mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2026-01-30 21:00:42 -07:00
Examples Customizations
This commit is contained in:
GitHub Actions
parent
86bcdf9523
commit
eca0861c4e
820 changed files with 43726 additions and 42956 deletions
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "Simulator"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -37,6 +39,21 @@
|
|||
*/
|
||||
#define CONFIGURATION_H_VERSION 02010300
|
||||
|
||||
//
|
||||
// Simulator currently supports these displays. Choose one!
|
||||
//
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
//#define TFT_CLASSIC_UI
|
||||
//#define TFT_COLOR_UI
|
||||
//#define TFT_LVGL_UI
|
||||
|
||||
// Enable parent LCD based on your selection above
|
||||
#if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI, TFT_LVGL_UI)
|
||||
#define TFT_GENERIC
|
||||
#define TOUCH_SCREEN
|
||||
#endif
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
//===========================================================================
|
||||
|
|
@ -61,14 +78,14 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Original author or contributor.
|
||||
#define STRING_CONFIG_H_AUTHOR "(Chris Pepper)" // Original author or contributor.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_SIMULATED
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
|
@ -103,7 +120,7 @@
|
|||
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
|
||||
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
//#define SERIAL_PORT_2 3 // Raw TCP connection on localhost:8099
|
||||
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
|
||||
|
||||
/**
|
||||
|
|
@ -1491,6 +1508,7 @@
|
|||
* or (with LCD_BED_LEVELING) the LCD controller.
|
||||
*/
|
||||
//#define PROBE_MANUALLY
|
||||
//#define MANUAL_PROBE_START_Z 0.2
|
||||
|
||||
/**
|
||||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
|
|
@ -1518,7 +1536,7 @@
|
|||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#define BLTOUCH
|
||||
|
||||
/**
|
||||
* MagLev V4 probe by MDD
|
||||
|
|
@ -1707,7 +1725,7 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -20, 0, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point
|
||||
|
||||
// Enable and set to use a specific tool for probing. Disable to allow any tool.
|
||||
#define PROBING_TOOL 0
|
||||
|
|
@ -1948,8 +1966,8 @@
|
|||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 400
|
||||
#define Y_BED_SIZE 400
|
||||
|
||||
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
|
|
@ -1957,7 +1975,7 @@
|
|||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 500
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -2173,7 +2191,7 @@
|
|||
*/
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
|
|
@ -2262,7 +2280,7 @@
|
|||
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
|
|
@ -2278,7 +2296,7 @@
|
|||
// Subdivision of the grid by Catmull-Rom method.
|
||||
// Synthesizes intermediate points to produce a more detailed mesh.
|
||||
//
|
||||
//#define ABL_BILINEAR_SUBDIVISION
|
||||
#define ABL_BILINEAR_SUBDIVISION
|
||||
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
|
||||
// Number of subdivisions between probe points
|
||||
#define BILINEAR_SUBDIVISIONS 3
|
||||
|
|
@ -2415,7 +2433,7 @@
|
|||
* - Allows Z homing only when XY positions are known and trusted.
|
||||
* - If stepper drivers sleep, XY homing may be required again before Z homing.
|
||||
*/
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
|
||||
|
|
@ -2505,7 +2523,7 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
|
|
@ -2568,7 +2586,7 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
|
|
@ -2617,7 +2635,7 @@
|
|||
*
|
||||
* Caveats: The ending Z should be the same as starting Z.
|
||||
*/
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
#define NOZZLE_CLEAN_PATTERN_LINE // Provide 'G12 P0' - a simple linear cleaning pattern
|
||||
|
|
@ -2704,7 +2722,7 @@
|
|||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print.
|
||||
#endif
|
||||
|
|
@ -2730,7 +2748,7 @@
|
|||
* the firmware with the feature disabled, reset EEPROM, and (optionally)
|
||||
* re-flash the firmware again with this feature enabled.
|
||||
*/
|
||||
//#define PASSWORD_FEATURE
|
||||
#define PASSWORD_FEATURE
|
||||
#if ENABLED(PASSWORD_FEATURE)
|
||||
#define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
|
||||
#define PASSWORD_ON_STARTUP
|
||||
|
|
@ -2750,7 +2768,7 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
|
|
@ -2852,7 +2870,7 @@
|
|||
// If CLOCKWISE normally moves DOWN this makes it go UP.
|
||||
// If CLOCKWISE normally moves UP this makes it go DOWN.
|
||||
//
|
||||
//#define REVERSE_MENU_DIRECTION
|
||||
#define REVERSE_MENU_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for Select Screen.
|
||||
|
|
@ -3498,12 +3516,12 @@
|
|||
|
||||
// Interface. Enable one of the following options:
|
||||
//#define TFT_INTERFACE_FSMC
|
||||
//#define TFT_INTERFACE_SPI
|
||||
#define TFT_INTERFACE_SPI
|
||||
|
||||
// TFT Resolution. Enable one of the following options:
|
||||
//#define TFT_RES_320x240
|
||||
//#define TFT_RES_480x272
|
||||
//#define TFT_RES_480x320
|
||||
#define TFT_RES_480x320
|
||||
//#define TFT_RES_1024x600
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "Simulator"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -473,11 +475,6 @@
|
|||
#define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
|
||||
#endif
|
||||
#endif
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
// Specify up to one value per hotend here, according to your setup.
|
||||
// If there are fewer values, the last one applies to the remaining hotends.
|
||||
#define DEFAULT_KF_LIST { DEFAULT_KF, DEFAULT_KF }
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -949,7 +946,7 @@
|
|||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
//#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe).
|
||||
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
|
|
@ -1677,7 +1674,7 @@
|
|||
#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
|
||||
#endif
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
|
||||
#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
|
||||
#endif
|
||||
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE, HAS_MARLINUI_HD44780, HAS_GRAPHICAL_TFT)
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
|
|
@ -1846,8 +1843,8 @@
|
|||
* Long processes at the start of a G-code file can skew the Remaining Time estimate.
|
||||
* Enable these options to start this estimation at a later point in the G-code file.
|
||||
*/
|
||||
//#define REMAINING_TIME_PRIME // Provide G-code 'M75 R' to prime the Remaining Time estimate
|
||||
//#define REMAINING_TIME_AUTOPRIME // Prime the Remaining Time estimate later (e.g., at the end of 'M109')
|
||||
#define REMAINING_TIME_PRIME // Provide G-code 'M75 R' to prime the Remaining Time estimate
|
||||
#define REMAINING_TIME_AUTOPRIME // Prime the Remaining Time estimate later (e.g., at the end of 'M109')
|
||||
|
||||
/**
|
||||
* Continue after Power-Loss (Creality3D)
|
||||
|
|
@ -1915,21 +1912,17 @@
|
|||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_QUICK true // Use Quick Sort as a sorting algorithm. Otherwise use Bubble Sort.
|
||||
#define SDSORT_REVERSE false // Default to sorting file names in reverse order.
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_FOLDERS -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#if ENABLED(SDSORT_USES_RAM)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#if ENABLED(SDSORT_CACHE_NAMES)
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
|
||||
#endif
|
||||
#endif
|
||||
#define SDSORT_REVERSE false // Default to sorting file names in reverse order.
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_FOLDERS -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
|
||||
#define SDSORT_QUICK true // Use Quick Sort as a sorting algorithm. Otherwise use Bubble Sort.
|
||||
#endif
|
||||
|
||||
// Allow international symbols in long filenames. To display correctly, the
|
||||
|
|
@ -2088,7 +2081,7 @@
|
|||
|
||||
// A bigger font is available for edit items. Costs 3120 bytes of flash.
|
||||
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
|
||||
//#define USE_BIG_EDIT_FONT
|
||||
#define USE_BIG_EDIT_FONT
|
||||
|
||||
// A smaller font may be used on the Info Screen. Costs 2434 bytes of flash.
