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index eee88d664a..edf3caf000 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ada4209e78..c978962f58 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 024809d833..a55316cf82 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 1f99402eff..deca64023f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 474df5adcf..e822ba4ab1 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 461964b882..eb1986b8c8 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 8cd9aac355..416b8d6a75 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 81a60c8790..4d0bd85dee 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index b563e109ec..92c1ac0b15 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index f792ca31f3..a11b0c9b5a 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 34ebe5e5d5..a568274e49 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index a37ae3bca4..7b1149ca35 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 6d5cf26521..63da930b97 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index a37ae3bca4..7b1149ca35 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index d5d8a1b447..34b814c41d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 0d5ffa3691..01053618bf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 9cb1a8e6ec..fcb5597c5a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index a37ae3bca4..7b1149ca35 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index f7de8ec6fd..f569eca39b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index a37ae3bca4..7b1149ca35 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 774f9ac22d..64acad06a7 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index e92a984bee..6b6bb7d557 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3439,7 +3439,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4047,7 +4047,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4318,7 +4318,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 305a30ba78..0d68de213d 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 8112514b8d..bbf68ddb2a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 47d3cf0724..58beb7a95d 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 169f852bf0..31800b75d9 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 1dc94d7398..75ba2eeb13 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // #define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 626bf134a5..de64af39db 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 7fe689eb4d..ea772881b1 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 03cae2d5b0..5af7a78366 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3440,7 +3440,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 059166ad5b..551c1e32a3 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 89d18f922d..9a96659979 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index 41acc56c4b..cb9b712787 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index b3f13fc3f2..d90398abb7 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h index d1bbbc7304..4cb91df266 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h index 1bbcd2a000..683a32cf6b 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index d3bd92bf61..6c263488d8 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 631b918f12..721759905a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index c2569bac2d..9fcb056d96 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d3dab0e9fb..18d186fd25 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 32a20ea630..a4b81cb6b9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 517fe8d2ff..711e399a3c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index 8494ef8c41..97de989a6c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index 5f0c59b13f..aee0289613 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 2a9bb0e51a..a004bf39ee 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 4e426d1806..c47e3f6821 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 238172b599..8ccfb1f7b2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2771,7 +2772,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2801,7 +2802,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2845,8 +2845,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2879,7 +2880,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2951,7 +2952,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2969,7 +2970,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3014,15 +3015,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3240,6 +3241,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3304,12 +3306,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 5d06e64b55..59c794ed21 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 17fc61b972..8213360c6e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index c45ac965ea..14e14eb7b7 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 4099375551..e74843743a 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1019,8 +1020,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1054,7 +1055,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1498,7 +1499,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1514,7 +1515,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2794,7 +2795,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2824,7 +2825,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2868,8 +2868,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2902,7 +2903,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2974,7 +2975,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2992,7 +2993,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3037,15 +3038,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3274,6 +3275,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3338,12 +3340,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 183c74423c..50923712c0 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index f41449569a..61d1e9aba4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 631b918f12..721759905a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 41591bd980..74257a9fe2 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0b7a049f6f..2002b11f84 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 6721d99082..49607f2eca 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index a6b7d23844..c27ef4e7d6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 4f627f9263..54a4ab1e58 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 22a5bf2bb1..c06b24a22b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 0cbcaab3e0..8a775d51ab 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index af8377eaf4..01d4c6c010 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 55a6bfad48..d6a97bdf3a 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY #if ENABLED(CR10_STOCKDISPLAY) @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index cbd2d39a36..81b3a1bfe0 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 15bb41d685..c97596f650 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index e2954ab81e..0b29815cc9 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index bdf8c77223..0976dc762f 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index baca12b169..746b35afb3 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index a2ad1d4590..dbbb990fe1 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index ebbe32b228..f33c3cbb38 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 021eb628c6..a9fdcd85ea 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2747,7 +2748,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2777,7 +2778,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2821,8 +2821,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2855,7 +2856,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2927,7 +2928,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2945,7 +2946,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2990,15 +2991,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3213,6 +3214,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3277,12 +3279,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 6d95bd24be..8090ceb00f 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4050,7 +4050,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4321,7 +4321,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index ad2ce3b9cc..8158f2463d 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 83d1c7f0ba..8d821e5f78 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 7afbed733c..4cc4caa38c 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 48236cb4bc..397605d889 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index e175841e40..14b2384d1c 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -59,12 +59,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1037,8 +1038,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1072,7 +1073,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1522,7 +1523,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1538,7 +1539,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2825,7 +2826,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2855,7 +2856,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2899,8 +2899,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2933,7 +2934,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3005,7 +3006,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3023,7 +3024,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3068,15 +3069,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3291,6 +3292,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3355,12 +3357,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 94835c7862..dcf73108ef 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 8968e529be..b7bc4805d1 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1488,7 +1489,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1504,7 +1505,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2784,7 +2785,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2814,7 +2815,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2858,8 +2858,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2892,7 +2893,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2964,7 +2965,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2982,7 +2983,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3027,15 +3028,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3250,6 +3251,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3314,12 +3316,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 537a3dbd9f..74ed205650 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 3fe4dc76ca..a365949a20 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1490,7 +1491,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1506,7 +1507,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2786,7 +2787,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2816,7 +2817,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2860,8 +2860,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2894,7 +2895,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2966,7 +2967,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2984,7 +2985,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3029,15 +3030,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3252,6 +3253,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3316,12 +3318,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 904415f575..2c3162a400 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index cff50d75fd..6bbc1714b9 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 1514a373da..fe5da1aa24 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index a4a677f6a5..e33eb0813d 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index a408ce4e02..f7c00f568a 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 8b81a4d10a..ed3dcf3301 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 20aa2d396e..5bcc390652 