3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-16 03:07:57 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ FILAMENT_MOTION_DISTANCE_MM

Browse source 
MarlinFirmware/Marlin#27812
This commit is contained in:
Scott Lahteine 2025-04-22 14:31:51 -05:00
parent 23cce511a5
commit f01c64b9d1
382 changed files with 1910 additions and 764 deletions
Download patch file Download diff file Expand all files Collapse all files

7
config/default/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/3DMatik/XL/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -2120,8 +2120,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2157,7 +2160,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Alfawise/U20/Configuration.h
View file

@ -2121,8 +2121,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2158,7 +2161,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A2plus/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A6/Configuration.h
View file

@ -2117,8 +2117,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2154,7 +2157,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A8/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A8plus/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/A9/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/E10/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET4+/Configuration.h
View file

@ -2047,8 +2047,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2084,7 +2087,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -2047,8 +2047,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2084,7 +2087,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET4/Configuration.h
View file

@ -2047,8 +2047,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2084,7 +2087,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET4X/Configuration.h
View file

@ -2047,8 +2047,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2084,7 +2087,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET5/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Anet/ET5X/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -2045,8 +2045,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2082,7 +2085,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -2097,8 +2097,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2134,7 +2137,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -2054,8 +2054,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2091,7 +2094,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/AnyCubic/i3/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/ArmEd/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Hornet/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -2057,8 +2057,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2094,7 +2097,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIBO/TouchX/default - BLTouch/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -2039,8 +2039,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2076,7 +2079,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -2039,8 +2039,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2076,7 +2079,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/B1/Configuration.h
View file

@ -2052,8 +2052,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2089,7 +2092,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/BX/Configuration.h
View file

@ -2063,8 +2063,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2100,7 +2103,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BIQU/Thunder Standard/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BQ/Hephestos/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -2055,8 +2055,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2092,7 +2095,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/BQ/WITBOX/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/CNC/miniRambo/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/CTC/A13/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/CTC/Bizer/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Cartesio/Configuration.h
View file

@ -2057,8 +2057,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2094,7 +2097,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Copymaster3D/300/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Copymaster3D/400/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Copymaster3D/500/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Max/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2049,8 +2049,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2086,7 +2089,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2049,8 +2049,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2086,7 +2089,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
View file

@ -2050,8 +2050,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2087,7 +2090,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
View file

@ -2043,8 +2043,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2080,7 +2083,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h
View file

@ -2045,8 +2045,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2082,7 +2085,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -2061,8 +2061,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2098,7 +2101,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h
View file

@ -2064,8 +2064,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2101,7 +2104,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10 V3/Stock/Configuration.h
View file

@ -2064,8 +2064,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2101,7 +2104,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2040,8 +2040,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2077,7 +2080,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10/CrealityV1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S Pro/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-10S/CrealityV1/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-20/Stock/Configuration.h
View file

@ -2044,8 +2044,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2081,7 +2084,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-30 PrintMill/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-6 SE/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/CR-8/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-2/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Max Neo/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Max/Configuration.h
View file

@ -2045,8 +2045,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2082,7 +2085,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Neo/Configuration.h
View file

@ -2042,8 +2042,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2079,7 +2082,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h
View file

@ -2041,8 +2041,11 @@
//#define FILAMENT_MOTION_SENSOR //#define FILAMENT_MOTION_SENSOR
#if ENABLED(FILAMENT_MOTION_SENSOR) #if ENABLED(FILAMENT_MOTION_SENSOR)
//#define FILAMENT_SWITCH_AND_MOTION //#define FILAMENT_SWITCH_AND_MOTION // Define separate pins below to sense motion
#if ENABLED(FILAMENT_SWITCH_AND_MOTION) #if ENABLED(FILAMENT_SWITCH_AND_MOTION)
#define FILAMENT_MOTION_DISTANCE_MM 3.0 // (mm) Missing distance required to trigger runout
#define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each. #define NUM_MOTION_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_MOTION#_PIN for each.
//#define FIL_MOTION1_PIN -1 //#define FIL_MOTION1_PIN -1
@ -2078,7 +2081,7 @@
//#define FIL_MOTION8_STATE LOW //#define FIL_MOTION8_STATE LOW
//#define FIL_MOTION8_PULLUP //#define FIL_MOTION8_PULLUP
//#define FIL_MOTION8_PULLDOWN //#define FIL_MOTION8_PULLDOWN
#endif #endif // FILAMENT_SWITCH_AND_MOTION
#endif // FILAMENT_MOTION_SENSOR #endif // FILAMENT_MOTION_SENSOR
#endif // FILAMENT_RUNOUT_DISTANCE_MM #endif // FILAMENT_RUNOUT_DISTANCE_MM
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

Some files were not shown because too many files have changed in this diff Show more