|
||||
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
|
||||
|
|
@ -2131,18 +2124,18 @@
|
|||
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
|
||||
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
|
||||
//#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
|
||||
// Only one STATUS_HEAT_* option can be enabled
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
//#define STATUS_HEAT_POWER // Show heater output power as a vertical bar
|
||||
|
||||
#endif // HAS_MARLINUI_U8GLIB
|
||||
|
||||
#if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
|
||||
#define MENU_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens
|
||||
//#define MENU_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens
|
||||
//#define OVERLAY_GFX_REVERSE // Swap the CW/CCW indicators in the graphics overlay
|
||||
|
||||
// Frivolous Game Options
|
||||
|
|
@ -2392,28 +2385,28 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
//#define BABYSTEP_INVERT_Z // Enable if Z babysteps should go the other way
|
||||
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle.
|
||||
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle.
|
||||
#if ENABLED(MOVE_Z_WHEN_IDLE)
|
||||
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
//#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping
|
||||
|
|
@ -2443,13 +2436,13 @@
|
|||
*
|
||||
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
|
||||
*/
|
||||
//#define LIN_ADVANCE
|
||||
#define LIN_ADVANCE
|
||||
|
||||
#if ANY(LIN_ADVANCE, FT_MOTION)
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
|
||||
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder. Override with 'M900 T<tool> K<mm>'.
|
||||
#else
|
||||
#define ADVANCE_K 0.22 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
|
||||
#define ADVANCE_K 0.0 // (mm) Compression length for all extruders. Override with 'M900 K<mm>'.
|
||||
#endif
|
||||
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with 'M900 L'.
|
||||
#endif
|
||||
|
|
@ -2645,7 +2638,7 @@
|
|||
//
|
||||
// G60/G61 Position Save and Return
|
||||
//
|
||||
//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
|
||||
#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
|
||||
|
||||
// @section motion
|
||||
|
||||
|
|
@ -2659,15 +2652,15 @@
|
|||
#define MIN_CIRCLE_SEGMENTS 72 // Minimum number of segments in a complete circle
|
||||
//#define ARC_SEGMENTS_PER_SEC 50 // Use the feedrate to choose the segment length
|
||||
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
|
||||
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
|
||||
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
|
||||
//#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure
|
||||
#endif
|
||||
|
||||
// G5 Bézier Curve Support with XYZE destination and IJPQ offsets
|
||||
//#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
|
||||
#if ANY(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
|
||||
//#define CNC_WORKSPACE_PLANES // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
|
||||
#define CNC_WORKSPACE_PLANES // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -2850,7 +2843,7 @@
|
|||
//#define NO_TIMEOUTS 1000 // (ms)
|
||||
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
|
|
@ -2904,7 +2897,7 @@
|
|||
*
|
||||
* Note that M207 / M208 / M209 settings are saved to EEPROM.
|
||||
*/
|
||||
//#define FWRETRACT
|
||||
#define FWRETRACT
|
||||
#if ENABLED(FWRETRACT)
|
||||
#define FWRETRACT_AUTORETRACT // Override slicer retractions
|
||||
#if ENABLED(FWRETRACT_AUTORETRACT)
|
||||
|
|
@ -3052,7 +3045,7 @@
|
|||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
|
|
@ -3092,10 +3085,10 @@
|
|||
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
|
||||
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
|
||||
#endif
|
||||
|
|
@ -3697,11 +3690,11 @@
|
|||
* Add the M240 G-code to take a photo.
|
||||
* The photo can be triggered by a digital pin or a physical movement.
|
||||
*/
|
||||
//#define PHOTO_GCODE
|
||||
#define PHOTO_GCODE
|
||||
#if ENABLED(PHOTO_GCODE)
|
||||
// A position to move to (and raise Z) before taking the photo
|
||||
//#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
|
||||
//#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
|
||||
#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
|
||||
#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
|
||||
//#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S)
|
||||
|
||||
// Canon RC-1 or homebrew digital camera trigger
|
||||
|
|
@ -4019,7 +4012,7 @@
|
|||
* Enables G53 and G54-G59.3 commands to select coordinate systems
|
||||
* and G92.1 to reset the workspace to native machine space.