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index ca51af415f..08000b7ad0 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 344e98ab05..720a497fc7 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 3f7d404ccb..a125d96224 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 344e98ab05..720a497fc7 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 91a79918db..e038267524 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 100bb3133c..7953739895 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 1f7bf7c079..afb9e75e5d 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 8816ba45c7..35d45f338b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index a3dabaf034..1d9cf05d15 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 363cf5f108..f353465710 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 6d39d4dcc0..51e66292a7 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index aa41432904..a62935a361 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3445,7 +3445,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4056,7 +4056,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4327,7 +4327,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 651e682697..d7e286d2d9 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index e74ef9d38c..448a6be17e 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4061,7 +4061,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4332,7 +4332,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 22cf2556c2..3098050aee 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index e74ef9d38c..448a6be17e 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4061,7 +4061,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4332,7 +4332,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 518d087d2d..6e34ffcf9c 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 61af0e51c7..664b3674b7 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index b5abed3b2e..6625cdfe88 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 1deaf8cf0e..3eee8fdf33 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4332,7 +4332,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index e47b8c2227..754d5d5cda 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1060,8 +1061,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1095,7 +1096,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1557,7 +1558,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1573,7 +1574,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2860,7 +2861,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2890,7 +2891,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2934,8 +2934,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2968,7 +2969,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3040,7 +3041,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3058,7 +3059,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3103,15 +3104,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3326,6 +3327,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3390,12 +3392,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 788703d1d9..84ebe49435 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4058,7 +4058,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4329,7 +4329,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 613412093f..c1c677be70 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1641,6 +1642,7 @@ #define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_AFTER_PROBING 7 // Z position after probing is done + #define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset @@ -2749,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 2720281b83..33a5449dc4 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 20623f3497..349ddfb156 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2765,7 +2766,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2795,7 +2796,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2839,8 +2839,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2873,7 +2874,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2945,7 +2946,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2963,7 +2964,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3008,15 +3009,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3231,6 +3232,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3295,12 +3297,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index ce3133bba0..3b94542470 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3446,7 +3446,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4332,7 +4332,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index f530711e84..5cbd2909de 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 1d13202e95..38678f17ad 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index cdef9d0ee3..9d9561e0b6 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index cc58d864b6..5b523008e8 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index ceda9a076e..137b6b970a 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 036ce05ea1..42a4b40281 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 600457013d..e759c93982 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 036ce05ea1..42a4b40281 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 99fe8cd84e..39b182e255 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 1d13202e95..38678f17ad 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 1a77fb1ed0..7f3526f09b 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 036ce05ea1..42a4b40281 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 5a33a31603..9caedabf87 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 036ce05ea1..42a4b40281 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 52063923a5..4bc74d500c 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index c21e419139..1b2be5405b 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 5d4236b381..6f5dc853f8 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index c21e419139..1b2be5405b 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 4107b659f6..6ba80d987d 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index c21e419139..1b2be5405b 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 445935c574..8a61a7faba 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index a46f2e31b8..1d0b811ff5 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index ac9dd80f80..c86e74df40 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index a46f2e31b8..1d0b811ff5 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 3345992ef3..c5e8b0b0a5 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index a46f2e31b8..1d0b811ff5 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index ed5bb85a7d..c4c9bda3be 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 16933fc56a..d1768f4e88 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 8ad1ec8513..20a2e6e246 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 20aa2d396e..5bcc390652 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 9bd2019796..4482131b86 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index a46f2e31b8..1d0b811ff5 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 3802980763..c902dcd9e9 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index bf28123aeb..036f75626f 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 585d6f7fec..ace686e962 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 16933fc56a..d1768f4e88 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index ffecef1fdb..d806a2a900 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2748,7 +2749,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2778,7 +2779,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2822,8 +2822,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2856,7 +2857,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2928,7 +2929,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2946,7 +2947,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2991,15 +2992,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3214,6 +3215,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3278,12 +3280,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 556f140c06..c0de6917de 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 27475d6725..4f4e11d71c 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 20aa2d396e..5bcc390652 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index e55a5c76df..5e56387353 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 434b932751..3337abe32b 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index bc48b4eced..364d2c66d8 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1476,7 +1477,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1492,7 +1493,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 445f362686..0e0feda849 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index b1e3cffcc8..f010027ff2 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1476,7 +1477,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1492,7 +1493,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1673,7 +1674,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 6a76085fcd..4b0063972b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1476,7 +1477,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1492,7 +1493,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 49a1029602..1491de739c 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 1d13202e95..38678f17ad 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 64b1e8af93..27b3a9c884 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 1d13202e95..38678f17ad 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 480406e9b0..2b15ba7cd5 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -999,8 +1000,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1034,7 +1035,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1464,7 +1465,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1480,7 +1481,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2747,7 +2748,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2777,7 +2778,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2821,8 +2821,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2855,7 +2856,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2927,7 +2928,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2945,7 +2946,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2990,15 +2991,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3213,6 +3214,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3277,12 +3279,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 448698ce33..8274f448aa 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 3a5a8ce447..b687a705f6 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 649e9d23d2..9ab7365785 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 2a91b5fd5f..da6822561c 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 2b0ebe9f53..c164d2dd17 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4049,7 +4049,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4320,7 +4320,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 9e0bee4b74..45cdd631bc 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index c47e513a89..1d011d8a43 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 3752ab7e2c..a55dac8390 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 0012371b84..d302eaaa3f 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -53,12 +53,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 30262f3998..2b2f084fd9 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 7ed16c4657..5926d91bed 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index d9c3a0fc6e..9c13cfd220 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index af6d0aaae4..4358eeb721 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 6fa0041fb5..c2a750136e 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 30f1af0578..9c582f85eb 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1000,8 +1001,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1035,7 +1036,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1465,7 +1466,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1481,7 +1482,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index ac3a379340..980ef9d9b0 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index c4184da7a4..edbaffbc3e 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index 421275f73d..7e662a40e7 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -69,12 +69,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1022,8 +1023,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1057,7 +1058,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1497,7 +1498,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1513,7 +1514,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2785,7 +2786,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2815,7 +2816,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2859,8 +2859,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2893,7 +2894,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2965,7 +2966,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2983,7 +2984,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3028,15 +3029,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3251,6 +3252,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3315,12 +3317,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 5ad7b456e7..410ca81712 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Kingroon/KP5L/Configuration.h b/config/examples/Kingroon/KP5L/Configuration.h index feb2cf797d..276c05b617 100644 --- a/config/examples/Kingroon/KP5L/Configuration.h +++ b/config/examples/Kingroon/KP5L/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // #define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Kingroon/KP5L/Configuration_adv.h b/config/examples/Kingroon/KP5L/Configuration_adv.h index e96e212ad9..4afa12b96f 100644 --- a/config/examples/Kingroon/KP5L/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 632ffa26ce..dc4ef1a831 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index f6fecce77f..60e7060a2c 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 6f01cc3a8b..d063fa9625 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 0fde810e56..15a4905b11 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index 4dc80ff6e5..0087394001 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -67,12 +67,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1020,8 +1021,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1055,7 +1056,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1486,7 +1487,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1502,7 +1503,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2769,7 +2770,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2799,7 +2800,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2843,8 +2843,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2877,7 +2878,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2949,7 +2950,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2967,7 +2968,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3012,15 +3013,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3235,6 +3236,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3299,12 +3301,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 3c9a7a3c6a..ee15fa9d5e 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 650df144dc..c69ed1a905 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1012,8 +1013,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1047,7 +1048,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1477,7 +1478,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1493,7 +1494,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index a37baa2a49..9f30dadc8e 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index a81d0042a6..de13f2a65e 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 0ad9ca3107..bcfd3e4687 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index e79ffb64c0..63268bf012 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 6e4296ce92..3d748dc99f 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3436,7 +3436,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4047,7 +4047,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4318,7 +4318,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 67e759cc59..b105941978 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 9bf8ae4d09..62d7a391a9 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index f2b17d7e4e..ce366aaa6e 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index cec60ab03e..983058f8e7 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 12fa3a6756..98456dde6b 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -53,12 +53,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1010,8 +1011,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1045,7 +1046,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1486,7 +1487,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1502,7 +1503,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2777,7 +2778,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2807,7 +2808,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2851,8 +2851,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2885,7 +2886,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2957,7 +2958,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2975,7 +2976,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3020,15 +3021,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3243,6 +3244,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3307,12 +3309,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 9efaea797a..25ffa75d7e 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index b92aa02b8c..7e2700758b 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index ce547a044d..8701299be3 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 33d35864f2..fe47375746 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index abfe257ca6..c26940ed97 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 495fb66b04..d6ec9b5e8c 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index cde7d53506..99104bc8b4 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index e5422c6cc5..136a0d913f 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 461785c321..0ccf1219ad 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index dcc4aa47e0..e96b0a2055 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1009,8 +1010,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1044,7 +1045,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index b9c1f19d36..261576bae2 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 34808608c2..da086b3aa2 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 2f2f765daa..b6438e1ce1 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1a7316d0dd..ddfd08651c 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 2c4fb6513f..69279ff87b 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 35343d465f..419df02737 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 5f50f94057..83cfb8f6c7 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index fbef55e09f..8b3ff7f12a 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index 6fe9b28ca9..2da5cb4c7b 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1497,7 +1498,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1513,7 +1514,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2780,7 +2781,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2810,7 +2811,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2854,8 +2854,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2888,7 +2889,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2960,7 +2961,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2978,7 +2979,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3023,15 +3024,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3246,6 +3247,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3310,12 +3312,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 15504b3df9..f867698d30 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 6806f96c4a..d4ca06903e 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index f0137b026d..ae1f7e193a 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 9eec1624ca..5a9fd9f75b 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index be4514e880..332b8c25fd 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index b8cdc62536..80f5ff9fa5 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 7415160db8..a109cc4920 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 130492d566..444e255c36 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 71c4327654..9a6aec0461 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 9f3029e4b2..660b48fd6c 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 66327f7b5d..dc6e7f1edf 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 14b6d79c0e..0f76b016be 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1027,8 +1028,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1062,7 +1063,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1496,7 +1497,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1512,7 +1513,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2806,7 +2807,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2836,7 +2837,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2880,8 +2880,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2914,7 +2915,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2986,7 +2987,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3004,7 +3005,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3049,15 +3050,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3272,6 +3273,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3336,12 +3338,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 349b4d10f8..ff553bd8cc 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3448,7 +3448,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4059,7 +4059,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4330,7 +4330,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 9c4f87abfc..99c3d98ce9 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1017,8 +1018,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1052,7 +1053,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1486,7 +1487,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1502,7 +1503,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2773,7 +2774,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2803,7 +2804,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2847,8 +2847,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2881,7 +2882,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2953,7 +2954,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2971,7 +2972,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3016,15 +3017,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3239,6 +3240,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3303,12 +3305,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 6e0dbcec7c..a71c6116cb 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3447,7 +3447,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4058,7 +4058,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4329,7 +4329,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index cae3a5d49d..ce5120fa90 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index c557a27737..48c16e97a2 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index e6df7df351..e24eced08e 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1484,7 +1485,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1500,7 +1501,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1676,8 +1677,9 @@ #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #endif -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done + #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset @@ -1700,7 +1702,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2787,7 +2789,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2817,7 +2819,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2861,8 +2862,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2895,7 +2897,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2970,7 +2972,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2988,7 +2990,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3033,15 +3035,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3256,6 +3258,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3320,12 +3323,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index ce76a78816..174666782c 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 7d2841b96e..62dbe06bc8 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 20aa2d396e..5bcc390652 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index a05e20bcd4..c2be19bc75 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index a38b3383f1..d87ecabf34 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 338c6c7e77..4b41315a8e 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index a38b3383f1..d87ecabf34 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 8f3f7e7c5b..061e567a4a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1006,8 +1007,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1041,7 +1042,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index a38b3383f1..d87ecabf34 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index a6d71132cb..de71f984dd 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1507,7 +1508,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1523,7 +1524,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2799,7 +2800,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2829,7 +2830,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2873,8 +2873,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2907,7 +2908,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2979,7 +2980,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2997,7 +2998,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3042,15 +3043,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3265,6 +3266,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3329,12 +3331,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index db42a03f69..7c944b8aef 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index 1f7f85e76e..06cd08b52c 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 7d55455fe0..ae14189d7b 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 955a014e8f..5f65739f37 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1013,8 +1014,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1048,7 +1049,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2763,7 +2764,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2793,7 +2794,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // #define RIGIDBOT_PANEL @@ -2837,8 +2837,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2871,7 +2872,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2945,7 +2946,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2963,7 +2964,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3008,15 +3009,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3231,6 +3232,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3295,12 +3297,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 0a79dfab24..2301d7b242 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index e03fcd3793..f48359d419 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 4970621b56..3e336303a3 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 69a5fca697..59ba64fa15 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 563b358d1d..1504d46ab5 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 8ecabf15da..1b22e59a5f 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index d099c5f7b6..e4dd1aa483 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index abb2d0e704..a6afd19c87 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 856a68c800..c801457e56 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 09d162b31d..4732818aef 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index ee8587516b..a8d1042348 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 4f74781e85..83ff736d44 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -64,12 +64,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1017,8 +1018,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1052,7 +1053,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1483,7 +1484,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1499,7 +1500,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2766,7 +2767,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2796,7 +2797,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2840,8 +2840,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2874,7 +2875,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2946,7 +2947,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2964,7 +2965,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3009,15 +3010,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3232,6 +3233,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3296,12 +3298,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 6a1e47d34b..ac7b8a136f 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index ceb44106ca..255e9a77fe 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2764,7 +2765,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2794,7 +2795,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2838,8 +2838,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2872,7 +2873,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2944,7 +2945,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2962,7 +2963,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3007,15 +3008,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3230,6 +3231,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3294,12 +3296,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index a55cd7a414..599b231fc3 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 39b4043277..dbeedd5344 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1472,7 +1473,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1488,7 +1489,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2762,7 +2763,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2792,7 +2793,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2836,8 +2836,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2870,7 +2871,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2942,7 +2943,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2960,7 +2961,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3005,15 +3006,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3228,6 +3229,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3292,12 +3294,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f54a58f68c..90e9ef33f4 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 2e9cb1f774..f6180d1d00 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1005,8 +1006,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1040,7 +1041,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2764,7 +2765,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2794,7 +2795,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2838,8 +2838,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2872,7 +2873,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2944,7 +2945,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2962,7 +2963,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3007,15 +3008,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3230,6 +3231,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3294,12 +3296,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index bbe588b56d..d98cce6f34 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 72ac1883ce..1fe635e751 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2767,7 +2768,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2797,7 +2798,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2841,8 +2841,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2875,7 +2876,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2947,7 +2948,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2965,7 +2966,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3010,15 +3011,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3233,6 +3234,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3297,12 +3299,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 9edeaadc9f..89bc8c5738 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index f2fc63f0c9..562689b6c3 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2767,7 +2768,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2797,7 +2798,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2841,8 +2841,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2875,7 +2876,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2947,7 +2948,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2965,7 +2966,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3010,15 +3011,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3233,6 +3234,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3297,12 +3299,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 5b7feb4eab..e0ed00d072 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index ad6ef602f0..1b821cc4f8 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2767,7 +2768,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2797,7 +2798,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2841,8 +2841,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2875,7 +2876,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2947,7 +2948,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2965,7 +2966,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3010,15 +3011,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3233,6 +3234,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3297,12 +3299,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index b416790d33..8f49de936c 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 4df6a60ad2..f6b103e8c3 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index d1d6818e5e..5c919b696a 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 1135254a89..77475880ac 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 86d7c95591..60345cb4a9 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 2d99427e47..6b3d0c2778 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2755,7 +2756,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2785,7 +2786,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2829,8 +2829,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2863,7 +2864,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2935,7 +2936,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2953,7 +2954,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2998,15 +2999,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3221,6 +3222,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3285,12 +3287,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 6dfa790784..15cb3ee704 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index c6f9cedd9f..8e713d94ca 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 441977767d..b7137f7282 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 8046d6cad5..db093b59fe 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index b20cf6651b..85df7b193c 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index 598b663724..2b7685ae7a 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index a4d341fb2f..3bef332f04 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index 11684b9316..fae249b603 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index 8d8c4c5e39..b2dfcbd97c 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index ff1e51cd4a..46a7ef471c 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index