3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 06:57:39 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ Ultimaker Original Plus DXU (#945)

Browse source
This commit is contained in:
Anson Liu 2023-07-01 04:42:18 -04:00 • committed by GitHub
parent 581fd41bd9
commit dc74d228c9
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 81 additions and 83 deletions
Download patch file Download diff file Expand all files Collapse all files

89
config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h
View file

@ -164,7 +164,7 @@
//#define V_DRIVER_TYPE A4988 //#define V_DRIVER_TYPE A4988
//#define W_DRIVER_TYPE A4988 //#define W_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988
//#define E1_DRIVER_TYPE A4988 #define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988
//#define E4_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988
@ -259,7 +259,7 @@
#endif #endif
// Switch nozzles by bumping the toolhead. Requires EVENT_GCODE_TOOLCHANGE_#. // Switch nozzles by bumping the toolhead. Requires EVENT_GCODE_TOOLCHANGE_#.
//#define MECHANICAL_SWITCHING_NOZZLE #define MECHANICAL_SWITCHING_NOZZLE
/** /**
* Two separate X-carriages with extruders that connect to a moving part * Two separate X-carriages with extruders that connect to a moving part
@ -585,8 +585,8 @@
#endif #endif
#if HAS_E_TEMP_SENSOR #if HAS_E_TEMP_SENSOR
#define TEMP_RESIDENCY_TIME 1 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
#define TEMP_WINDOW 2 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#endif #endif
@ -634,14 +634,14 @@
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.) // (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 315 #define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 315 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 240 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 240 #define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 240 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 240 #define HEATER_5_MAXTEMP 275
#define HEATER_6_MAXTEMP 240 #define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 240 #define HEATER_7_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 60 #define CHAMBER_MAXTEMP 60
@ -682,9 +682,9 @@
#if ENABLED(PID_PARAMS_PER_HOTEND) #if ENABLED(PID_PARAMS_PER_HOTEND)
// Specify up to one value per hotend here, according to your setup. // Specify up to one value per hotend here, according to your setup.
// If there are fewer values, the last one applies to the remaining hotends. // If there are fewer values, the last one applies to the remaining hotends.
#define DEFAULT_Kp_LIST { 13.20, 13.20 } #define DEFAULT_Kp_LIST { 15.33, 17.18 }
#define DEFAULT_Ki_LIST { 1.17, 1.17 } #define DEFAULT_Ki_LIST { 1.83, 2.10 }
#define DEFAULT_Kd_LIST { 37.31, 37.31 } #define DEFAULT_Kd_LIST { 32.04, 35.14 }
#else #else
#define DEFAULT_Kp 13.20 #define DEFAULT_Kp 13.20
#define DEFAULT_Ki 1.17 #define DEFAULT_Ki 1.17
@ -1225,23 +1225,23 @@
* following movement settings. If fewer factors are given than the * following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest. * total number of extruders, the last value applies to the rest.
*/ */
//#define DISTINCT_E_FACTORS #define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°) * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
* Override with M92 * Override with M92
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 200.0, 369.0 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 200.0, 369.0, 369.0 }
/** /**
* Default Max Feed Rate (linear=mm/s, rotational=°/s) * Default Max Feed Rate (linear=mm/s, rotational=°/s)
* Override with M203 * Override with M203
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 40, 45 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 40, 45, 45 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING) #if ENABLED(LIMITED_MAX_FR_EDITING)
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
#endif #endif
@ -1252,11 +1252,11 @@
* Override with M201 * Override with M201
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]] * X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 9000,9000,100,10000 } #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING) #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
#define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits #define MAX_ACCEL_EDIT_VALUES { 9000, 9000, 200, 20000 } // ...or, set your own edit limits
#endif #endif
/** /**
@ -1328,7 +1328,7 @@
* *
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
*/ */
#define S_CURVE_ACCELERATION //#define S_CURVE_ACCELERATION
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
@ -1344,7 +1344,7 @@
* The probe replaces the Z-MIN endstop and is used for Z homing. * The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.) * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/ */
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing // Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING //#define USE_PROBE_FOR_Z_HOMING
@ -1362,7 +1362,8 @@
* - Normally-closed (NC) also connect to GND. * - Normally-closed (NC) also connect to GND.
* - Normally-open (NO) also connect to 5V. * - Normally-open (NO) also connect to 5V.
*/ */
//#define Z_MIN_PROBE_PIN -1 #define Z_MIN_PROBE_PIN 69 // Pin 32 is the RAMPS default
#define SERVO0_PIN 13
/** /**
* Probe Type * Probe Type
@ -1404,7 +1405,7 @@
/** /**
* The BLTouch probe uses a Hall effect sensor and emulates a servo. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/ */
//#define BLTOUCH #define BLTOUCH
/** /**
* MagLev V4 probe by MDD * MagLev V4 probe by MDD
@ -1556,7 +1557,7 @@
* | [-] | * | [-] |
* O-- FRONT --+ * O-- FRONT --+
*/ */
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } #define NOZZLE_TO_PROBE_OFFSET { 9, -19.5, -1 }
// Enable and set to use a specific tool for probing. Disable to allow any tool. // Enable and set to use a specific tool for probing. Disable to allow any tool.
#define PROBING_TOOL 0 #define PROBING_TOOL 0
@ -1566,13 +1567,13 @@
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 5 #define PROBING_MARGIN 10
// X and Y axis travel speed (mm/min) between probes // X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (133*60) #define XY_PROBE_FEEDRATE (150*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST (4*60) #define Z_PROBE_FEEDRATE_FAST (10*60)
// Feedrate (mm/min) for the "accurate" probe of each point // Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
@ -1640,7 +1641,7 @@
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done //#define Z_AFTER_PROBING 5 // Z position after probing is done
@ -1648,10 +1649,10 @@
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX -5 #define Z_PROBE_OFFSET_RANGE_MAX 0
// Enable the M48 repeatability test to test probe accuracy // Enable the M48 repeatability test to test probe accuracy
//#define Z_MIN_PROBE_REPEATABILITY_TEST #define Z_MIN_PROBE_REPEATABILITY_TEST
// Before deploy/stow pause for user confirmation // Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW //#define PAUSE_BEFORE_DEPLOY_STOW
@ -1666,7 +1667,7 @@
* These options are most useful for the BLTouch probe, but may also improve * These options are most useful for the BLTouch probe, but may also improve
* readings with inductive probes and piezo sensors. * readings with inductive probes and piezo sensors.
*/ */
//#define PROBING_HEATERS_OFF // Turn heaters off when probing #define PROBING_HEATERS_OFF // Turn heaters off when probing
#if ENABLED(PROBING_HEATERS_OFF) #if ENABLED(PROBING_HEATERS_OFF)
//#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
//#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude)
@ -1773,7 +1774,7 @@
// @section geometry // @section geometry
// The size of the printable area // The size of the printable area
#define X_BED_SIZE 216 #define X_BED_SIZE 218
#define Y_BED_SIZE 210 #define Y_BED_SIZE 210
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions. // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
@ -1995,7 +1996,7 @@
*/ */
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR #define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
@ -2045,7 +2046,7 @@
*/ */
#define ENABLE_LEVELING_FADE_HEIGHT #define ENABLE_LEVELING_FADE_HEIGHT
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
#define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #define DEFAULT_LEVELING_FADE_HEIGHT 0.6 // (mm) Default fade height.
#endif #endif
/** /**
@ -2065,11 +2066,11 @@
/** /**
* Enable the G26 Mesh Validation Pattern tool. * Enable the G26 Mesh Validation Pattern tool.
*/ */
//#define G26_MESH_VALIDATION #define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. #define MESH_TEST_HOTEND_TEMP 220 // (°C) Default nozzle temperature for G26.
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26.
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves.
#define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves.
@ -2081,7 +2082,7 @@
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) #if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
#define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_X 5
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// Probe along the Y axis, advancing X after each column // Probe along the Y axis, advancing X after each column
@ -2097,7 +2098,7 @@
// Subdivision of the grid by Catmull-Rom method. // Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh. // Synthesizes intermediate points to produce a more detailed mesh.
// //
//#define ABL_BILINEAR_SUBDIVISION #define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION) #if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points // Number of subdivisions between probe points
#define BILINEAR_SUBDIVISIONS 3 #define BILINEAR_SUBDIVISIONS 3
@ -2249,7 +2250,7 @@
#endif #endif
// Homing speeds (linear=mm/min, rotational=°/min) // Homing speeds (linear=mm/min, rotational=°/min)
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (50*60) } #define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (40*60) }
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
@ -2718,7 +2719,7 @@
// If you have a speaker that can produce tones, enable it here. // If you have a speaker that can produce tones, enable it here.
// By default Marlin assumes you have a buzzer with a fixed frequency. // By default Marlin assumes you have a buzzer with a fixed frequency.
// //
//#define SPEAKER #define SPEAKER
// //
// The duration and frequency for the UI feedback sound. // The duration and frequency for the UI feedback sound.
@ -3504,7 +3505,7 @@
#endif #endif
#if ANY(RGB_LED, RGBW_LED, PCA9632) #if ANY(RGB_LED, RGBW_LED, PCA9632)
#define RGB_STARTUP_TEST // For PWM pins, fade between all colors //#define RGB_STARTUP_TEST // For PWM pins, fade between all colors
#if ENABLED(RGB_STARTUP_TEST) #if ENABLED(RGB_STARTUP_TEST)
#define RGB_STARTUP_TEST_INNER_MS 10 // (ms) Reduce or increase fading speed #define RGB_STARTUP_TEST_INNER_MS 10 // (ms) Reduce or increase fading speed
#endif #endif

75
config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h
View file

@ -496,7 +496,7 @@
// Show Temperature ADC value // Show Temperature ADC value
// Enable for M105 to include ADC values read from temperature sensors. // Enable for M105 to include ADC values read from temperature sensors.
#define SHOW_TEMP_ADC_VALUES //#define SHOW_TEMP_ADC_VALUES
/** /**
* High Temperature Thermistor Support * High Temperature Thermistor Support
@ -1075,22 +1075,20 @@
// //
// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
// //
//#define ASSISTED_TRAMMING #define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING) #if ENABLED(ASSISTED_TRAMMING)
// Define from 3 to 9 points to probe. // Define from 3 to 9 points to probe.
#define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } #define TRAMMING_POINT_XY { { 20, 20 }, { X_BED_SIZE - 20, 20 }, { X_BED_SIZE / 2, Y_BED_SIZE - 20 } }
// Define position names for probe points. // Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_1 "Front-Left"
#define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_2 "Front-Right"
#define TRAMMING_POINT_NAME_3 "Back-Right" #define TRAMMING_POINT_NAME_3 "Back-Center"
#define TRAMMING_POINT_NAME_4 "Back-Left"
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
//#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first #define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first
//#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu
//#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
@ -1173,8 +1171,8 @@
* X<1> Set the given parameters only for the X axis. * X<1> Set the given parameters only for the X axis.
* Y<1> Set the given parameters only for the Y axis. * Y<1> Set the given parameters only for the Y axis.
*/ */
//#define INPUT_SHAPING_X #define INPUT_SHAPING_X
//#define INPUT_SHAPING_Y #define INPUT_SHAPING_Y
#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y) #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
#if ENABLED(INPUT_SHAPING_X) #if ENABLED(INPUT_SHAPING_X)
#define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis. #define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis.
@ -1186,7 +1184,7 @@
#endif #endif
//#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage.
//#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
//#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #define SHAPING_MENU // Add a menu to the LCD to set shaping parameters.
#endif #endif
// @section motion // @section motion
@ -1479,14 +1477,14 @@
//#define LCD_BACKLIGHT_TIMEOUT_MINS 1 // (minutes) Timeout before turning off the backlight //#define LCD_BACKLIGHT_TIMEOUT_MINS 1 // (minutes) Timeout before turning off the backlight
#if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI) #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu #define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(PROBE_OFFSET_WIZARD)
/** /**
* Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
*/ */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define PROBE_OFFSET_WIZARD_START_Z 0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
@ -1527,10 +1525,10 @@
#define TURBO_BACK_MENU_ITEM #define TURBO_BACK_MENU_ITEM
// Insert a menu for preheating at the top level to allow for quick access // Insert a menu for preheating at the top level to allow for quick access
#define PREHEAT_SHORTCUT_MENU_ITEM //#define PREHEAT_SHORTCUT_MENU_ITEM
// Add Configuration > Debug Menu > Endstop Test for endstop/probe/runout testing // Add Configuration > Debug Menu > Endstop Test for endstop/probe/runout testing
//#define LCD_ENDSTOP_TEST #define LCD_ENDSTOP_TEST
#endif // HAS_MARLINUI_MENU #endif // HAS_MARLINUI_MENU
@ -1567,7 +1565,7 @@
#define SOUND_ON_DEFAULT // Buzzer/speaker default enabled state #define SOUND_ON_DEFAULT // Buzzer/speaker default enabled state
// The timeout to return to the status screen from sub-menus // The timeout to return to the status screen from sub-menus
#define LCD_TIMEOUT_TO_STATUS 20000 // (ms) //#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
// Scroll a longer status message into view // Scroll a longer status message into view
#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
@ -1582,7 +1580,7 @@
#define LCD_SHOW_E_TOTAL #define LCD_SHOW_E_TOTAL
// Display a negative temperature instead of "err" // Display a negative temperature instead of "err"
//#define SHOW_TEMPERATURE_BELOW_ZERO #define SHOW_TEMPERATURE_BELOW_ZERO
/** /**
* LED Control Menu * LED Control Menu
@ -1613,7 +1611,7 @@
#endif // HAS_DISPLAY #endif // HAS_DISPLAY
// Add 'M73' to set print job progress, overrides Marlin's built-in estimate // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
//#define SET_PROGRESS_MANUALLY #define SET_PROGRESS_MANUALLY
#if ENABLED(SET_PROGRESS_MANUALLY) #if ENABLED(SET_PROGRESS_MANUALLY)
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done #define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time #define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
@ -1628,14 +1626,14 @@
#if HAS_DISPLAY && ANY(HAS_MEDIA, SET_PROGRESS_MANUALLY) #if HAS_DISPLAY && ANY(HAS_MEDIA, SET_PROGRESS_MANUALLY)
#define SHOW_PROGRESS_PERCENT // Show print progress percentage (doesn't affect progress bar) #define SHOW_PROGRESS_PERCENT // Show print progress percentage (doesn't affect progress bar)
#define SHOW_ELAPSED_TIME // Display elapsed printing time (prefix 'E') #define SHOW_ELAPSED_TIME // Display elapsed printing time (prefix 'E')
//#define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R') #define SHOW_REMAINING_TIME // Display estimated time to completion (prefix 'R')
#if ENABLED(SET_INTERACTION_TIME) #if ENABLED(SET_INTERACTION_TIME)
#define SHOW_INTERACTION_TIME // Display time until next user interaction ('C' = filament change) #define SHOW_INTERACTION_TIME // Display time until next user interaction ('C' = filament change)
#endif #endif
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show/report progress with decimal digits, not all UIs support this #define PRINT_PROGRESS_SHOW_DECIMALS // Show/report progress with decimal digits, not all UIs support this
#if ANY(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) #if ANY(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
#define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
@ -1766,8 +1764,8 @@
//#define UTF_FILENAME_SUPPORT //#define UTF_FILENAME_SUPPORT
#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L' #define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
//#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol #define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
//#define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands #define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands
#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
@ -1938,7 +1936,7 @@
* Adds the menu item Configuration > LCD Timeout (m) to set a wait period * Adds the menu item Configuration > LCD Timeout (m) to set a wait period
* from 0 (disabled) to 99 minutes. * from 0 (disabled) to 99 minutes.
*/ */
#define DISPLAY_SLEEP_MINUTES 30 // (minutes) Timeout before turning off the screen. Set with M255 S. #define DISPLAY_SLEEP_MINUTES 2 // (minutes) Timeout before turning off the screen. Set with M255 S.
/** /**
* ST7920-based LCDs can emulate a 16 x 4 character display using * ST7920-based LCDs can emulate a 16 x 4 character display using
@ -1979,8 +1977,8 @@
//#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
#define STATUS_FAN_FRAMES 4 // :[0,1,2,3,4] Number of fan animation frames #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
#define STATUS_HEAT_PERCENT // Show heating in a progress bar #define STATUS_HEAT_PERCENT // Show heating in a progress bar
// Frivolous Game Options // Frivolous Game Options
//#define MARLIN_BRICKOUT //#define MARLIN_BRICKOUT
@ -2552,7 +2550,7 @@
// The ASCII buffer for serial input // The ASCII buffer for serial input
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 16 #define BUFSIZE 1
// Transmission to Host Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@ -2561,13 +2559,13 @@
// For debug-echo: 128 bytes for the optimal speed. // For debug-echo: 128 bytes for the optimal speed.
// Other output doesn't need to be that speedy. // Other output doesn't need to be that speedy.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256] // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 128 #define TX_BUFFER_SIZE 0
// Host Receive Buffer Size // Host Receive Buffer Size
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
// To use flow control, set this buffer size to at least 1024 bytes. // To use flow control, set this buffer size to at least 1024 bytes.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
#define RX_BUFFER_SIZE 32 //#define RX_BUFFER_SIZE 32
#if RX_BUFFER_SIZE >= 1024 #if RX_BUFFER_SIZE >= 1024
// Enable to have the controller send XON/XOFF control characters to // Enable to have the controller send XON/XOFF control characters to
@ -2708,17 +2706,16 @@
* Extra G-code to run while executing tool-change commands. Can be used to use an additional * Extra G-code to run while executing tool-change commands. Can be used to use an additional
* stepper motor (e.g., I axis in Configuration.h) to drive the tool-changer. * stepper motor (e.g., I axis in Configuration.h) to drive the tool-changer.
*/ */
#define EVENT_GCODE_TOOLCHANGE_T0 "G90\nG0 X210 F7200\nG0 Y165\nG0 X216\nG0 X216 Y183\nG0 X210" // Extra G-code to run while executing tool-change command T0 #define EVENT_GCODE_TOOLCHANGE_T0 "G90\nG0 X211 F7200\nG0 Y167\nG0 X217\nG0 Y182\nG0 X211\nG0 Y166" // Extra G-code to run while executing tool-change command T0
//#define EVENT_GCODE_TOOLCHANGE_T1 "G1 X210\nG1 Y199\nG1 X216\nG1 X216 Y182\nG1 X210" // Extra G-code to run while executing tool-change command T1 #define EVENT_GCODE_TOOLCHANGE_T1 "G90\nG0 X211 F7200\nG0 Y198\nG0 X217\nG0 Y181\nG0 X211\nG0 Y166" // Extra G-code to run while executing tool-change command T1
#define EVENT_GCODE_TOOLCHANGE_T1 "G0 X229 F7200\nG0 Y199\nG0 X235\nG0 X235 Y184\nG0 X229" // Extra G-code to run while executing tool-change command T1 //#define EVENT_GCODE_TOOLCHANGE_ALWAYS_RUN // Always execute above G-code sequences. Use with caution!
//#define EVENT_GCODE_TOOLCHANGE_ALWAYS_RUN // Always execute above G-code sequences. Use with caution!
/** /**
* Consider coordinates for EVENT_GCODE_TOOLCHANGE_Tx as relative to T0 * Consider coordinates for EVENT_GCODE_TOOLCHANGE_Tx as relative to T0
* so that moves in the specified axes are the same for all tools. * so that moves in the specified axes are the same for all tools.
*/ */
//#define TC_GCODE_USE_GLOBAL_X // Use X position relative to Tool 0 #define TC_GCODE_USE_GLOBAL_X // Use X position relative to Tool 0
//#define TC_GCODE_USE_GLOBAL_Y // Use Y position relative to Tool 0 #define TC_GCODE_USE_GLOBAL_Y // Use Y position relative to Tool 0
//#define TC_GCODE_USE_GLOBAL_Z // Use Z position relative to Tool 0 //#define TC_GCODE_USE_GLOBAL_Z // Use Z position relative to Tool 0
/** /**
@ -3780,7 +3777,7 @@
/** /**
* Auto-report position with M154 S<seconds> * Auto-report position with M154 S<seconds>
*/ */
#define AUTO_REPORT_POSITION //#define AUTO_REPORT_POSITION
#if ENABLED(AUTO_REPORT_POSITION) #if ENABLED(AUTO_REPORT_POSITION)
//#define AUTO_REPORT_REAL_POSITION // Auto-report the real position //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
#endif #endif
@ -3835,11 +3832,11 @@
// @section reporting // @section reporting
// Extra options for the M114 "Current Position" report // Extra options for the M114 "Current Position" report
#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_DETAIL // Use 'M114` for details to check planner calculations
#define M114_REALTIME // Real current position based on forward kinematics //#define M114_REALTIME // Real current position based on forward kinematics
//#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) //#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others)
// @section gcode // @section gcode