|
||||
*/
|
||||
//#define CNC_COORDINATE_SYSTEMS
|
||||
#define CNC_COORDINATE_SYSTEMS
|
||||
|
||||
/**
|
||||
* CNC Drilling Cycle - UNDER DEVELOPMENT
|
||||
|
|
@ -4074,7 +4067,7 @@
|
|||
/**
|
||||
* Extra options for the M114 "Current Position" report
|
||||
*/
|
||||
//#define M114_DETAIL // Use 'M114 D' for details to check planner calculations
|
||||
#define M114_DETAIL // Use 'M114 D' for details to check planner calculations
|
||||
//#define M114_REALTIME // Real current position based on forward kinematics
|
||||
//#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
|
||||
|
||||
|
|
@ -4122,7 +4115,7 @@
|
|||
*/
|
||||
#define FASTER_GCODE_PARSER
|
||||
#if ENABLED(FASTER_GCODE_PARSER)
|
||||
//#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
|
||||
#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -4140,9 +4133,9 @@
|
|||
//#define MEATPACK_ON_SERIAL_PORT_1
|
||||
//#define MEATPACK_ON_SERIAL_PORT_2
|
||||
|
||||
//#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
|
||||
#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
|
||||
|
||||
//#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW
|
||||
|
||||
/**
|
||||
* Enable M111 debug flags 1=ECHO, 2=INFO, 4=ERRORS (unimplemented).
|
||||
|
|
@ -4168,13 +4161,13 @@
|
|||
* Note that G0 feedrates should be used with care for 3D printing (if used at all).
|
||||
* High feedrates may cause ringing and harm print quality.
|
||||
*/
|
||||
//#define PAREN_COMMENTS // Support for parentheses-delimited comments
|
||||
//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
|
||||
#define PAREN_COMMENTS // Support for parentheses-delimited comments
|
||||
#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
|
||||
|
||||
// Enable and set a (default) feedrate for all G0 moves
|
||||
//#define G0_FEEDRATE 3000 // (mm/min)
|
||||
#define G0_FEEDRATE 3000 // (mm/min)
|
||||
#ifdef G0_FEEDRATE
|
||||
//#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -4182,7 +4175,7 @@
|
|||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
#define STARTUP_COMMANDS "M118 Sim Startup!"
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
|
|
@ -4191,7 +4184,7 @@
|
|||
* and M820 to report the current set of macros.
|
||||
* Macros are not saved to EEPROM unless enabled below.
|
||||
*/
|
||||
//#define GCODE_MACROS
|
||||
#define GCODE_MACROS
|
||||
#if ENABLED(GCODE_MACROS)
|
||||
#define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
|
||||
#define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
|
||||
|
|
@ -4331,10 +4324,10 @@
|
|||
* Host Prompt Support enables Marlin to use the host for user prompts so
|
||||
* filament runout and other processes can be managed from the host side.
|
||||
*/
|
||||
//#define HOST_ACTION_COMMANDS
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
//#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
|
||||
//#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||
//#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
#endif
|
||||
|
|
@ -4349,7 +4342,7 @@
|
|||
*
|
||||
* Implement M486 to allow Marlin to skip objects
|
||||
*/
|
||||
//#define CANCEL_OBJECTS
|
||||
#define CANCEL_OBJECTS
|
||||
#if ENABLED(CANCEL_OBJECTS)
|
||||
#define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message
|
||||
#endif
|
||||
|
|
@ -4837,7 +4830,7 @@
|
|||
//
|
||||
// M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
|
||||
//
|
||||
//#define PINS_DEBUGGING
|
||||
#define PINS_DEBUGGING
|
||||
|
||||
//
|
||||
// M265 - I2C Scanner
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue