diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 188b980a05..7abed0607e 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index 9f2be80c22..ce7b293200 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 71d50599dc..9750f99de3 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 4aac7be1a6..76784f60f2 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 042b909ba4..3d3337c41b 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1213,14 +1213,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 80943e6b67..860b8702a7 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index b18a0e073b..71691beee6 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index ed0698d630..372aeab785 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index ed0698d630..372aeab785 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 0cd774e85e..60648398b9 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 11c39156d9..97ca9e2476 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 67ae82a48a..a9aa191401 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 0a576e92e3..ee0250cc91 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 2f0dee89d7..b2716cb7b9 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index a3527df820..c93c5e2a6d 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index a41ac27069..a2fcbe40e2 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index c08adad527..a072b4cde4 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index c08adad527..a072b4cde4 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 4e22c28f31..2524f643b0 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 4e22c28f31..2524f643b0 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 6d2a306e6c..b6567bf7e9 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 6d2a306e6c..b6567bf7e9 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 6d2a306e6c..b6567bf7e9 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index e98a5b1846..8f6f0e04fc 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index ff79879354..660f77fc60 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index eabdfc97e4..ea72aa4ac7 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 1696f0cf48..68d0679fed 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 733ea314f2..f593a9351d 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 68973bf102..d09a3ebb32 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 3a0c13041a..4394c941b7 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index ce4ae473dd..128bc6ca80 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index a3cf5a2181..02270e2467 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1209,14 +1209,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index cc13729b62..8d633d47b7 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index a46b35d2a8..934cf6a5a0 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 6afe39cb5c..efc8ebf4a1 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 0ed13a1505..ccd27b5f1c 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 5befcf4876..65aa609de4 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 6afe39cb5c..efc8ebf4a1 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 78264f8e31..e5b03f2ae6 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 3ecbb98915..321b4c8b64 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 714e411a88..9ffa49b4a1 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 4ff58aea19..eeb25f3d32 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 2794ce4081..ddb3def01e 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 3a6be1305d..136bdd011d 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index e1c96330c2..a347250be6 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -1205,14 +1205,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index cd974815c0..9dba300be3 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -1205,14 +1205,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 852a5c36d3..e0f957e360 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index bf81bcae75..d443464504 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index d40b19f975..b6cf8dd505 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index bf81bcae75..d443464504 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 10b199efaa..650da405b8 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 334d4642ea..ae7fdeea02 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 276d9a0a67..e0f50dcb63 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index e4355fbc38..3f22513be2 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7933209daa..27303e012f 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 447a6cb673..6893ea7742 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 2bb96e0f07..065bfbae7c 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index ac2c0d1cd9..1a28485172 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1203,14 +1203,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 953a4bea7a..174b564161 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 911dc50ccf..d548242a79 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index b4e3908ce7..83e51e4265 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 953a4bea7a..174b564161 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 665713c06c..c0626ed04c 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 1013ae20fe..c80950715d 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index d561898741..9a4481d6c8 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1206,14 +1206,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 27f53a29db..59ea336835 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index cc88e496bf..1f13bec617 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 6ea5b3c24a..a6dcee9dac 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index c1ed05628a..7800c70696 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index c344158970..c52fe6f725 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 439fd6a472..c99847ee51 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 27f53a29db..59ea336835 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index dd9b0d7627..2603cdd3ff 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index 4aa35a2de0..59303d6837 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 981b6efc03..b981b17287 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index c414a98072..af1a8508e6 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 81fd0bdaeb..e56a0ea624 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 81fd0bdaeb..e56a0ea624 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 6b367cdf43..3085fc5683 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 686bb627b2..07daf05314 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 1b3604953e..d39c8ae287 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 42e47337b7..b8d349fb36 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 2ef8c5b3c4..c9d5ec8984 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index e1c314991c..7d0121dced 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h index ddcb5e1bac..2c98d3186f 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 93c25cf9cf..276827068e 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 1a5482cb38..7ee2f6d47b 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 