b9a182c408..45495cc1f7 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index a74e78c612..6295f64292 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index b9a182c408..45495cc1f7 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 2fe984c427..1797b4156e 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index cfdbde9270..6fc9a79277 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 008e9f948c..5c4a2c772a 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -64,12 +64,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1041,8 +1042,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1076,7 +1077,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1506,7 +1507,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1522,7 +1523,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2794,7 +2795,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2824,7 +2825,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2868,8 +2868,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2902,7 +2903,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2974,7 +2975,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2992,7 +2993,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3037,15 +3038,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3260,6 +3261,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3324,12 +3326,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index a8a1d84f02..b736019959 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 4e3584b7b2..bc8fb59162 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2764,7 +2765,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2794,7 +2795,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2838,8 +2838,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2872,7 +2873,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2944,7 +2945,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2962,7 +2963,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3007,15 +3008,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3230,6 +3231,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3294,12 +3296,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 7dc03071b0..96ce77c540 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index bd3db0344e..ca696729fa 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 7d1f7ee9bc..21a548291a 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 9c12670efb..6fe8ff64bd 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index 75d05fb138..efc33b2902 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 3f86d8a607..b48f10674e 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index f2b2692e71..48f56015ab 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1010,8 +1011,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1045,7 +1046,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index d53a3b9fe7..da54402170 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index ea7ebc4028..a4028791d6 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 09dc8c6539..904bb45fe6 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 55f8d10f06..433c0fd115 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3446,7 +3446,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4057,7 +4057,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4328,7 +4328,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 1532469d17..bbf7905bdf 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2751,7 +2752,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2781,7 +2782,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2825,8 +2825,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2859,7 +2860,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2931,7 +2932,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2949,7 +2950,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2994,15 +2995,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3217,6 +3218,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3281,12 +3283,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 184d3d6ead..99935cf6b6 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3446,7 +3446,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4057,7 +4057,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4328,7 +4328,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 7e1daa9aa8..46562eb0a9 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3222,6 +3223,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3286,12 +3288,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index 3b63d4a787..fae2d808bd 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1037,8 +1038,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1072,7 +1073,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1502,7 +1503,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1518,7 +1519,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2784,7 +2785,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2814,7 +2815,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2858,8 +2858,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2892,7 +2893,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2964,7 +2965,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2982,7 +2983,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3027,15 +3028,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3250,6 +3251,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3314,12 +3316,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 77daf9b885..9e2b225d96 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 8516f9de20..a08a408189 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1468,7 +1469,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1484,7 +1485,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 2d10552e5f..2e8b3aa487 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index c271357348..883a9dad86 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1016,8 +1017,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1051,7 +1052,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1485,7 +1486,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1501,7 +1502,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2780,7 +2781,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2810,7 +2811,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2854,8 +2854,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2888,7 +2889,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2960,7 +2961,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2978,7 +2979,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3023,15 +3024,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3246,6 +3247,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3310,12 +3312,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 4b5e783a46..d53753cded 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 8665c6b832..96ca99196c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1017,8 +1018,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1052,7 +1053,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1486,7 +1487,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1502,7 +1503,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2781,7 +2782,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2811,7 +2812,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2855,8 +2855,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2889,7 +2890,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2961,7 +2962,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2979,7 +2980,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3024,15 +3025,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3247,6 +3248,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3311,12 +3313,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 4b5e783a46..d53753cded 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 978079ea3d..4247b2279e 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1024,8 +1025,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1059,7 +1060,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1497,7 +1498,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1513,7 +1514,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2794,7 +2795,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2824,7 +2825,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2868,8 +2868,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2902,7 +2903,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2974,7 +2975,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2992,7 +2993,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3037,15 +3038,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3260,6 +3261,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3324,12 +3326,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 4b5e783a46..d53753cded 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 03f58d2355..8b27eda77b 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1488,7 +1489,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1504,7 +1505,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2787,7 +2788,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2817,7 +2818,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2861,8 +2861,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2895,7 +2896,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2967,7 +2968,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2985,7 +2986,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3030,15 +3031,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3253,6 +3254,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3317,12 +3319,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index cd92327229..074caf0d4a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3449,7 +3449,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4060,7 +4060,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4331,7 +4331,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index c4d3510c99..e48b24e0d3 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1488,7 +1489,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1504,7 +1505,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2787,7 +2788,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2817,7 +2818,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2861,8 +2861,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2895,7 +2896,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2967,7 +2968,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2985,7 +2986,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3030,15 +3031,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3253,6 +3254,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3317,12 +3319,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 79c23fbf9c..e82e3d9c21 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3449,7 +3449,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4060,7 +4060,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4331,7 +4331,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 95bdc5017f..923049d678 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1014,8 +1015,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1049,7 +1050,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1483,7 +1484,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1499,7 +1500,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2779,7 +2780,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2809,7 +2810,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2853,8 +2853,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2887,7 +2888,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2959,7 +2960,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2977,7 +2978,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3022,15 +3023,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3245,6 +3246,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3309,12 +3311,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index c35cf6a529..c01e1d6b67 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 836a6bf085..3d7b06dd51 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index cb3e537c12..ec9f388ce8 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 95b80db187..dbc3639aa2 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 48ab76c7c2..7469f199dc 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 355121a5c9..d136e675cf 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2742,7 +2743,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2772,7 +2773,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2816,8 +2816,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2850,7 +2851,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2922,7 +2923,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2940,7 +2941,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2985,15 +2986,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3196,6 +3197,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3260,12 +3262,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 5dfc506f9b..51680f3096 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 77193d8734..313280bc14 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -50,12 +50,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1013,8 +1014,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1048,7 +1049,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1481,7 +1482,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1497,7 +1498,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2766,7 +2767,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2796,7 +2797,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2840,8 +2840,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2874,7 +2875,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2946,7 +2947,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2964,7 +2965,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3009,15 +3010,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 7f1a1ddb68..7b170ea22f 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index e87e16d993..1e9b3115b5 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 85f5c6f871..372a2d4a53 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index a093970fc7..c86784138a 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index be12ca9e1b..b356612b10 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index a602dae8c1..dc41bbf3b9 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1667,7 +1668,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2767,7 +2768,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2797,7 +2798,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2841,8 +2841,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2875,7 +2876,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2947,7 +2948,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2965,7 +2966,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3010,15 +3011,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3233,6 +3234,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3297,12 +3299,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 4b1cbedb42..6dd634c033 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3440,7 +3440,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 528b9a612d..67246496f1 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index dd6b0e96e5..a344dfe63e 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index c65df61c50..96c9ab09cc 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -72,12 +72,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1030,8 +1031,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1065,7 +1066,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1501,7 +1502,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1517,7 +1518,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2791,7 +2792,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2822,7 +2823,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2866,8 +2866,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2900,7 +2901,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2975,7 +2976,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2993,7 +2994,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3038,15 +3039,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3263,6 +3264,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3327,12 +3329,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 94389c31d1..9ac3492bc3 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -199,7 +199,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3455,7 +3455,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4066,7 +4066,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4337,7 +4337,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 82936b2fe4..f239d83a7e 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -75,12 +75,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1033,8 +1034,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1068,7 +1069,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1504,7 +1505,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1520,7 +1521,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2795,7 +2796,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2827,7 +2828,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2871,8 +2871,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2905,7 +2906,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2977,7 +2978,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2995,7 +2996,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3040,15 +3041,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3265,6 +3266,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3329,12 +3331,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index d3b30afc8f..0eb0b340d8 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -199,7 +199,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3455,7 +3455,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4066,7 +4066,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4337,7 +4337,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index ea088d68ed..41b1574bc3 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 6b98d894a2..a0aeae7ee8 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 2b0cf57563..e399dca3f1 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 6b98d894a2..a0aeae7ee8 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0e6c97aec9..dd328c3955 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // #define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 531610e61d..5101330c6c 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index ce69d72d96..c58d0a9169 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1015,8 +1016,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1050,7 +1051,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2763,7 +2764,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2793,7 +2794,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2837,8 +2837,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2871,7 +2872,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2943,7 +2944,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2961,7 +2962,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3006,15 +3007,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3229,6 +3230,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3293,12 +3295,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index b43548eb4a..4e3030a8ba 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 5a21ce0747..520c912a79 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index e9d45b472e..7c32599a9e 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 8a5cffbd15..30b26ae4cf 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 34e573a29b..10687380b2 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 002380ffde..40b6c808b8 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 52afdf2d25..94552736e7 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 3c5142993a..4c9735851d 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index f6e7189fac..9c1ed44dae 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index c85d88c2bd..158866c622 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 22a45cf26d..ff5f2c811a 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 43d71a31b9..aca37dea2e 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 4871960efb..8cacc4009d 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2749,7 +2750,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2779,7 +2780,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2823,8 +2823,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2857,7 +2858,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2929,7 +2930,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2947,7 +2948,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2992,15 +2993,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3215,6 +3216,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3279,12 +3281,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 43d71a31b9..aca37dea2e 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 8605ddb1e8..4a504a4926 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 726a7483e5..6bf46d007c 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 8f15a7dd0e..d24fc86e60 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1466,7 +1467,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1482,7 +1483,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3216,6 +3217,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3280,12 +3282,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 436531674c..142432b942 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 2ca5151657..20780a3493 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -50,12 +50,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1471,7 +1472,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1487,7 +1488,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2754,7 +2755,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2784,7 +2785,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2828,8 +2828,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2862,7 +2863,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2934,7 +2935,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2952,7 +2953,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2997,15 +2998,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3220,6 +3221,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3284,12 +3286,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 81a97b547e..23a9592559 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 5d4e91a8a1..08b8d0fd48 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -50,12 +50,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1003,8 +1004,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1038,7 +1039,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1470,7 +1471,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1486,7 +1487,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2753,7 +2754,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2783,7 +2784,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2827,8 +2827,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2861,7 +2862,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2933,7 +2934,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2951,7 +2952,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2996,15 +2997,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index ba19ead017..fab4677c43 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index caa5b37c8f..687c8ab242 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -63,12 +63,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1047,8 +1048,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1082,7 +1083,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1523,7 +1524,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1539,7 +1540,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2818,7 +2819,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2848,7 +2849,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2892,8 +2892,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2926,7 +2927,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2998,7 +2999,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3016,7 +3017,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3061,15 +3062,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3284,6 +3285,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3348,12 +3350,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 8b83c2c058..726550ff14 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4055,7 +4055,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4326,7 +4326,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index ac981a3d51..aa7684b10d 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -63,12 +63,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1046,8 +1047,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1081,7 +1082,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1528,7 +1529,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1544,7 +1545,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2822,7 +2823,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2852,7 +2853,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2896,8 +2896,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2930,7 +2931,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -3002,7 +3003,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -3020,7 +3021,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3065,15 +3066,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3288,6 +3289,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3352,12 +3354,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 6171cc73e7..b6167bce0c 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 81ed44834c..ed01307fae 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 14ce9154a5..0e1166f642 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3445,7 +3445,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4056,7 +4056,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4327,7 +4327,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 94e6d1743d..131a31a4c9 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 7aa2f9541b..48c14057fc 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 904824e08e..6ae0fd53e1 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -51,12 +51,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2763,7 +2764,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2793,7 +2794,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2837,8 +2837,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2871,7 +2872,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2943,7 +2944,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2961,7 +2962,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3006,15 +3007,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3229,6 +3230,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3293,12 +3295,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 7aa2f9541b..48c14057fc 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index e5e4219592..a431df5cb9 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 7a5d7ba708..912676e080 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3441,7 +3441,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4052,7 +4052,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4323,7 +4323,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 016137a1ee..5d543e1c7c 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1001,8 +1002,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1036,7 +1037,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1670,7 +1671,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 6ed4bb0da3..c94c92e58c 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index dd184e7fb8..9545264da2 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 68572c97ff..c50d5d7972 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2769,7 +2770,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2799,7 +2800,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2843,8 +2843,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2877,7 +2878,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2949,7 +2950,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2967,7 +2968,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3012,15 +3013,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3235,6 +3236,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3299,12 +3301,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 503e7ce194..dcd8d41ed1 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index cfae1508cd..af2aadfbb4 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2760,7 +2761,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2790,7 +2791,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2834,8 +2834,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2868,7 +2869,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2940,7 +2941,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2958,7 +2959,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3003,15 +3004,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3226,6 +3227,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3290,12 +3292,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 34d11f5cda..4a5d56e9c7 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 28096be184..20049d36d7 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 34d11f5cda..4a5d56e9c7 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 04d6145343..63ba959b22 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 5b406897ee..7d5e47d850 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index d4869bac04..c34e8d46d7 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index f511275466..fe4302e094 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index d3065c51d0..d49e1462c7 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index f511275466..fe4302e094 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 03a83fd4ea..2a1055ac6e 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index f511275466..fe4302e094 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 6d0ec2bcef..a8c41ffe6e 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index f511275466..fe4302e094 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4051,7 +4051,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4322,7 +4322,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index ffae979490..b372c8823e 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2758,7 +2759,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2788,7 +2789,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2832,8 +2832,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2866,7 +2867,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2938,7 +2939,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2956,7 +2957,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3001,15 +3002,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3224,6 +3225,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3288,12 +3290,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index b4778f5d36..2683466ca6 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 6104176954..a1de4715e6 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -53,12 +53,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1479,7 +1480,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1495,7 +1496,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -1676,7 +1677,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -2762,7 +2763,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2792,7 +2793,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2836,8 +2836,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2870,7 +2871,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2942,7 +2943,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2960,7 +2961,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3005,15 +3006,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3228,6 +3229,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3292,12 +3294,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 631a895ed4..3e2fceb88f 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 04619071b8..e262d02bca 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 56d0447caa..f35e728578 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 369b1a0aa3..c9e04c3237 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1467,7 +1468,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1483,7 +1484,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2750,7 +2751,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2780,7 +2781,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2824,8 +2824,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2858,7 +2859,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2930,7 +2931,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2948,7 +2949,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2993,15 +2994,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3219,6 +3220,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3283,12 +3285,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index fd4cb2c8b5..76c72174b8 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 40d2af8fa7..f18544e57d 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1475,7 +1476,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1491,7 +1492,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2765,7 +2766,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2795,7 +2796,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2839,8 +2839,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2873,7 +2874,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2945,7 +2946,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2963,7 +2964,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3008,15 +3009,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3231,6 +3232,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3295,12 +3297,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 98679879d6..cdf83b8552 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 603d1d5608..d6957fda4f 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -59,12 +59,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1022,8 +1023,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1057,7 +1058,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1501,7 +1502,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1517,7 +1518,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2791,7 +2792,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2821,7 +2822,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2865,8 +2865,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2899,7 +2900,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2971,7 +2972,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2989,7 +2990,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3034,15 +3035,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3257,6 +3258,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3321,12 +3323,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index b41de669fa..8e21abc035 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3444,7 +3444,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4058,7 +4058,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4329,7 +4329,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 0cb056b0b6..2af59984bc 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 5b406897ee..7d5e47d850 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 2a571195ec..3f00853aad 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 9cd3b4fbe4..3686766cf0 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 4afe31c045..ac91535354 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1474,7 +1475,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1490,7 +1491,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -2759,7 +2760,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2789,7 +2790,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2833,8 +2833,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2867,7 +2868,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2939,7 +2940,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2957,7 +2958,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3002,15 +3003,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3225,6 +3226,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3289,12 +3291,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 383446cfc4..57c95d4535 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -52,12 +52,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1007,8 +1008,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1042,7 +1043,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1486,7 +1487,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1502,7 +1503,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ #define Z_PROBE_ALLEN_KEY @@ -1666,7 +1667,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -2778,7 +2779,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2808,7 +2809,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2852,8 +2852,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2886,7 +2887,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2958,7 +2959,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2976,7 +2977,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3021,15 +3022,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3244,6 +3245,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3308,12 +3310,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 8b2cb301d8..1c99da225d 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1480,7 +1481,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1496,7 +1497,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2763,7 +2764,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2793,7 +2794,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2837,8 +2837,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2871,7 +2872,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2943,7 +2944,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2961,7 +2962,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3006,15 +3007,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3229,6 +3230,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3293,12 +3295,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 860610cd9b..7004fa44bf 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3443,7 +3443,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4054,7 +4054,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4325,7 +4325,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 24733a3594..014d11ce11 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1008,8 +1009,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1043,7 +1044,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2757,7 +2758,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2787,7 +2788,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2831,8 +2831,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2865,7 +2866,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2937,7 +2938,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2955,7 +2956,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3000,15 +3001,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3223,6 +3224,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3287,12 +3289,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index e3e8194429..8e60f9e45e 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index 90ac77ad93..2b12f7a80e 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1013,8 +1014,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1048,7 +1049,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1478,7 +1479,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1494,7 +1495,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2761,7 +2762,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2791,7 +2792,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2835,8 +2835,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2869,7 +2870,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2941,7 +2942,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2959,7 +2960,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -3004,15 +3005,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3227,6 +3228,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3291,12 +3293,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 370a1eb48d..8f029cf420 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 79f7196abd..d91ede7a2d 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -988,8 +989,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1023,7 +1024,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1453,7 +1454,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1469,7 +1470,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2736,7 +2737,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2766,7 +2767,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2810,8 +2810,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2844,7 +2845,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2916,7 +2917,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2934,7 +2935,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2979,15 +2980,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3202,6 +3203,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3266,12 +3268,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index b108ba4798..b72e692da5 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 03f064b07a..904caec781 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1004,8 +1005,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1039,7 +1040,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1469,7 +1470,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1485,7 +1486,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2752,7 +2753,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2782,7 +2783,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2826,8 +2826,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2860,7 +2861,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2932,7 +2933,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2950,7 +2951,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2995,15 +2996,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3218,6 +3219,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3282,12 +3284,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f861908b68..7c93563b4c 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 838188eae5..9e16a0ad90 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -48,12 +48,13 @@ * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ + * Průša Calculator: https://blog.prusa3d.com/calculator_3416/ * * Calibration Guides: https://reprap.org/wiki/Calibration * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * https://youtu.be/wAL9d7FgInk + * https://teachingtechyt.github.io/calibration.html * * Calibration Objects: https://www.thingiverse.com/thing:5573 * https://www.thingiverse.com/thing:1278865 @@ -1002,8 +1003,8 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #elif ENABLED(MP_SCARA) @@ -1037,7 +1038,7 @@ // Radius around the center where the arm cannot reach #define MIDDLE_DEAD_ZONE_R 0 // (mm) - // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/ #define THETA_HOMING_OFFSET 0 #define PSI_HOMING_OFFSET 0 #endif @@ -1473,7 +1474,7 @@ #define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed #endif -// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J +// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector // When the pin is defined you can use M672 to set/reset the probe sensitivity. //#define DUET_SMART_EFFECTOR #if ENABLED(DUET_SMART_EFFECTOR) @@ -1489,7 +1490,7 @@ //#define SENSORLESS_PROBING /** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. */ //#define Z_PROBE_ALLEN_KEY @@ -2756,7 +2757,7 @@ // // Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ +// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/ // //#define RADDS_DISPLAY @@ -2786,7 +2787,6 @@ // // RigidBot Panel V1.0 -// http://www.inventapart.com/ // //#define RIGIDBOT_PANEL @@ -2830,8 +2830,9 @@ // // Sainsmart (YwRobot) LCD Displays // -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// These require LiquidCrystal_I2C library: +// https://github.com/MarlinFirmware/New-LiquidCrystal +// https://github.com/fmalpartida/New-LiquidCrystal/wiki // //#define LCD_SAINSMART_I2C_1602 //#define LCD_SAINSMART_I2C_2004 @@ -2864,7 +2865,7 @@ // // -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD // //#define SAV_3DLCD @@ -2936,7 +2937,7 @@ // // MaKr3d Makr-Panel with graphic controller and SD support. -// https://reprap.org/wiki/MaKr3d_MaKrPanel +// https://reprap.org/wiki/MaKrPanel // //#define MAKRPANEL @@ -2954,7 +2955,7 @@ // // Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // //#define CARTESIO_UI @@ -2999,15 +3000,15 @@ // // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0 // //#define BTT_MINI_12864_V1 // -// Factory display for Creality CR-10 +// Factory display for Creality CR-10 / CR-7 / Ender-3 // https://www.aliexpress.com/item/32833148327.html // -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// Connect to EXP1 on RAMPS and compatible boards. // //#define CR10_STOCKDISPLAY @@ -3222,6 +3223,7 @@ // // 480x320, 3.5", SPI Display with Rotary Encoder from MKS // Usually paired with MKS Robin Nano V2 & V3 +// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35 // //#define MKS_TS35_V2_0 @@ -3286,12 +3288,14 @@ //#define ANET_ET5_TFT35 // -// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX +// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX +// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware // //#define BIQU_BX_TFT70 // // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series +// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1 // //#define BTT_TFT35_SPI_V1_0 diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index cced291cdf..a8349601af 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -190,7 +190,7 @@ /** * Hephestos 2 24V heated bed upgrade kit. - * https://store.bq.com/en/heated-bed-kit-hephestos2 + * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/ */ //#define HEPHESTOS2_HEATED_BED_KIT #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) @@ -3442,7 +3442,7 @@ //#define PHOTOGRAPH_PIN 23 // Canon Hack Development Kit - // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ + // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK_PIN 4 // Optional second move with delay to trigger the camera shutter @@ -4053,7 +4053,7 @@ * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder * Github: https://github.com/Aus3D/MagneticEncoder * - * Supplier: https://aus3d.com.au/magnetic-encoder-module + * Supplier: https://aus3d.com.au/products/magnetic-encoder-module * Alternative Supplier: https://reliabuild3d.com/ * * Reliabuild encoders have been modified to improve reliability. @@ -4324,7 +4324,7 @@ /** * Using a sensor like the MMU2S * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S. - * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11 + * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11 */ #if HAS_PRUSA_MMU2S #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries)