diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 3f097c09e3..7ebab9d166 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -680,7 +680,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 89d3ff6e20..3862d9c3c7 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index b0d7969ff4..e60d72fb55 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index d25bb8cfeb..ce0254bb54 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index a4a5a06294..9757b8f1d1 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 5d2677e978..82bead75a2 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 66f508d632..81ca9ed8d6 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index e4b3bc9692..2ef855ebc8 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 5e48e8fba5..6fd4dcb5ae 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 1fef120a6a..30e06be9cd 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 09d67fe24f..2f71a49523 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 31fd0cdc61..005652e239 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 4eb7e57ea7..9c2bd681fc 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 9012b35927..bdd1b4b78c 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 2a97abce1b..a0ab88622b 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h index 81e4c40337..9599ba9e8b 100644 --- a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index cc7aba0fc1..5576a144d1 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 4006f9baf9..104e2777cb 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 1ab14938d4..d551e94c50 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -686,7 +686,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 1b96bdb12f..3d349530d9 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index f72e0231c4..2c2a0d8bc1 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index b5ab038094..9f3b6e9831 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 4234140033..1224ed9e7a 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 8260d9f900..ca097f90be 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index c8cb6a258a..10d65a8f62 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 93d428457b..de6e28f1b8 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 78f6c2852f..b33972359a 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 692d1bb57c..3804ed6805 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 60543649e1..4d5f01e7fe 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 0aa5c85f0d..8d70515119 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 46e6dfe3c8..ccc0fde28c 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index 482cd5078d..cdc7b0f625 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h index 04e3dd10d1..fd85e9c322 100644 --- a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h index 91099d19c9..78f71e1e36 100644 --- a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index f6573d665a..5ed4546fa4 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index d56ff97557..de9ee7a3df 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index aa2835607c..edc714b837 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 4931634020..308948206c 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h index 40a8c9a1e9..3683e69822 100644 --- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h index 705594d18a..74fe857a4b 100644 --- a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index dbfa938b9f..b75e403a4e 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 1294caae1b..012caa14eb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 7455f7d0ba..83a154c9ee 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9e1c77b030..fd0622c6d3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index e68364c0bb..6c05f99642 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index ee5c44295c..5271cfc558 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index f2b2bb26d1..a4c6130510 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 7c08fc77e2..05f50df15a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 3832989b98..f68c76f3b8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 0638fc7509..d19aa7cdf6 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 3b5c86c31a..e6402f2f8c 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index cf30498115..cb068e6f10 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index e906686913..4cd6d4fd6b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -686,7 +686,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 605453bbe3..0370c981a6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h index 21871f4b9b..e92f747fec 100644 --- a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h index cd31db948a..5fba072068 100644 --- a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 01c5fe31dc..d85c9fd94a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index fc6963612a..86538e1950 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index a86e6af635..14de350967 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 2737210ab0..5d23f1bdeb 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 8b41c68508..098103e16c 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 04ddba0eb6..a9be5369ad 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 71704d8cab..947ee245ba 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 386ae32b51..5931850145 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index b2b9ff1ffd..57083e8719 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index c82a4643bb..40c581a0a9 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a600d21cd6..7219042eb5 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index b8d31a1b49..ae1ef0e971 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 6bb7a27c46..eb28e0de23 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 6838025d72..d5ab30f30d 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 676bcc91a3..f49f2bc1ad 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 206ad4cd34..ea240fcad6 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -687,7 +687,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 04742b59cb..925a71f2c4 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 20e8045662..1e16f978a6 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 88d8ac94aa..adfe05a385 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 611a743a91..04a5ceadc6 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index d6ee50cd13..594ec85737 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 95930d67e8..5e83d511fb 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 4fd8314011..4b0b311266 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 8a0058cd8c..51734728f8 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 936ff5cb47..6b00da3cf8 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index ca29076448..d6fcdc55a4 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index e031a5c5fb..d4ffe1daa7 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index ca91a29b00..8939a27c6e 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 4d5d41082c..62fd1d0937 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 9e05da7c39..1773c0e303 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index fef0a47307..57f00e7f97 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index aaf12d4774..314d01428a 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index d17ab97ce4..592706cc55 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index a64d43f667..5764d878ad 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 8014f0f565..902360b5e2 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -673,7 +673,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 91b552b7a5..02efeb969a 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h index d134888e28..df9deb830a 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 6c27c08144..5c17f96bd7 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -687,7 +687,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 308b25f131..035944c155 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 9343970bdb..26e04690c5 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -687,7 +687,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index fee8e02042..433848bac2 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 4c409a2408..f52370618b 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index e6c0042d40..f41e2f2ea2 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index 36ebeca6dc..ecfc203df1 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index bfac8e5552..1133ddc3e4 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 858bdcb0f9..d2a9882c4a 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index b0bb91fb5b..7ea1c78a47 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -684,7 +684,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index c19d6fe6de..9e23e99f88 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index b6eb11efd8..c8d063eec2 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1d2d5e61c7..45e97de8a9 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 4f056f7e41..03068d7a0c 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 61c4aae80d..aba986946d 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 789f63034d..cb72e5375d 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 13fcf5b4ca..02a7029688 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 0aea6acf5e..f3f276538f 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index b4064614d0..280f689f82 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index a022713819..0df45bbb04 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 3d4cba0610..88aabfb6d1 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index ba733b0446..66438be03a 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 82f0616221..b110f81ef5 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -679,7 +679,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index b3fff2679a..f57266cb70 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -679,7 +679,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index e507aca3b7..27ce9d6663 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 9b736941a1..218ad58661 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 7794e0f390..42df944160 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 988d409627..75bc1010f6 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index ca0d38d03c..0bd1f09765 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index a1cd2659ea..f82226f32c 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index e9e69714ce..7ba9074331 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 3714b4dae6..6c4ebd63ed 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 86a5dcf7c3..203dfe3f3b 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 12033bc428..a6adcb0c89 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index befece8e36..d8d6bf1fa3 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index bc17811183..62fe2fab3a 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 9586a73dc6..3341dc4377 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index e93084fd30..492e7d9aee 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index f18fa75568..445e15d529 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 14b6db671b..37f07d5e4a 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index f9876dfebd..4d7822a8ca 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -695,7 +695,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 1bc41935b2..ab2615a1d0 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index ce11794505..7db3549805 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 37c872b2e3..b7cf617e46 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 87a5c67c0a..8a1acb4deb 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 4fe6392529..dc008ace42 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index a2bc031be9..ae4298b254 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 1b420bcaa9..5764d97746 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index df85b3e354..3f746dd46c 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 5d77967ffc..8bd867df01 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 5d8e0a7c03..ea848dc969 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -684,7 +684,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 7f54f7be90..53e7b886cb 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 33e5420231..e68be9cb0e 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index d15e3a4c08..20bcf637fd 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 10efe1497d..b2df790ba4 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 02e11b4d29..b530f51687 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 754c47f435..eb81ce00e1 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 79cb5256a4..5d8e7b5990 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 403d1d2d1e..0ef9696d7d 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 3e0e30ac8d..fb56d3b76f 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 7925162d83..843559b901 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index b91bfee945..b826e98bb3 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index efb9bddc49..c8eb1518f4 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 48e5a2c366..100156840e 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index d0207d4436..92c026d696 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 9aaf17d9f8..a7a2a720d1 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 819386616b..16f93a2655 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 6898e3607a..655918807e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index c4176510ad..f57dc4c64a 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 2a8e1049ce..c4b78d9227 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index f28b2ccea3..5f36ed84c0 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 6c21597a14..b13c92da53 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -683,7 +683,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 73b9804104..0af5006961 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f5d26e8383..41de401209 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 7b5e3c6061..6908ca2cf4 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -682,7 +682,7 @@ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode + * On startup, Marlin will compare its eeprom to this value. If the selected mode * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */