3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-09-09 00:17:44 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update Delta QQS-Pro (HiSpeedv1 Board) (#472)

Browse source
This commit is contained in:
Foxies 2021-04-24 08:58:06 +02:00 • committed by GitHub
parent 2b11b6d3cd
commit edc3040e5a
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
4 changed files with 113 additions and 120 deletions
Download patch file Download diff file Expand all files Collapse all files

135
config/examples/delta/FLSUN/QQS-Pro/Configuration.h
View file

@ -550,16 +550,10 @@
//#define MIN_BED_POWER 0 //#define MIN_BED_POWER 0
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4
// FLSUN QQS-Pro 1.6mm aluminium heater with 4mm lattice glass // FLSUN QQS-Pro 1.6mm aluminium heater with 4mm lattice glass
#define DEFAULT_bedKp 325.10 #define DEFAULT_bedKp 82.98
#define DEFAULT_bedKi 63.35 #define DEFAULT_bedKi 15.93
#define DEFAULT_bedKd 417.10 #define DEFAULT_bedKd 288.25
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED
@ -612,7 +606,7 @@
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature #define PID_FUNCTIONAL_RANGE 30 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#endif #endif
@ -654,8 +648,8 @@
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
//=========================================================================== //===========================================================================
//============================= Mechanical Settings ========================= //============================= Mechanical Settings =========================
@ -684,15 +678,15 @@
// Make delta curves from many straight lines (linear interpolation). // Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments) // This is a trade-off between visible corners (not enough segments)
// and processor overload (too many expensive sqrt calls). // and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200 #define DELTA_SEGMENTS_PER_SECOND 80
// After homing move down to a height where XY movement is unconstrained // After homing move down to a height where XY movement is unconstrained
#define DELTA_HOME_TO_SAFE_ZONE //#define DELTA_HOME_TO_SAFE_ZONE
// Delta calibration menu // Delta calibration menu
// uncomment to add three points calibration menu option. // uncomment to add three points calibration menu option.
// See http://minow.blogspot.com/index.html#4918805519571907051 // See http://minow.blogspot.com/index.html#4918805519571907051
//#define DELTA_CALIBRATION_MENU #define DELTA_CALIBRATION_MENU
// uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
#define DELTA_AUTO_CALIBRATION #define DELTA_AUTO_CALIBRATION
@ -701,7 +695,7 @@
#if ENABLED(DELTA_AUTO_CALIBRATION) #if ENABLED(DELTA_AUTO_CALIBRATION)
// set the default number of probe points : n*n (1 -> 7) // set the default number of probe points : n*n (1 -> 7)
#define DELTA_CALIBRATION_DEFAULT_POINTS 5 #define DELTA_CALIBRATION_DEFAULT_POINTS 4
#endif #endif
#if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
@ -713,10 +707,10 @@
#define DELTA_PRINTABLE_RADIUS 130.0 // (mm) #define DELTA_PRINTABLE_RADIUS 130.0 // (mm)
// Center-to-center distance of the holes in the diagonal push rods. // Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 280.0 // (mm) #define DELTA_DIAGONAL_ROD 280.00 // (mm)
// Distance between bed and nozzle Z home position // Distance between bed and nozzle Z home position
#define DELTA_HEIGHT 360.00 // (mm) Get this value from G33 auto calibrate #define DELTA_HEIGHT 370.00 // (mm) Get this value from G33 auto calibrate
#define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
@ -729,7 +723,7 @@
#define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
// Delta radius and diagonal rod adjustments (mm) // Delta radius and diagonal rod adjustments (mm)
#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 }
#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
#endif #endif
@ -875,14 +869,14 @@
// delta speeds must be the same on xyz // delta speeds must be the same on xyz
#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 397 } // default steps per unit #define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 396 } // default steps per unit
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2...]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 250, 250, 250, 200 } #define DEFAULT_MAX_FEEDRATE { 250, 250, 250, 210 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING) #if ENABLED(LIMITED_MAX_FR_EDITING)
@ -895,11 +889,11 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2...]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING) #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
#define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 3000, 20000 } // ...or, set your own edit limits
#endif #endif
/** /**
@ -910,9 +904,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 250 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)
@ -1097,7 +1091,6 @@
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
// Kossel Mini
#define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 }
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE
@ -1107,17 +1100,16 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 }
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 30
#define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE
// Move the nozzle down further to push the probe into retracted position.
#define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down
#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10
// Raise things back up slightly so we don't bump into anything
#define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) }
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_FEEDRATE)/2
#define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE
#define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 }
#define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE
#endif // Z_PROBE_ALLEN_KEY #endif // Z_PROBE_ALLEN_KEY
@ -1162,20 +1154,20 @@
* | [-] | * | [-] |
* O-- FRONT --+ * O-- FRONT --+
*/ */
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 20 #define PROBING_MARGIN 15
// X and Y axis travel speed (mm/min) between probes // X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (84*60) #define XY_PROBE_FEEDRATE (66*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST homing_feedrate_mm_m.z #define Z_PROBE_FEEDRATE_FAST (40*60)
// Feedrate (mm/min) for the "accurate" probe of each point // Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4)
/** /**
* Probe Activation Switch * Probe Activation Switch
@ -1214,7 +1206,7 @@
* A total of 3 or more adds more slow probes, taking the average. * A total of 3 or more adds more slow probes, taking the average.
*/ */
#define MULTIPLE_PROBING 2 #define MULTIPLE_PROBING 2
#define EXTRA_PROBING 1 //#define EXTRA_PROBING 1
/** /**
* Z probes require clearance when deploying, stowing, and moving between * Z probes require clearance when deploying, stowing, and moving between
@ -1230,16 +1222,16 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 50 // Z position after probing is done //#define Z_AFTER_PROBING 100 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -30 #define Z_PROBE_OFFSET_RANGE_MIN -25
#define Z_PROBE_OFFSET_RANGE_MAX 30 #define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy // Enable the M48 repeatability test to test probe accuracy
#define Z_MIN_PROBE_REPEATABILITY_TEST #define Z_MIN_PROBE_REPEATABILITY_TEST
@ -1264,13 +1256,13 @@
#endif #endif
//#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_FANS_OFF // Turn fans off when probing
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
// Require minimum nozzle and/or bed temperature for probing // Require minimum nozzle and/or bed temperature for probing
//#define PREHEAT_BEFORE_PROBING #define PREHEAT_BEFORE_PROBING
#if ENABLED(PREHEAT_BEFORE_PROBING) #if ENABLED(PREHEAT_BEFORE_PROBING)
#define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time //#define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
#define PROBING_BED_TEMP 50 #define PROBING_BED_TEMP 60
#endif #endif
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
@ -1348,7 +1340,7 @@
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS DELTA_PRINTABLE_RADIUS #define X_MAX_POS DELTA_PRINTABLE_RADIUS
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS DELTA_HEIGHT
/** /**
* Software Endstops * Software Endstops
@ -1376,7 +1368,7 @@
#endif #endif
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
#endif #endif
/** /**
@ -1444,7 +1436,7 @@
// After a runout is detected, continue printing this length of filament // After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of // before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
#define FILAMENT_RUNOUT_DISTANCE_MM 25 //#define FILAMENT_RUNOUT_DISTANCE_MM 25
#ifdef FILAMENT_RUNOUT_DISTANCE_MM #ifdef FILAMENT_RUNOUT_DISTANCE_MM
// Enable this option to use an encoder disc that toggles the runout pin // Enable this option to use an encoder disc that toggles the runout pin
@ -1557,7 +1549,7 @@
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
// Works best with 5 or more points in each dimension. // Works best with 5 or more points in each dimension.
#define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_X 9
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// Probe along the Y axis, advancing X after each column // Probe along the Y axis, advancing X after each column
@ -1589,8 +1581,8 @@
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
#define MESH_INSET 3 // Set Mesh bounds as an inset region of the bed #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed
#define GRID_MAX_POINTS_X 11 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_X 8 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
//#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points
@ -1696,7 +1688,7 @@
#endif #endif
// Delta only homes to Z // Delta only homes to Z
//#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (100*60) } #define HOMING_FEEDRATE_MM_M { (70*60), (70*60), (70*60) }
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
@ -1778,7 +1770,7 @@
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
#endif #endif
// //
@ -1787,8 +1779,8 @@
// When enabled Marlin will send a busy status message to the host // When enabled Marlin will send a busy status message to the host
// every couple of seconds when it can't accept commands. // every couple of seconds when it can't accept commands.
// //
//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
// //
@ -1807,7 +1799,7 @@
// Preheat Constants - Up to 5 are supported without changes // Preheat Constants - Up to 5 are supported without changes
// //
#define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_HOTEND 200
#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_BED 60
#define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_TEMP_CHAMBER 35
#define PREHEAT_1_FAN_SPEED 200 // Value from 0 to 255 #define PREHEAT_1_FAN_SPEED 200 // Value from 0 to 255
@ -1820,13 +1812,13 @@
#define PREHEAT_3_LABEL "PETG" #define PREHEAT_3_LABEL "PETG"
#define PREHEAT_3_TEMP_HOTEND 240 #define PREHEAT_3_TEMP_HOTEND 240
#define PREHEAT_3_TEMP_BED 60 #define PREHEAT_3_TEMP_BED 80
#define PREHEAT_3_TEMP_CHAMBER 35 #define PREHEAT_3_TEMP_CHAMBER 35
#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_4_LABEL "ABS" #define PREHEAT_4_LABEL "ABS"
#define PREHEAT_4_TEMP_HOTEND 250 #define PREHEAT_4_TEMP_HOTEND 250
#define PREHEAT_4_TEMP_BED 100 #define PREHEAT_4_TEMP_BED 90
#define PREHEAT_4_TEMP_CHAMBER 35 #define PREHEAT_4_TEMP_CHAMBER 35
#define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255
@ -1845,12 +1837,12 @@
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z_raise } // Specify a park position as { X, Y, Z_raise }
#define NOZZLE_PARK_POINT { 0, (Y_MAX_POS - 10), 100 } #define NOZZLE_PARK_POINT { 0, (Y_MAX_POS - 10), 50 }
//#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_X_ONLY // X move only is required to park
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #define NOZZLE_PARK_Z_FEEDRATE 100 // (mm/s) Z axis feedrate (not used for delta printers)
#endif #endif
/** /**
@ -2577,13 +2569,13 @@
// 320x240, 2.8", FSMC Display From MKS // 320x240, 2.8", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2 // Normally used in MKS Robin Nano V1.2
// //
#define MKS_ROBIN_TFT28 //#define MKS_ROBIN_TFT28
// //
// 320x240, 3.2", FSMC Display From MKS // 320x240, 3.2", FSMC Display From MKS
// Normally used in MKS Robin Nano V1.2 // Normally used in MKS Robin Nano V1.2
// //
//#define MKS_ROBIN_TFT32 #define MKS_ROBIN_TFT32
// //
// 480x320, 3.5", FSMC Display From MKS // 480x320, 3.5", FSMC Display From MKS
@ -2695,12 +2687,13 @@
#define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
#define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
//#define TOUCH_SCREEN_CALIBRATION #define TOUCH_SCREEN_CALIBRATION
//#define TOUCH_CALIBRATION_X 12316 // QQS-Pro use MKS Robin TFT v2.0
//#define TOUCH_CALIBRATION_Y -8981 #define TOUCH_CALIBRATION_X 12033
//#define TOUCH_OFFSET_X -43 #define TOUCH_CALIBRATION_Y -9047
//#define TOUCH_OFFSET_Y 257 #define TOUCH_OFFSET_X -30
#define TOUCH_OFFSET_Y 254
//#define TOUCH_ORIENTATION TOUCH_LANDSCAPE //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS)

82
config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h
View file

@ -239,7 +239,7 @@
*/ */
#if ENABLED(THERMAL_PROTECTION_HOTENDS) #if ENABLED(THERMAL_PROTECTION_HOTENDS)
#define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
@ -479,7 +479,7 @@
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -926,10 +926,10 @@
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME (2*60)
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_E true #define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
@ -941,6 +941,7 @@
// Slow down the machine if the lookahead buffer is (by default) half full. // Slow down the machine if the lookahead buffer is (by default) half full.
// Increase the slowdown divisor for larger buffer sizes. // Increase the slowdown divisor for larger buffer sizes.
// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second)
//#define SLOWDOWN //#define SLOWDOWN
#if ENABLED(SLOWDOWN) #if ENABLED(SLOWDOWN)
#define SLOWDOWN_DIVISOR 2 #define SLOWDOWN_DIVISOR 2
@ -1057,7 +1058,7 @@
* vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
* lowest stepping frequencies. * lowest stepping frequencies.
*/ */
#define ADAPTIVE_STEP_SMOOTHING //#define ADAPTIVE_STEP_SMOOTHING
/** /**
* Custom Microstepping * Custom Microstepping
@ -1133,7 +1134,7 @@
#if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60 #define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
#define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
#if IS_ULTIPANEL #if IS_ULTIPANEL
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -1159,14 +1160,14 @@
// Add Probe Z Offset calibration to the Z Probe Offsets menu // Add Probe Z Offset calibration to the Z Probe Offsets menu
#if HAS_BED_PROBE #if HAS_BED_PROBE
//#define PROBE_OFFSET_WIZARD #define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(PROBE_OFFSET_WIZARD)
// //
// Enable to init the Probe Z-Offset when starting the Wizard. // Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. // Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. // For example, with an offset of -5, consider a starting height of -4.
// //
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define PROBE_OFFSET_WIZARD_START_Z -15.2
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
@ -1223,7 +1224,7 @@
#if ENABLED(SHOW_BOOTSCREEN) #if ENABLED(SHOW_BOOTSCREEN)
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
#if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI)
#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
#endif #endif
#endif #endif
@ -1241,7 +1242,6 @@
#endif #endif
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI)
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
#define SHOW_REMAINING_TIME // Display estimated time to completion #define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME) #if ENABLED(SHOW_REMAINING_TIME)
#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
@ -1288,7 +1288,7 @@
#define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place
// Reverse SD sort to show "more recent" files first, according to the card's FAT. // Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
@ -1317,7 +1317,7 @@
*/ */
#define POWER_LOSS_RECOVERY #define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY) #if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
#define POWER_LOSS_PIN -1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. #define POWER_LOSS_PIN -1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
@ -1565,12 +1565,12 @@
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
//#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow
#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
#define STATUS_FAN_FRAMES 4 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_FAN_FRAMES 4 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
@ -1649,12 +1649,12 @@
// Specify additional languages for the UI. Default specified by LCD_LANGUAGE. // Specify additional languages for the UI. Default specified by LCD_LANGUAGE.
// //
#if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE) #if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE)
//#define LCD_LANGUAGE_2 fr #define LCD_LANGUAGE_2 fr
//#define LCD_LANGUAGE_3 de #define LCD_LANGUAGE_3 de
//#define LCD_LANGUAGE_4 es #define LCD_LANGUAGE_4 es
//#define LCD_LANGUAGE_5 it #define LCD_LANGUAGE_5 it
#ifdef LCD_LANGUAGE_2 #ifdef LCD_LANGUAGE_2
//#define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change #define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change
#endif #endif
#endif #endif
@ -1793,12 +1793,12 @@
#define BABYSTEPPING #define BABYSTEPPING
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_WITHOUT_HOMING
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
#define BABYSTEP_MULTIPLICATOR_Z 2 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
//#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
@ -1982,7 +1982,7 @@
// //
// G2/G3 Arc Support // G2/G3 Arc Support
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
//#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min
@ -2036,8 +2036,8 @@
* *
* Override the default value based on the driver type set in Configuration.h. * Override the default value based on the driver type set in Configuration.h.
*/ */
//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 //#define MINIMUM_STEPPER_POST_DIR_DELAY 200
//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 200
/** /**
* Minimum stepper driver pulse width (in µs) * Minimum stepper driver pulse width (in µs)
@ -2091,7 +2091,7 @@
// The ASCII buffer for serial input // The ASCII buffer for serial input
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 128 #define BUFSIZE 16
// Transmission to Host Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@ -2100,7 +2100,7 @@
// For debug-echo: 128 bytes for the optimal speed. // For debug-echo: 128 bytes for the optimal speed.
// Other output doesn't need to be that speedy. // Other output doesn't need to be that speedy.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 32 #define TX_BUFFER_SIZE 16
// Host Receive Buffer Size // Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
@ -2177,7 +2177,7 @@
#define SERIAL_OVERRUN_PROTECTION #define SERIAL_OVERRUN_PROTECTION
// For serial echo, the number of digits after the decimal point // For serial echo, the number of digits after the decimal point
#define SERIAL_FLOAT_PRECISION 4 //#define SERIAL_FLOAT_PRECISION 4
// @section extras // @section extras
@ -2313,10 +2313,10 @@
#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. #define PAUSE_PARK_RETRACT_LENGTH 3 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 30 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 850 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 850 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
@ -2324,9 +2324,9 @@
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 20 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 30 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 750 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 730 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -2492,7 +2492,7 @@
#define INTERPOLATE true #define INTERPOLATE true
#if AXIS_IS_TMC(X) #if AXIS_IS_TMC(X)
#define X_CURRENT 850 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 900 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 #define X_RSENSE 0.11
@ -2510,7 +2510,7 @@
#endif #endif
#if AXIS_IS_TMC(Y) #if AXIS_IS_TMC(Y)
#define Y_CURRENT 850 #define Y_CURRENT 900
#define Y_CURRENT_HOME Y_CURRENT #define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16 #define Y_MICROSTEPS 16
#define Y_RSENSE 0.11 #define Y_RSENSE 0.11
@ -2528,7 +2528,7 @@
#endif #endif
#if AXIS_IS_TMC(Z) #if AXIS_IS_TMC(Z)
#define Z_CURRENT 850 #define Z_CURRENT 900
#define Z_CURRENT_HOME Z_CURRENT #define Z_CURRENT_HOME Z_CURRENT
#define Z_MICROSTEPS 16 #define Z_MICROSTEPS 16
#define Z_RSENSE 0.11 #define Z_RSENSE 0.11
@ -2564,7 +2564,7 @@
#endif #endif
#if AXIS_IS_TMC(E0) #if AXIS_IS_TMC(E0)
#define E0_CURRENT 900 #define E0_CURRENT 850
#define E0_MICROSTEPS 16 #define E0_MICROSTEPS 16
#define E0_RSENSE 0.11 #define E0_RSENSE 0.11
#define E0_CHAIN_POS -1 #define E0_CHAIN_POS -1
@ -2762,7 +2762,7 @@
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
* M913 X/Y/Z/E to live tune the setting * M913 X/Y/Z/E to live tune the setting
*/ */
#define HYBRID_THRESHOLD //TMC #define HYBRID_THRESHOLD
#define X_HYBRID_THRESHOLD 150 // [mm/s] #define X_HYBRID_THRESHOLD 150 // [mm/s]
#define X2_HYBRID_THRESHOLD 100 #define X2_HYBRID_THRESHOLD 100
@ -2772,7 +2772,7 @@
#define Z2_HYBRID_THRESHOLD 3 #define Z2_HYBRID_THRESHOLD 3
#define Z3_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3
#define Z4_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3
#define E0_HYBRID_THRESHOLD 150 #define E0_HYBRID_THRESHOLD 50
#define E1_HYBRID_THRESHOLD 30 #define E1_HYBRID_THRESHOLD 30
#define E2_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30
#define E3_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30
@ -3405,7 +3405,7 @@
*/ */
#define EXTENDED_CAPABILITIES_REPORT #define EXTENDED_CAPABILITIES_REPORT
#if ENABLED(EXTENDED_CAPABILITIES_REPORT) #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
//#define M115_GEOMETRY_REPORT #define M115_GEOMETRY_REPORT
#endif #endif
/** /**