diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 7f33e3b3d0..ca2e02c736 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 90f2de81ff..0620f9dfe6 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 167ee0d166..2bee59abd4 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 158c73cb14..718fc6c818 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 63bcd12583..783cdb80f4 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 382e4c7add..973d4a7813 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1398,13 +1398,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 11e344e33c..0355b24e31 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 6047fea2e6..3e9101b934 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index c31bf939e0..d86a787c50 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index c31bf939e0..d86a787c50 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 9758341b1e..3ef2d4c0d8 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index adf14f1b7f..b971d04f7d 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index ac48abb843..1585bf8ee6 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 616865e7a0..b059bf5c08 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index c6ea7ed5db..5bd491597c 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index a055d63d36..b421b065b5 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 2aa48d7cb6..b90be190bc 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 49db9276a5..4f0459a377 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 49db9276a5..4f0459a377 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index c7ab4b8e48..9853f7055b 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index c7ab4b8e48..9853f7055b 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 312d15fae7..7e4f3869a8 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 312d15fae7..7e4f3869a8 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 312d15fae7..7e4f3869a8 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 427fe6d889..23b4dbc38e 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index d678f3d9e9..1d1e230b67 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index bdd81caf0e..f502d6cee9 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index b77df68cff..8aa2788ad7 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 27189361a1..fc4663aaa8 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 7d7a59fd5a..8603086a74 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1392,13 +1392,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index bf11aedb6f..a9a209ba87 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index bf11aedb6f..a9a209ba87 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 6d91caf8bb..a23b83d3d3 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 7f33e3b3d0..ca2e02c736 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 9d74921dc5..5e219e0462 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 86fa36750e..ef07047176 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index d2158e4e10..04dac57d54 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 87ea50f93d..fa583958c0 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 9a020d89b1..dcd1d89733 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 605e74ad71..34aea65441 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1396,13 +1396,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 9a020d89b1..dcd1d89733 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 60a16ffd65..566e5fc9ce 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 97ba7c6629..1b103f745f 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 50c9a1eacc..4eca52e2c1 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index bebdf40f80..79b282e568 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index bebdf40f80..79b282e568 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 96f694ab45..35f2160cac 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6a81778aaa..84e7370740 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 20afb99ba5..f88c489a97 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 1379b259a3..2ebf973579 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3ee4fd50c7..32a00a4cfc 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 0a666ae643..b17953f01a 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 966e609a1a..4c767bcb2f 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 155c533ecf..1115ef5593 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 6bef8873d5..88097a4cd6 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1389,13 +1389,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 6856ae6c28..fcec958a99 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index e4eb093750..7cbcc62259 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 570bbc4690..ca102c18f9 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index fb2fa904d9..79a6bd2d87 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a9c03fe618..d2721d901d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 0f35adf67d..551f8b7d29 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index d9390ee474..d7d2958ede 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1389,13 +1389,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 8ddf8229d0..a5835fc938 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 661f7a4966..eff5a0df96 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -1389,13 +1389,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 4ec8ae5cbb..ed41b17908 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index ca7210466c..9b0d7a7cb7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 4ec8ae5cbb..ed41b17908 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 293ee08080..981b72c4c5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index da832161d7..898287cae2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 077f71e07b..51fa864a23 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a18d5c9e1b..c5414b53be 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 164029fcfa..aa9ea2cf17 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 164029fcfa..aa9ea2cf17 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index e945222c6a..041a7efe06 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 89093ec44e..f6ac0f5ab8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 89093ec44e..f6ac0f5ab8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 89093ec44e..f6ac0f5ab8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 89093ec44e..f6ac0f5ab8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index f605132b97..12deeaee79 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 261df34e4a..8674a5d45c 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index aea921f035..6ef58b8b19 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 513ab132f2..6d9a2574d8 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index fa671c4fb3..5ad6fc0aa4 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index db537ed45f..c016d9bac0 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 4bb6ed52da..1a81f660a1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ebe5c7ff69..8b945c50ae 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 7addebdf43..3c3bd5b635 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 9cea12fd24..f694407b53 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 7addebdf43..3c3bd5b635 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 6456ce8773..e65f4b09fc 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1392,13 +1392,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index db537ed45f..c016d9bac0 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 4bb6ed52da..1a81f660a1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 7a84e059d3..e5dab598d7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4d27251c3d..aec2f85de4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION ONBOARD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 17b82aed48..685c7ebbdb 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 17b82aed48..685c7ebbdb 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 890e3ff020..266cd0795f 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 67ac0c1248..bc7b5ad874 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index f42db32417..454e07c53e 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 8761c78b4e..653011412f 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 316e17dcdd..f624f599e7 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 24c1f678b1..1966b13fcb 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 79d23fb410..9c7e38b857 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index f7937433a9..8679b7b09c 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 73468a6e41..ad79ee7bba 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 73468a6e41..ad79ee7bba 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index da6711f712..88bd1cab19 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index fea08bed39..79e344ff6b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1387,13 +1387,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 67e4577ceb..061fec7227 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1391,13 +1391,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 2aaddcc483..7963b4a83d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 196c4391f3..6f4352a3bd 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 1664eabdc6..dd90376304 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 0899b51069..e628200731 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1392,13 +1392,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 0f14168e2d..8e60ff10b5 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index e4837bb4f0..286394f0d9 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 0ad48035cd..8b568297c8 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 0ad48035cd..8b568297c8 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index dfda823b24..6ad5328a0f 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index dfda823b24..6ad5328a0f 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index dfda823b24..6ad5328a0f 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 5ddd48914b..c8406fcc45 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 3f15728653..c2c2f8c98e 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index f7937433a9..8679b7b09c 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 5ddd48914b..c8406fcc45 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 3f15728653..c2c2f8c98e 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 9ccce5a6e6..e4b15fc68e 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index f7937433a9..8679b7b09c 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index a87a6936ff..fc0a772b15 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 3dca363012..f8d0b0cee1 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 0f14168e2d..8e60ff10b5 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 0f14168e2d..8e60ff10b5 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index b4494ca5f9..7d4c26934d 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1379,13 +1379,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 8873c743b1..4dccb1b451 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index bf87686cac..45fbbd09ef 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index bebc7658cd..847b8ee1a9 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1393,13 +1393,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index afd921ecf9..b8916387fa 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index bebc7658cd..847b8ee1a9 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1393,13 +1393,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index a95e13ca69..94dc7bad6c 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index b1780f865f..7a129612b1 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 49db9276a5..4f0459a377 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 0b0e3dbb60..fbb24b8e12 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index a996f14658..caa09994b7 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 60e3b83d86..35eb1456c1 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 92706ee67b..4f3c1845a4 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index f633153f91..541b87577a 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index c5f32bba54..1d5619d805 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 7f33e3b3d0..ca2e02c736 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index da659bec3b..1feaf59da2 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 3bf5b6abb5..303145a7e1 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 4c61aeb713..a7acd96afc 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 419bc11ec2..37f3c9099f 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ #define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index cad9d0984f..76b8e017bc 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 9758341b1e..3ef2d4c0d8 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 1ef643fa2b..921fa802be 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index c736357893..ca72bd5c2c 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index c736357893..ca72bd5c2c 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index c736357893..ca72bd5c2c 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 589d191f82..aec73f0ab9 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 7d16da026a..6b13abfbec 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1385,13 +1385,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 20c229670a..77a8a5f5ee 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1385,13 +1385,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index ea2fa24f6f..433b027fa3 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index db4ee9d6b8..1bc1809474 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 538df0e68d..e82103429c 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 43392a502b..8fd02e11bb 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 1c54eed936..1b254d42a0 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index f331e32fd1..e5026303dd 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 96373bf3e1..d8db13531c 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 96373bf3e1..d8db13531c 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 000d019cda..86a20fec4f 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index a9cf5b9c20..6841be8ca7 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index f232a1a028..bd95cf1b72 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index f5f9214ee9..56d306c061 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 286226602f..5aecec7343 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 31044585d3..f493f5a5bb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 31044585d3..f493f5a5bb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 31044585d3..f493f5a5bb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 96c022561d..101cd513c2 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1394,13 +1394,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 9457c173d0..f6dcb2d340 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index d92982341c..05f8d31e88 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c518a1fe5d..a52fd06a82 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 6020d7116a..3c11b610e9 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 7099660bce..20a731d5ad 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1401,13 +1401,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 367633d793..08be6323a9 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 367633d793..08be6323a9 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index b701f84324..3be37334d2 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 9352e796e0..132f298c95 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 6c6c2a754e..2d6c5640a4 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 4a5718b5c7..669a11f8e1 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index b6b33db952..8d81272423 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index ad70a354a1..6d902d9139 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 78ad716177..ed06280999 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 36478c3833..74c75194e4 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1383,13 +1383,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/adafruit/ST7565/Configuration_adv.h b/config/examples/adafruit/ST7565/Configuration_adv.h index 7f33e3b3d0..ca2e02c736 100644 --- a/config/examples/adafruit/ST7565/Configuration_adv.h +++ b/config/examples/adafruit/ST7565/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 7b703ae3da..4c8f9009e6 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1391,13 +1391,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 777444d9b0..3c5e8027e4 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 7fe5fb40f8..e617967dbc 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1391,13 +1391,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index e3f826feb9..0cfcee36b2 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 07f346cf87..442285f2ba 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index b3ea548a90..f8f0008423 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 1e417d4331..8aa7f91525 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1391,13 +1391,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index b53c48a15f..4946f562fd 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index b53c48a15f..4946f562fd 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 3a9131384c..dd2ce4b258 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 75b244763b..a4b404a813 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 802f462efb..645087c932 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 802f462efb..645087c932 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 802f462efb..645087c932 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index e3879451a9..35c9730792 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 5cee7eaabc..1eb074728c 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index db4f2e1477..80ae76fb3d 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 0e39dd0599..77bee59be0 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 970ef362e5..4e4f2ef3dc 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 3a9131384c..dd2ce4b258 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 57b68d3b1e..796c6c00aa 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 338f4fac85..cead6e87e9 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1390,13 +1390,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index e11df144b9..e4f6e8edaf 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 4596a66215..b0556fb2fc 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /** diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index e1b226a7a2..ea429af4bb 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1388,13 +1388,16 @@ * Set this option to one of the following (or the board's defaults apply): * * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) + * ONBOARD - Use the SD drive on the control board. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ //#define SDCARD_CONNECTION LCD + // Enable if SD detect is rendered useless (e.g., by using an SD extender) + //#define NO_SD_DETECT + #endif // SDSUPPORT /**