mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-10 15:25:21 -06:00
🚸 BIQU B1 SE Plus followup (#613)
This commit is contained in:
Keith Bennett
GitHub
parent
04547bf57b
commit
e0a8b515a7
2 changed files with 127 additions and 126 deletions
|
|
@ -69,7 +69,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(BIQU, B1-SE)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, BIQU B1 SE Plus)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -143,7 +143,7 @@
|
|||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "B1 SE Plus"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -563,7 +563,7 @@
|
|||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 120
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
|
||||
/**
|
||||
|
|
@ -588,21 +588,21 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
// Specify up to one value per hotend here, according to your setup.
|
||||
// If there are fewer values, the last one applies to the remaining hotends.
|
||||
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
||||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||
#define DEFAULT_Kp_LIST { 23.34, 23.34 }
|
||||
#define DEFAULT_Ki_LIST { 1.85, 1.85 }
|
||||
#define DEFAULT_Kd_LIST { 73.55, 73.55 }
|
||||
#else
|
||||
#define DEFAULT_Kp 22.20
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114.00
|
||||
#define DEFAULT_Kp 28.31
|
||||
#define DEFAULT_Ki 2.49
|
||||
#define DEFAULT_Kd 80.40
|
||||
#endif
|
||||
#endif // PIDTEMP
|
||||
|
||||
|
|
@ -639,16 +639,9 @@
|
|||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
// B1 SE Plus 300*300mm bed
|
||||
#define DEFAULT_bedKp 151.78
|
||||
#define DEFAULT_bedKi 28.45
|
||||
#define DEFAULT_bedKd 539.89
|
||||
// // B1 SE 230*230mm bed
|
||||
// #define DEFAULT_bedKp 41.78
|
||||
// #define DEFAULT_bedKi 7.32
|
||||
// #define DEFAULT_bedKd 158.93
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#endif // PIDTEMPBED
|
||||
|
|
@ -722,7 +715,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 1000
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -865,9 +858,9 @@
|
|||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
#define X_DRIVER_TYPE TMC2208
|
||||
#define Y_DRIVER_TYPE TMC2208
|
||||
#define Z_DRIVER_TYPE TMC2208
|
||||
#define X_DRIVER_TYPE TMC2208 // TMC2225
|
||||
#define Y_DRIVER_TYPE TMC2208 // TMC2225
|
||||
#define Z_DRIVER_TYPE TMC2208 // TMC2225
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
//#define Z2_DRIVER_TYPE A4988
|
||||
|
|
@ -876,7 +869,7 @@
|
|||
//#define I_DRIVER_TYPE A4988
|
||||
//#define J_DRIVER_TYPE A4988
|
||||
//#define K_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE TMC2208
|
||||
#define E0_DRIVER_TYPE TMC2208 // TMC2225
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
|
|
@ -901,7 +894,7 @@
|
|||
*
|
||||
* :[2,3,4,5,6,7]
|
||||
*/
|
||||
//#define ENDSTOP_NOISE_THRESHOLD 2
|
||||
#define ENDSTOP_NOISE_THRESHOLD 4
|
||||
|
||||
// Check for stuck or disconnected endstops during homing moves.
|
||||
//#define DETECT_BROKEN_ENDSTOP
|
||||
|
|
@ -938,7 +931,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 10, 65 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 150, 150, 5, 65 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -1005,7 +998,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -1080,7 +1073,7 @@
|
|||
* Use the nozzle as the probe, as with a conductive
|
||||
* nozzle system or a piezo-electric smart effector.
|
||||
*/
|
||||
//#define NOZZLE_AS_PROBE
|
||||
#define NOZZLE_AS_PROBE
|
||||
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
|
|
@ -1183,11 +1176,11 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define PROBING_MARGIN 12
|
||||
#define PROBING_MARGIN 10
|
||||
|
||||
// X and Y axis travel speed (mm/min) between probes
|
||||
#define XY_PROBE_FEEDRATE (133*60)
|
||||
|
|
@ -1268,8 +1261,8 @@
|
|||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -10
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 10
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
|
@ -1365,7 +1358,7 @@
|
|||
*/
|
||||
//#define Z_IDLE_HEIGHT Z_HOME_POS
|
||||
|
||||
#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
|
||||
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
|
|
@ -1386,11 +1379,11 @@
|
|||
#define Y_BED_SIZE 310
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define X_MIN_POS -2
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE + 5
|
||||
#define Z_MAX_POS 340
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
|
|
@ -1452,7 +1445,7 @@
|
|||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
|
||||
|
|
@ -1558,13 +1551,13 @@
|
|||
* these options to restore the prior leveling state or to always enable
|
||||
* leveling immediately after G28.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
#define ENABLE_LEVELING_AFTER_G28
|
||||
#define RESTORE_LEVELING_AFTER_G28
|
||||
//#define ENABLE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
* Auto-leveling needs preheating
|
||||
*/
|
||||
#define PREHEAT_BEFORE_LEVELING
|
||||
//#define PREHEAT_BEFORE_LEVELING
|
||||
#if ENABLED(PREHEAT_BEFORE_LEVELING)
|
||||
#define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
|
||||
#define LEVELING_BED_TEMP 50
|
||||
|
|
@ -1588,7 +1581,7 @@
|
|||
// The height can be set with M420 Z<height>
|
||||
#define ENABLE_LEVELING_FADE_HEIGHT
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
#define DEFAULT_LEVELING_FADE_HEIGHT 0.0 // (mm) Default fade height.
|
||||
#define DEFAULT_LEVELING_FADE_HEIGHT 30.0 // (mm) Default fade height.
|
||||
#endif
|
||||
|
||||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
|
|
@ -1600,7 +1593,7 @@
|
|||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
*/
|
||||
#define G26_MESH_VALIDATION
|
||||
//#define G26_MESH_VALIDATION
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
|
||||
|
|
@ -1616,7 +1609,7 @@
|
|||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 6
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
|
|
@ -1626,7 +1619,7 @@
|
|||
|
||||
// Beyond the probed grid, continue the implied tilt?
|
||||
// Default is to maintain the height of the nearest edge.
|
||||
//#define EXTRAPOLATE_BEYOND_GRID
|
||||
#define EXTRAPOLATE_BEYOND_GRID
|
||||
|
||||
//
|
||||
// Experimental Subdivision of the grid by Catmull-Rom method.
|
||||
|
|
@ -1689,10 +1682,10 @@
|
|||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
#define LEVEL_BED_CORNERS
|
||||
//#define LEVEL_BED_CORNERS
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#define LEVEL_CORNERS_INSET_LFRB { 15, 15, 15, 15 } // (mm) Left, Front, Right, Back insets
|
||||
#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
|
|
@ -1758,7 +1751,7 @@
|
|||
#endif
|
||||
|
||||
// Homing speeds (mm/min)
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) }
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
|
||||
|
||||
// Validate that endstops are triggered on homing moves
|
||||
#define VALIDATE_HOMING_ENDSTOPS
|
||||
|
|
@ -1869,16 +1862,22 @@
|
|||
// Preheat Constants - Up to 5 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 195
|
||||
#define PREHEAT_1_TEMP_BED 55
|
||||
#define PREHEAT_1_TEMP_HOTEND 190
|
||||
#define PREHEAT_1_TEMP_BED 65
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_LABEL "PETG"
|
||||
#define PREHEAT_2_TEMP_HOTEND 235
|
||||
#define PREHEAT_2_TEMP_BED 80
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_3_LABEL "ABS"
|
||||
#define PREHEAT_3_TEMP_HOTEND 240
|
||||
#define PREHEAT_3_TEMP_BED 110
|
||||
#define PREHEAT_3_TEMP_CHAMBER 35
|
||||
#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
|
|
@ -1895,7 +1894,7 @@
|
|||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 }
|
||||
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
|
||||
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
|
|
@ -2115,7 +2114,7 @@
|
|||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
/**
|
||||
* LCD Menu Items
|
||||
|
|
@ -2132,13 +2131,13 @@
|
|||
// This option overrides the default number of encoder pulses needed to
|
||||
// produce one step. Should be increased for high-resolution encoders.
|
||||
//
|
||||
#define ENCODER_PULSES_PER_STEP 4
|
||||
//#define ENCODER_PULSES_PER_STEP 4
|
||||
|
||||
//
|
||||
// Use this option to override the number of step signals required to
|
||||
// move between next/prev menu items.
|
||||
//
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 1
|
||||
#define ENCODER_STEPS_PER_MENU_ITEM 2
|
||||
|
||||
/**
|
||||
* Encoder Direction Options
|
||||
|
|
@ -2178,7 +2177,7 @@
|
|||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
//#define INDIVIDUAL_AXIS_HOMING_SUBMENU
|
||||
|
||||
//
|
||||
|
|
@ -2196,8 +2195,8 @@
|
|||
// Note: Test audio output with the G-Code:
|
||||
// M300 S<frequency Hz> P<duration ms>
|
||||
//
|
||||
#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
|
||||
#define LCD_FEEDBACK_FREQUENCY_HZ 1000
|
||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
|
||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
|
||||
|
||||
//=============================================================================
|
||||
//======================== LCD / Controller Selection =========================
|
||||
|
|
@ -2739,24 +2738,24 @@
|
|||
//
|
||||
// 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series
|
||||
//
|
||||
//#define BTT_TFT35_SPI_V1_0
|
||||
#define BTT_TFT35_SPI_V1_0
|
||||
|
||||
//
|
||||
// Generic TFT with detailed options
|
||||
//
|
||||
#define TFT_GENERIC
|
||||
//#define TFT_GENERIC
|
||||
#if ENABLED(TFT_GENERIC)
|
||||
// :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ]
|
||||
#define TFT_DRIVER ST7796
|
||||
#define TFT_DRIVER AUTO
|
||||
|
||||
// Interface. Enable one of the following options:
|
||||
//#define TFT_INTERFACE_FSMC
|
||||
#define TFT_INTERFACE_SPI
|
||||
//#define TFT_INTERFACE_SPI
|
||||
|
||||
// TFT Resolution. Enable one of the following options:
|
||||
//#define TFT_RES_320x240
|
||||
//#define TFT_RES_480x272
|
||||
#define TFT_RES_480x320
|
||||
//#define TFT_RES_480x320
|
||||
//#define TFT_RES_1024x600
|
||||
#endif
|
||||
|
||||
|
|
@ -2774,6 +2773,8 @@
|
|||
#define TFT_COLOR_UI
|
||||
//#define TFT_LVGL_UI
|
||||
|
||||
#define COLOR_BACKGROUND COLOR_DARK
|
||||
|
||||
#if ENABLED(TFT_LVGL_UI)
|
||||
//#define MKS_WIFI_MODULE // MKS WiFi module
|
||||
#endif
|
||||
|
|
@ -2786,7 +2787,7 @@
|
|||
* TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
|
||||
* TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
|
||||
*/
|
||||
#define TFT_ROTATION TFT_ROTATE_180
|
||||
//#define TFT_ROTATION TFT_NO_ROTATION
|
||||
|
||||
//=============================================================================
|
||||
//============================ Other Controllers ============================
|
||||
|
|
@ -2824,7 +2825,7 @@
|
|||
#endif
|
||||
|
||||
#if ENABLED(TFT_COLOR_UI)
|
||||
//#define SINGLE_TOUCH_NAVIGATION
|
||||
#define SINGLE_TOUCH_NAVIGATION
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -2915,16 +2916,16 @@
|
|||
#endif
|
||||
|
||||
// Support for Adafruit NeoPixel LED driver
|
||||
#define NEOPIXEL_LED
|
||||
//#define NEOPIXEL_LED
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
//#define NEOPIXEL_PIN 4 // LED driving pin
|
||||
//#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
|
||||
//#define NEOPIXEL2_PIN 5
|
||||
#define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
|
||||
#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
|
||||
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
|
||||
#define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255)
|
||||
#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
|
||||
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
|
||||
//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
|
||||
|
||||
// Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
|
||||
//#define NEOPIXEL2_SEPARATE
|
||||
|
|
|
|||
|
|
@ -293,7 +293,7 @@
|
|||
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
|
||||
* below 2.
|
||||
*/
|
||||
#define WATCH_TEMP_PERIOD 20 // Seconds
|
||||
#define WATCH_TEMP_PERIOD 40 // Seconds
|
||||
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
|
|
@ -301,13 +301,13 @@
|
|||
* Thermal Protection parameters for the bed are just as above for hotends.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* As described above, except for the bed (M140/M190/M303).
|
||||
*/
|
||||
#define WATCH_BED_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_BED_TEMP_PERIOD 180 // Seconds
|
||||
#define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
|
|
@ -472,9 +472,9 @@
|
|||
* Hotend Idle Timeout
|
||||
* Prevent filament in the nozzle from charring and causing a critical jam.
|
||||
*/
|
||||
//#define HOTEND_IDLE_TIMEOUT
|
||||
#define HOTEND_IDLE_TIMEOUT
|
||||
#if ENABLED(HOTEND_IDLE_TIMEOUT)
|
||||
#define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
|
||||
#define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection
|
||||
#define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
|
||||
#define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout
|
||||
#define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout
|
||||
|
|
@ -535,7 +535,7 @@
|
|||
*
|
||||
* Define one or both of these to override the default 0-255 range.
|
||||
*/
|
||||
//#define FAN_MIN_PWM 50
|
||||
#define FAN_MIN_PWM 80
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
|
|
@ -787,11 +787,11 @@
|
|||
//#define SENSORLESS_BACKOFF_MM { 2, 2, 0 } // (mm) Backoff from endstops before sensorless homing
|
||||
|
||||
#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
//#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe).
|
||||
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
|
|
@ -998,7 +998,7 @@
|
|||
// Increase the slowdown divisor for larger buffer sizes.
|
||||
#define SLOWDOWN
|
||||
#if ENABLED(SLOWDOWN)
|
||||
#define SLOWDOWN_DIVISOR 2
|
||||
#define SLOWDOWN_DIVISOR 4
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -1122,7 +1122,7 @@
|
|||
* vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
|
||||
* lowest stepping frequencies.
|
||||
*/
|
||||
//#define ADAPTIVE_STEP_SMOOTHING
|
||||
#define ADAPTIVE_STEP_SMOOTHING
|
||||
|
||||
/**
|
||||
* Custom Microstepping
|
||||
|
|
@ -1238,7 +1238,7 @@
|
|||
#endif
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#define LCD_INFO_MENU
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
|
||||
#endif
|
||||
|
|
@ -1292,13 +1292,13 @@
|
|||
#endif
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// Show the E position (filament used) during printing
|
||||
//#define LCD_SHOW_E_TOTAL
|
||||
|
|
@ -1307,10 +1307,10 @@
|
|||
// LCD Print Progress options
|
||||
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
|
||||
#if CAN_SHOW_REMAINING_TIME
|
||||
//#define SHOW_REMAINING_TIME // Display estimated time to completion
|
||||
#define SHOW_REMAINING_TIME // Display estimated time to completion
|
||||
#if ENABLED(SHOW_REMAINING_TIME)
|
||||
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
|
||||
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
|
||||
#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -1369,7 +1369,7 @@
|
|||
|
||||
//#define MEDIA_MENU_AT_TOP // Force the media menu to be listed on the top of the main menu
|
||||
|
||||
#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
|
||||
#define EVENT_GCODE_SD_ABORT "G28XY\nM84" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
|
||||
|
||||
#if ENABLED(PRINTER_EVENT_LEDS)
|
||||
#define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
|
||||
|
|
@ -1429,17 +1429,17 @@
|
|||
* - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
|
||||
* - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
|
||||
*/
|
||||
//#define SDCARD_SORT_ALPHA
|
||||
#define SDCARD_SORT_ALPHA
|
||||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code.
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
|
||||
#endif
|
||||
|
|
@ -1452,7 +1452,7 @@
|
|||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
// Enable this option to scroll long filenames in the SD card menu
|
||||
//#define SCROLL_LONG_FILENAMES
|
||||
#define SCROLL_LONG_FILENAMES
|
||||
|
||||
// Leave the heaters on after Stop Print (not recommended!)
|
||||
//#define SD_ABORT_NO_COOLDOWN
|
||||
|
|
@ -1490,7 +1490,7 @@
|
|||
*
|
||||
* [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
|
||||
*/
|
||||
//#define USB_FLASH_DRIVE_SUPPORT
|
||||
#define USB_FLASH_DRIVE_SUPPORT
|
||||
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
|
||||
/**
|
||||
* USB Host Shield Library
|
||||
|
|
@ -1508,7 +1508,7 @@
|
|||
/**
|
||||
* Native USB Host supported by some boards (USB OTG)
|
||||
*/
|
||||
//#define USE_OTG_USB_HOST
|
||||
#define USE_OTG_USB_HOST
|
||||
|
||||
#if DISABLED(USE_OTG_USB_HOST)
|
||||
#define USB_CS_PIN SDSS
|
||||
|
|
@ -1544,7 +1544,7 @@
|
|||
*
|
||||
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
|
||||
*/
|
||||
//#define SDCARD_CONNECTION LCD
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
|
||||
// Enable if SD detect is rendered useless (e.g., by using an SD extender)
|
||||
//#define NO_SD_DETECT
|
||||
|
|
@ -1631,7 +1631,7 @@
|
|||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of PROGMEM.
|
||||
|
||||
// Frivolous Game Options
|
||||
|
|
@ -1644,7 +1644,7 @@
|
|||
|
||||
#if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
|
||||
// Show SD percentage next to the progress bar
|
||||
//#define SHOW_SD_PERCENT
|
||||
#define SHOW_SD_PERCENT
|
||||
|
||||
// Enable to save many cycles by drawing a hollow frame on Menu Screens
|
||||
#define MENU_HOLLOW_FRAME
|
||||
|
|
@ -1862,26 +1862,26 @@
|
|||
*/
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
#define BABYSTEP_WITHOUT_HOMING
|
||||
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
|
||||
#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
|
||||
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
|
||||
#if ENABLED(MOVE_Z_WHEN_IDLE)
|
||||
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
|
||||
#define MOVE_Z_IDLE_MULTIPLICATOR 2 // Multiply 1mm by this factor for the move step size.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
|
|
@ -1954,7 +1954,7 @@
|
|||
//#define PROBING_MARGIN_LEFT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_RIGHT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_FRONT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_BACK PROBING_MARGIN
|
||||
#define PROBING_MARGIN_BACK 60
|
||||
#endif
|
||||
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
|
|
@ -2166,7 +2166,7 @@
|
|||
#if BOTH(SDSUPPORT, DIRECT_STEPPING)
|
||||
#define BLOCK_BUFFER_SIZE 8
|
||||
#elif ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#define BLOCK_BUFFER_SIZE 32
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#endif
|
||||
|
|
@ -2175,7 +2175,7 @@
|
|||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 32
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
|
|
@ -2184,7 +2184,7 @@
|
|||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 32
|
||||
|
||||
// Host Receive Buffer Size
|
||||
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
|
||||
|
|
@ -2402,25 +2402,25 @@
|
|||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 25 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 25 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 10 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 20 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
|
|
@ -2432,18 +2432,18 @@
|
|||
#define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 40 // (mm/s) feedrate to purge before unload
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
|
||||
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
|
|
@ -2701,7 +2701,7 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_CURRENT 950
|
||||
#define E0_MICROSTEPS 16
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
|
|
@ -2997,7 +2997,7 @@
|
|||
* Enable M122 debugging command for TMC stepper drivers.
|
||||
* M122 S0/1 will enable continuous reporting.
|
||||
*/
|
||||
#define TMC_DEBUG
|
||||
//#define TMC_DEBUG
|
||||
|
||||
/**
|
||||
* You can set your own advanced settings by filling in predefined functions.
|
||||
|
|
@ -3677,11 +3677,11 @@
|
|||
//#define NO_WORKSPACE_OFFSETS
|
||||
|
||||
// Extra options for the M114 "Current Position" report
|
||||
#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
#define M114_DETAIL // Use 'M114` for details to check planner calculations
|
||||
//#define M114_REALTIME // Real current position based on forward kinematics
|
||||
//#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
|
||||
|
||||
#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
|
||||
|
||||
/**
|
||||
* Set the number of proportional font spaces required to fill up a typical character space.
|
||||
|
|
@ -3857,8 +3857,8 @@
|
|||
*/
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
#define HOST_PAUSE_M76
|
||||
#define HOST_PROMPT_SUPPORT
|
||||
//#define HOST_PAUSE_M76
|
||||
#define HOST_PROMPT_SUPPORT
|
||||
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
|
||||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue