Correct endstop noise comment

Fixes #99

config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h

@@ -826,7 +826,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -823,7 +823,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Dreammaker/Overlord/Configuration.h

@@ -777,7 +777,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h

@@ -789,7 +789,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/FLSUN/QQ-S/Configuration.h

@@ -777,7 +777,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -777,7 +777,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -777,7 +777,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -777,7 +777,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Geeetech/G2/Configuration.h

@@ -765,7 +765,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Geeetech/G2Pro/Configuration.h

@@ -765,7 +765,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Geeetech/G2S/Configuration.h

@@ -765,7 +765,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Geeetech/G2SPro/Configuration.h

@@ -765,7 +765,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -767,7 +767,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -782,7 +782,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/MKS/SBASE/Configuration.h

@@ -767,7 +767,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Malyan M300/Configuration.h

@@ -774,7 +774,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -771,7 +771,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/generic/Configuration.h

@@ -767,7 +767,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/kossel_clear/Configuration.h

@@ -766,7 +766,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/kossel_mini/Configuration.h

@@ -767,7 +767,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/kossel_pro/Configuration.h

@@ -753,7 +753,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *

config/examples/delta/kossel_xl/Configuration.h

@@ -771,7 +771,7 @@
  * Enable if your probe or endstops falsely trigger due to noise.
  *
  * - Higher values may affect repeatability or accuracy of some bed probes.
- * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  * - This feature is not required for common micro-switches mounted on PCBs
  *   based on the Makerbot design, which already have the 100nF capacitor.
  *