mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2026-01-31 21:30:44 -07:00
Examples Customizations
This commit is contained in:
GitHub Actions
parent
86bcdf9523
commit
eca0861c4e
820 changed files with 43726 additions and 42956 deletions
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "MakerBot/Replicator Single"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -61,14 +63,14 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Original author or contributor.
|
||||
#define STRING_CONFIG_H_AUTHOR "(RainMotorsports)" // Original author or contributor.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MIGHTYBOARD_REVE
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
|
@ -94,7 +96,7 @@
|
|||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
#define BAUDRATE 115200 // MakerBot Firmware 7.5.5
|
||||
|
||||
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
|
|
@ -135,7 +137,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "MakerBot Replicator"
|
||||
//#define CONFIGURABLE_MACHINE_NAME // Add G-code M550 to set/report the machine name
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
|
|
@ -396,7 +398,7 @@
|
|||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section multi-material
|
||||
|
|
@ -588,7 +590,7 @@
|
|||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_0 -2
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
|
|
@ -678,7 +680,7 @@
|
|||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
// (Use MINTEMP for thermistor short/failure protection.)
|
||||
#define HEATER_0_MAXTEMP 275
|
||||
#define HEATER_0_MAXTEMP 280 // MakerBot Firmware 7.5.5
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
|
|
@ -686,7 +688,7 @@
|
|||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 130 // Sailfish Firmware 7.8
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
|
||||
/**
|
||||
|
|
@ -732,9 +734,9 @@
|
|||
#define DEFAULT_KI_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_KD_LIST { 114.00, 114.00 }
|
||||
#else
|
||||
#define DEFAULT_KP 22.20
|
||||
#define DEFAULT_KI 1.08
|
||||
#define DEFAULT_KD 114.00
|
||||
#define DEFAULT_KP 36.67
|
||||
#define DEFAULT_KI 3.86
|
||||
#define DEFAULT_KD 87.11
|
||||
#endif
|
||||
#else
|
||||
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
|
||||
|
|
@ -823,7 +825,7 @@
|
|||
*
|
||||
* With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
|
||||
*/
|
||||
//#define PIDTEMPBED
|
||||
#define PIDTEMPBED
|
||||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//#define MIN_BED_POWER 0 // Min power to improve PID stability (0..MAX_BED_POWER).
|
||||
|
|
@ -832,9 +834,9 @@
|
|||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_BED_KP 10.00
|
||||
#define DEFAULT_BED_KI 0.023
|
||||
#define DEFAULT_BED_KD 305.4
|
||||
#define DEFAULT_BED_KP 51.04
|
||||
#define DEFAULT_BED_KI 6.92
|
||||
#define DEFAULT_BED_KD 250.85
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#else
|
||||
|
|
@ -932,7 +934,7 @@
|
|||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
|
@ -1278,10 +1280,10 @@
|
|||
* Set to the state (HIGH or LOW) that applies to each endstop.
|
||||
*/
|
||||
#define X_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define X_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define X_MAX_ENDSTOP_HIT_STATE LOW
|
||||
#define Y_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define Y_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define Z_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define Y_MAX_ENDSTOP_HIT_STATE LOW
|
||||
#define Z_MIN_ENDSTOP_HIT_STATE LOW
|
||||
#define Z_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
#define I_MIN_ENDSTOP_HIT_STATE HIGH
|
||||
#define I_MAX_ENDSTOP_HIT_STATE HIGH
|
||||
|
|
@ -1343,7 +1345,7 @@
|
|||
* Override with M92 (when enabled below)
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275202} // MakerBot Firmware 7.5.5
|
||||
|
||||
/**
|
||||
* Enable support for M92. Disable to save at least ~530 bytes of flash.
|
||||
|
|
@ -1355,7 +1357,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 19, 30 } // MakerBot Firmware 7.5.5
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -1368,7 +1370,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 150, 4000 } // MakerBot Firmware 7.5.5
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1383,9 +1385,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1395,7 +1397,7 @@
|
|||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
//#define CLASSIC_JERK
|
||||
#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
|
|
@ -1437,7 +1439,7 @@
|
|||
*
|
||||
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
|
||||
*/
|
||||
//#define S_CURVE_ACCELERATION
|
||||
#define S_CURVE_ACCELERATION
|
||||
#if ENABLED(S_CURVE_ACCELERATION)
|
||||
// Define to use 4th instead of 6th order motion curve
|
||||
//#define S_CURVE_FACTOR 0.25 // Initial and final acceleration factor, ideally 0.1 to 0.4.
|
||||
|
|
@ -1878,9 +1880,9 @@
|
|||
// @section stepper drivers
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
|
@ -1889,7 +1891,7 @@
|
|||
//#define INVERT_W_DIR false
|
||||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E0_DIR true
|
||||
#define INVERT_E1_DIR false
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
|
|
@ -1920,8 +1922,8 @@
|
|||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define X_HOME_DIR 1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
//#define I_HOME_DIR -1
|
||||
//#define J_HOME_DIR -1
|
||||
|
|
@ -1948,16 +1950,16 @@
|
|||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 227
|
||||
#define Y_BED_SIZE 148
|
||||
|
||||
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define X_MIN_POS -8
|
||||
#define Y_MIN_POS -2
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define X_MAX_POS 264
|
||||
#define Y_MAX_POS 152
|
||||
#define Z_MAX_POS 150
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -2357,13 +2359,13 @@
|
|||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
//#define LCD_BED_TRAMMING
|
||||
#define LCD_BED_TRAMMING
|
||||
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_INSET_LFRB { 60, 10, 60, 10 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
|
||||
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z raise between tramming points
|
||||
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
//#define BED_TRAMMING_USE_PROBE
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
#define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm)
|
||||
|
|
@ -2505,7 +2507,7 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
|
|
@ -2544,8 +2546,8 @@
|
|||
// Preheat Constants - Up to 10 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_HOTEND 200
|
||||
#define PREHEAT_1_TEMP_BED 60
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
|
|
@ -2568,11 +2570,11 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 20 }
|
||||
#define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
|
|
@ -2750,7 +2752,7 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
|
|
@ -2852,7 +2854,7 @@
|
|||
// If CLOCKWISE normally moves DOWN this makes it go UP.
|
||||
// If CLOCKWISE normally moves UP this makes it go DOWN.
|
||||
//
|
||||
//#define REVERSE_MENU_DIRECTION
|
||||
#define REVERSE_MENU_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for Select Screen.
|
||||
|
|
@ -2877,7 +2879,7 @@
|
|||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
//#define INDIVIDUAL_AXIS_HOMING_SUBMENU
|
||||
|
||||
//
|
||||
|
|
@ -3054,7 +3056,7 @@
|
|||
// https://github.com/mikeshub/SailfishLCD
|
||||
// Uses the code directly from Sailfish
|
||||
//
|
||||
//#define FF_INTERFACEBOARD
|
||||
#define FF_INTERFACEBOARD
|
||||
|
||||
//
|
||||
// TFT GLCD Panel with Marlin UI
|
||||
|
|
@ -3677,7 +3679,7 @@
|
|||
//#define PCA9632
|
||||
|
||||
// Support for PCA9533 PWM LED driver
|
||||
//#define PCA9533
|
||||
#define PCA9533
|
||||
|
||||
/**
|
||||
* RGB LED / LED Strip Control
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "MakerBot/Replicator Single"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -473,11 +475,6 @@
|
|||
#define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
|
||||
#endif
|
||||
#endif
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
// Specify up to one value per hotend here, according to your setup.
|
||||
// If there are fewer values, the last one applies to the remaining hotends.
|
||||
#define DEFAULT_KF_LIST { DEFAULT_KF, DEFAULT_KF }
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -493,7 +490,7 @@
|
|||
* Enable Autotemp Mode with M104/M109 F<factor> S<mintemp> B<maxtemp>.
|
||||
* Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL).
|
||||
*/
|
||||
#define AUTOTEMP
|
||||
//#define AUTOTEMP
|
||||
#if ENABLED(AUTOTEMP)
|
||||
#define AUTOTEMP_OLDWEIGHT 0.98 // Factor used to weight previous readings (0.0 < value < 1.0)
|
||||
#define AUTOTEMP_MIN 210
|
||||
|
|
@ -561,7 +558,7 @@
|
|||
* Hotend Idle Timeout
|
||||
* Prevent filament in the nozzle from charring and causing a critical jam.
|
||||
*/
|
||||
//#define HOTEND_IDLE_TIMEOUT
|
||||
#define HOTEND_IDLE_TIMEOUT
|
||||
#if ENABLED(HOTEND_IDLE_TIMEOUT)
|
||||
#define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
|
||||
#define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
|
||||
|
|
@ -699,7 +696,7 @@
|
|||
* Multiple extruders can be assigned to the same pin in which case
|
||||
* the fan will turn on when any selected extruder is above the threshold.
|
||||
*/
|
||||
#define E0_AUTO_FAN_PIN -1
|
||||
//#define E0_AUTO_FAN_PIN -1
|
||||
#define E1_AUTO_FAN_PIN -1
|
||||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
|
|
@ -1514,14 +1511,14 @@
|
|||
/**
|
||||
* I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
|
||||
*/
|
||||
//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster
|
||||
#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster
|
||||
//#define DIGIPOT_MCP4451
|
||||
#if ANY(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5
|
||||
#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5
|
||||
|
||||
// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
|
||||
// These correspond to the physical drivers, so be mindful if the order is changed.
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
|
||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 0.81, 0.81, 0.28, 0.81, 0.81 } // MakerBot Mightyboard
|
||||
|
||||
//#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
|
||||
|
||||
|
|
@ -1812,7 +1809,7 @@
|
|||
//#define SD_DETECT_STATE HIGH
|
||||
|
||||
//#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up
|
||||
//#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
|
||||
#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
|
||||
|
||||
//#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping
|
||||
|
||||
|
|
@ -1827,7 +1824,7 @@
|
|||
|
||||
#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
|
||||
|
||||
//#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM
|
||||
#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM
|
||||
//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
|
||||
|
||||
//#define ONE_CLICK_PRINT // Prompt to print the newest file on inserted media
|
||||
|
|
@ -1915,21 +1912,17 @@
|
|||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_QUICK true // Use Quick Sort as a sorting algorithm. Otherwise use Bubble Sort.
|
||||
#define SDSORT_REVERSE false // Default to sorting file names in reverse order.
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_FOLDERS -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#if ENABLED(SDSORT_USES_RAM)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#if ENABLED(SDSORT_CACHE_NAMES)
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
|
||||
#endif
|
||||
#endif
|
||||
#define SDSORT_REVERSE false // Default to sorting file names in reverse order.
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_FOLDERS -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
|
||||
#define SDSORT_QUICK true // Use Quick Sort as a sorting algorithm. Otherwise use Bubble Sort.
|
||||
#endif
|
||||
|
||||
// Allow international symbols in long filenames. To display correctly, the
|
||||
|
|
@ -2392,7 +2385,7 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
|
|
@ -2403,7 +2396,7 @@
|
|||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
|
|
@ -2413,15 +2406,11 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
//#define BABYSTEP_GLOBAL_Z // Combine M424 Z and Babystepping
|
||||
|
||||
#if ANY(BABYSTEP_ZPROBE_OFFSET, BABYSTEP_GLOBAL_Z)
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
#endif
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -2652,7 +2641,7 @@
|
|||
//
|
||||
// G2/G3 Arc Support
|
||||
//
|
||||
#define ARC_SUPPORT // Requires ~3226 bytes
|
||||
//#define ARC_SUPPORT // Requires ~3226 bytes
|
||||
#if ENABLED(ARC_SUPPORT)
|
||||
#define MIN_ARC_SEGMENT_MM 0.1 // (mm) Minimum length of each arc segment
|
||||
#define MAX_ARC_SEGMENT_MM 1.0 // (mm) Maximum length of each arc segment
|
||||
|
|
@ -3052,19 +3041,19 @@
|
|||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
|
|
@ -3095,7 +3084,7 @@
|
|||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
|
||||
#endif
|
||||
|
|
@ -4021,14 +4010,6 @@
|
|||
*/
|
||||
//#define CNC_COORDINATE_SYSTEMS
|
||||
|
||||
/**
|
||||
* CNC Drilling Cycle - UNDER DEVELOPMENT
|
||||
*
|
||||
* Enables G81 to perform a drilling cycle.
|
||||
* Currently only supports a single cycle, no G-code chaining.
|
||||
*/
|
||||
//#define CNC_DRILLING_CYCLE
|
||||
|
||||
// @section security
|
||||
|
||||
/**
|
||||
|
|
@ -4043,7 +4024,7 @@
|
|||
/**
|
||||
* Disable all Volumetric extrusion options
|
||||
*/
|
||||
//#define NO_VOLUMETRICS
|
||||
#define NO_VOLUMETRICS
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS)
|
||||
/**
|
||||
|
|
@ -4125,15 +4106,6 @@
|
|||
//#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Variables
|
||||
*
|
||||
* Define a variable from 100-115 with G-code like '#101=19.6'.
|
||||
* A variable can then be used in a G-code expression like 'G0 X[#101+3]'.
|
||||
* See https://gcodetutor.com/cnc-macro-programming/cnc-variables.html
|
||||
*/
|
||||
//#define GCODE_VARIABLES
|
||||
|
||||
/**
|
||||
* Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
|
||||
*/
|
||||
|
|
@ -4155,7 +4127,7 @@
|
|||
* workspace offsets to slightly optimize performance.
|
||||
* G92 will revert to its behavior from Marlin 1.0.
|
||||
*/
|
||||
//#define NO_WORKSPACE_OFFSETS
|
||||
#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
/**
|
||||
* Disable M206 and M428 if you don't need home offsets.
|
||||
|
|
@ -4182,7 +4154,7 @@
|
|||
*
|
||||
* Execute certain G-code commands immediately after power-on.
|
||||
*/
|
||||
//#define STARTUP_COMMANDS "M17 Z"
|
||||
#define STARTUP_COMMANDS "M150 RUB255" // Set LED's to white at startup.
|
||||
|
||||
/**
|
||||
* G-code Macros
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue