✨ MAG_MOUNTED_PROBE_SERVO_NR

MarlinFirmware/Marlin#27551

Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com>

config/default/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/3DMatik/XL/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -1614,6 +1614,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Alfawise/U20/Configuration.h

@@ -1615,6 +1615,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AliExpress/CL-260/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A2/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A2plus/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A6/Configuration.h

@@ -1562,6 +1562,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A8/Configuration.h

@@ -1548,6 +1548,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A8plus/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/A9/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/E10/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/E16/Stock/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET4+/Configuration.h

@@ -1551,6 +1551,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET4-Pro/Configuration.h

@@ -1551,6 +1551,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET4/Configuration.h

@@ -1551,6 +1551,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET4X/Configuration.h

@@ -1551,6 +1551,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET5-Pro/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET5/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Anet/ET5X/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/Chiron/Configuration.h

@@ -1549,6 +1549,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/Vyper/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h

@@ -1594,6 +1594,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h

@@ -1556,6 +1556,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/AnyCubic/i3/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/ArmEd/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Genius Pro/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Genius/BLTouch/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Genius/V1/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Hornet/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h

@@ -1561,6 +1561,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Sidewinder X1/V1/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Artillery/Sidewinder X2/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Azteeg/X5GT/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIBO/TouchX/default - BLTouch/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/B1 SE Plus/Configuration.h

@@ -1543,6 +1543,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/B1 SE/Configuration.h

@@ -1543,6 +1543,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/B1/Configuration.h

@@ -1554,6 +1554,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/BX/Configuration.h

@@ -1567,6 +1567,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/Hurakan/Configuration.h

@@ -1548,6 +1548,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BIQU/Thunder Standard/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BQ/Hephestos/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1559,6 +1559,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/BQ/WITBOX/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/CNC/miniRambo/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/CTC/A13/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/CTC/Bizer/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Cartesio/Configuration.h

@@ -1561,6 +1561,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Copymaster3D/300/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Copymaster3D/400/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Copymaster3D/500/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 Max/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1553,6 +1553,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1553,6 +1553,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -1554,6 +1554,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h

@@ -1547,6 +1547,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 V2/Configuration.h

@@ -1563,6 +1563,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10 V3/Configuration.h

@@ -1564,6 +1564,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1544,6 +1544,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1544,6 +1544,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S Pro/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-20/Stock/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-30 PrintMill/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-6 SE/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/CR-8/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-2/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-3 Max Neo/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-3 Max/Configuration.h

@@ -1549,6 +1549,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-3 Neo/Configuration.h

@@ -1546,6 +1546,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -1545,6 +1545,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed