3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-09 07:56:27 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ ADVANCE_K per-extruder

Browse source 
MarlinFirmware/Marlin#24821
This commit is contained in:
Scott Lahteine 2022-10-09 12:04:09 -04:00
parent c802c9d810
commit e3281f067d
292 changed files with 2920 additions and 1752 deletions
Download patch file Download diff file Expand all files Collapse all files

16
config/default/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -2084,12 +2084,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A6/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A8/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/A9/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/E10/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.05 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.05 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.8 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.8 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.8 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/ArmEd/Configuration_adv.h
View file

@ -2079,12 +2079,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.2 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.20 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.20 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIQU/B1 - SKR 2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -2082,12 +2082,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/CTC/A13/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Cartesio/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -2057,12 +2057,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -2078,12 +2078,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -2080,12 +2080,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-20/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.56 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.56 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.56 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h
View file

@ -2070,12 +2070,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h
View file

@ -2075,12 +2075,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
//#define LIN_ADVANCE //#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
//#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

16
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2074,12 +2074,16 @@
*/ */
#define LIN_ADVANCE #define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #if ENABLED(DISTINCT_E_FACTORS)
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed #define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #else
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. #define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. #endif
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz. //#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif #endif
// @section leveling // @section leveling

Some files were not shown because too many files have changed in this diff Show more