92223d6354..9ca227dcdf 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index fb0ded917b..108964cd98 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index fb0ded917b..108964cd98 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ab079f9795..773ff0c109 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index d0a5f21157..29abc7b57b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index 2001d76d44..cb2a42cd5c 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 6482837933..57165e808c 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 6d94eb89c7..b74ae9d68b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index b33465e01a..c3da8062fe 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index d4934ba587..8341fa5f73 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ #define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index d4934ba587..8341fa5f73 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ #define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index e368f648c2..a707588772 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index ad6e1b9056..928a0480fe 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index 4477ea31bb..69a5c8a107 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 315c76221f..fbd27746c9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index a2c302c2e5..097f5d4e69 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index cdc32f9664..f2a99d80d7 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 70839e8f09..6678308765 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 634ca9571c..f75475b4e1 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 0649d1f280..bc532c0cfb 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index a89f22443e..f73632fd57 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 79ce23d331..69d84e0974 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 0b5618f675..1513361e86 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index ecdda2d400..809384869b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 5936043249..6fc6c42da5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index ecdda2d400..809384869b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 6dc018e975..3defcd0eab 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 29eb3349f4..50d171460e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 29eb3349f4..50d171460e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 885b2a553c..c8af126d83 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index b4dd261990..68deddaee6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index 2001d76d44..cb2a42cd5c 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 6482837933..57165e808c 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 7a634e604b..1ebfa351b3 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index b33465e01a..c3da8062fe 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 84fb7d287d..1cf0f76f26 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 84fb7d287d..1cf0f76f26 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 269b74e097..01fbdb4737 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 84fb7d287d..1cf0f76f26 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 84fb7d287d..1cf0f76f26 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 279d13cf7d..7190ff65d3 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1203,14 +1203,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 62aafcb2f8..36e6d0dfd7 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index d03764b5ca..bbe5f03ceb 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 7ad01b3667..60ab72efab 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 048da1d0dd..35c3795713 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index c1e2233fb5..9829efbc08 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 6ff6475e5e..a88c112783 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index 4c3cccac3e..79491c5929 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 9b90074168..4555d982e6 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index a681a92894..0db96241a6 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 1a6e522461..a39e3a1549 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index b677f14c15..7258aab7f1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index a15bf365d4..6c59723116 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 230b17d54b..c6e1c318b8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 184b26e297..e9a3f65859 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 9babfdae3f..2c94cccc1a 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 6eae5a1f81..423cad37ef 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -1207,14 +1207,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index a681a92894..0db96241a6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 4e55cf1ebb..095b526940 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 0e3c04f3f2..9cdaef1286 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 8a6d350c85..25825dbce2 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index b0ca1e7a13..13aee6c9c1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index ef64eef1fa..9dd3bd1354 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 9fb7ee859c..aa8d977222 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index f86dddbb63..09c8125bd4 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index b72c14b2bb..66f56b4fce 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 334d5d2699..1f32c39862 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 59c65c0b47..bbe5decad6 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 13f206d111..ebd7b110ce 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 6cecafe55f..a9ed8a6b63 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index b361c785b1..9bb4f17550 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index e9737e6551..78c4e8c7b1 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index b6b652f115..e5588da18a 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 75a8ae7cd0..5a192adee8 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index f7e260c1f3..5c531830a5 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index f9caf7e0fd..7c8dc68d69 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index f2e1101605..2c217c053c 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index d84277bd56..9cdf122fc7 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index c43e4c26e9..3f57927bff 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 453c009d89..35c5d51501 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 453c009d89..35c5d51501 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index b3f5577ebc..3dd9334cc5 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index aca0c77d8b..dce8a7a904 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 415e51feef..6f09796930 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index cd56fe182a..0b2fe9f5f6 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index c10ee65d09..57c58d0080 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index c10ee65d09..57c58d0080 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 34672673d7..fddd223348 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index caf2b91cb7..5af2503e36 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 0108f66362..434aa5eb0e 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index b98e93a27e..6cf0b4086a 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index caf24a8df1..21c3dc4f0b 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1208,14 +1208,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 2036859c03..e0f081a341 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index c33e338953..6af352078f 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 758debed7e..7baec22266 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 758debed7e..7baec22266 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 2036859c03..e0f081a341 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 758debed7e..7baec22266 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 758debed7e..7baec22266 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 166aeae058..15a2060921 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 166aeae058..15a2060921 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 166aeae058..15a2060921 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 6a3a87b6de..fa2fe186b3 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 6a3a87b6de..fa2fe186b3 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 6a3a87b6de..fa2fe186b3 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 36b6e4595e..049ab4c95d 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index c43e4c26e9..3f57927bff 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 6a3a87b6de..fa2fe186b3 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 36b6e4595e..049ab4c95d 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 8bab77fb0d..59022f9715 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index c43e4c26e9..3f57927bff 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 90c4c0d3fa..f10878bb29 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index cf9a0bc76f..61fe0c1212 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 2036859c03..e0f081a341 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 2036859c03..e0f081a341 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 25164b5253..d53e159cb8 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index f20d2bdf50..80085997cb 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 90c37ed952..8f3cf760c3 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1203,14 +1203,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 970dab9fea..7a87ef5186 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1210,14 +1210,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 1e63625332..1805501f7b 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 7dd34fb83e..6014b46c41 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1210,14 +1210,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 9e144055f5..ce402817a2 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 909b5fa16f..a1c6d4c2a2 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index fabca38d87..d5cc7a4dc2 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index 93bc5a8b8a..424dafcbe0 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index c08adad527..a072b4cde4 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index abf3c891ab..fe776dfa24 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index 7949afdb88..d08a4c1d08 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 6f15ee7f3e..0ff06d68a6 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 0881ed90ce..cc71c8aa08 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index b563b650d9..4db7c7f94c 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 9d0d2026fe..9684f4a829 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index b954cb3e41..738c41ec53 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index ea7d206489..3202f195cb 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index ef61b33761..57bb2f6560 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1206,14 +1206,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index c375fab566..cf5d39e911 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 8acb9fe211..8a73debd06 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index a18c13b67c..0a599e0406 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 3bf35b95ee..fa0bf5e9af 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 49a032c339..b342d65f3a 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 825610530a..3c2a3f28b9 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 839cc996d0..edbf3cce38 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 190fa95bcd..c056dc648f 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index d941c15513..8797abce81 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -1203,14 +1203,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index ad04eb8ab2..5b7bc13f82 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 102a4fdac6..466ca33bfb 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index bdd6446af6..85930ab52d 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index bdadb12a4f..ccf01e8d5e 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 0c84bd64e3..37a801b358 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 0cd774e85e..60648398b9 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index c43e4c26e9..3f57927bff 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 37271457ca..63ae2a8e5e 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 37271457ca..63ae2a8e5e 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 37271457ca..63ae2a8e5e 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 02248523cc..93cc6c8c30 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 8c1f00fbe5..43b09d9db9 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 917c1f0368..0c5aa8d677 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index e2a84d4582..e545783a75 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index ca91b0e679..796d61a6a4 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 06329a2d81..218316b602 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index bf50cfa894..1baf1934f5 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 72422b6d83..72a82b6aa0 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 4b81090bf2..cbdc59d80f 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 03a71a8cf7..d2126f1452 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2cb0860bc3..0f97138cbb 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index e10f19f619..a1182d178b 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index f668c6185d..a3de999974 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1206,14 +1206,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 648aa33a3c..3d6ce383f0 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1206,14 +1206,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 7318d3d2f8..95c8822c15 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -1206,14 +1206,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 7d80c3eac5..65579e4ae7 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index 97c208bd03..9da8af8d0a 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 306cc74c28..cb579be10c 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 2ba9253d1e..b7a6a921e1 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -1204,14 +1204,14 @@ #define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 30 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 30.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - #define SHAPING_MIN_FREQ 15 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + #define SHAPING_MIN_FREQ 15 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. #define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 550f218b3f..b88d408a1d 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index a2cf95c7e1..515df5b9c4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index e1421e27de..308a654026 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index f1c97ff8a8..034b84eeac 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index a34fced3b3..a75db22627 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 51de6244e7..e37d55f353 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 51de6244e7..e37d55f353 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 45f4396c71..9badb0736d 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index b4893927fd..145b245d3a 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 9c29e823d2..0c6c697a69 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 6c30f7d82f..89e6e88f14 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 330c4bb741..3f6186103f 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 5a6988f366..254b19fb4f 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 6f4c159993..ae9bbfc372 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 30d4166272..d14e8e041b 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index fed3259946..d6e85924f4 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index 2beb9b3b3b..9dea5bb774 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index cbe9fe3501..e616428e4f 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index cb8bd1c733..89c8c7f1c8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index cb8bd1c733..89c8c7f1c8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index cb8bd1c733..89c8c7f1c8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 4700381818..1816a0d382 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -1210,14 +1210,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 0824d3839a..6f1ec4c30c 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1210,14 +1210,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 896ea7615d..f3355560c4 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 2d812e0bf1..09069b9cff 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index a8d0a4eec2..b4ef89ea77 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 6ebec70956..92b785ca81 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index f474ae7ac7..2245ff7a44 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index e9759990e4..c0cdd99155 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 39a291d05d..3dc5c84c73 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 243d151b19..cfd44ccec4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -1202,14 +1202,14 @@ #define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. #define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 455b60a00c..b3b87ea9c9 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 32b986ce13..69ace94fea 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -1217,14 +1217,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 5a21159005..59d6e341ac 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1217,14 +1217,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index e879a40431..51852e52dd 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index e879a40431..51852e52dd 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index af92a19f84..64a6dd0414 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index ee49328b74..6b292e2de6 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 8bf7737c24..5220b06f32 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 1a8a35444b..6051752a89 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 1293b9b0d3..baf5d90093 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 3b37f64d07..c7059cee29 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 7cd13fb3ff..1fe1bae6e3 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 7cd13fb3ff..1fe1bae6e3 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 24a51c451c..6945cac2be 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index a99cd9e0f4..aff46aa05d 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 2070b11019..0beab36152 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 6f588c155c..66a703d51d 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index aa7374dda9..f60d0641da 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1205,14 +1205,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 90b7eda748..07a0a0e400 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 5db06aacc7..ae9f6c6309 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index f8dd6f580f..db39c24f59 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index f8dd6f580f..db39c24f59 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index e6a2e524dc..38c1274baf 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 7eaee77d8f..c0fec78f22 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 87ba47ffe3..064fb25de0 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 6832a96a52..edff86e725 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 6832a96a52..edff86e725 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 43bf4e03b1..f679b63dad 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index a8a084bb8b..43933a7124 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index a8a084bb8b..43933a7124 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index a8a084bb8b..43933a7124 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index a8a084bb8b..43933a7124 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index a5c78b5975..e11b365a6d 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 6a66906442..50897589a7 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 0a4e0e8630..7b5b045a9c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index d79f4afd07..d2db05d2ac 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index a8967a0c62..c762dff932 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 52784e996c..b7ffc1fc69 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 43bf4e03b1..f679b63dad 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3aae4e383f..24f3a4cad6 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index 12d0507201..cd84e220f6 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 6232497d0a..940356fc4c 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 23cf5cc76c..6a492f4b11 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 08be012bac..d1208b8d3c 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 510c77c6b3..71e64470ca 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 608b04469f..bdf43b3bcd 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index a335cb8192..f746337633 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1204,14 +1204,14 @@ //#define INPUT_SHAPING_Y #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. - #define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis. - #define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). + #define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. + //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif