diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 993674595d..8c0bc152b8 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index cd210a2123..ccfd94bd04 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index bb9caa33fb..f84b42a641 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index d204d36774..b1f9c67ba2 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index b5585959a5..16d2dcf0c6 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1602,6 +1602,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 7877e54965..9b5745c2bb 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index dd31c9deed..a002ad8b98 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 6731d30553..b17b105e65 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 6731d30553..b17b105e65 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 856dbf39da..12ca3966e1 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 622427d0cc..8e7d684702 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index e43f37cb42..8f08b9398b 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 476cc4721a..21b40fdcda 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 6a90f24daa..8b75da54cf 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 345a107aef..e2bc11c920 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 6de79e82f9..f5994dc3e2 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index fb36dc86e3..922769b72e 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index fb36dc86e3..922769b72e 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 1e01371ae3..208e1c81de 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 1e01371ae3..208e1c81de 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index e66d4bec59..004d7e1bba 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index e66d4bec59..004d7e1bba 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index e66d4bec59..004d7e1bba 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index a305ed0e79..0312fa7650 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index fa930d537b..9106ca0e0c 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 2a6e79b8f3..712ead0adf 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index e2b8f60d3c..8d6141567b 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index b200d24105..6a03868421 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 3cef9a6a51..5db5e3c11e 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 34a8d794aa..3b3291657a 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1597,6 +1597,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index c0daafc80d..a00fb63b37 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 52f6bf185f..c381fa1b86 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index ba655c5e5c..924cc1b43a 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index f0e0a6941e..8df0b740ba 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 52f6bf185f..c381fa1b86 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index c0ce8a66c1..5f8b28034c 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 993674595d..8c0bc152b8 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 0cad93ebac..359e043e5a 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 78e735a6f1..5c4e5dd765 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1586,6 +1586,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 95088fbfba..866fb6e922 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index b9419088dc..65e02a2097 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 80a6864d1c..02a0a911f9 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 6c281d1645..9524e453d5 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index e831aba22c..d07ea060eb 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index db487f96ef..e048c28e9e 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1601,6 +1601,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e831aba22c..d07ea060eb 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 94ed7b1d37..f5bcf980fe 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 182bc74b56..d8d8e2b5ae 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d702b810f1..046b6a393e 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index d73bdf36f4..2731d7cc87 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 8505ef883b..d56a0ff52b 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index dbd0ac0ee0..bebfaba5d5 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index c220465ad5..aaeb308f50 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index dbd0ac0ee0..bebfaba5d5 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 0ddc108976..2af9937569 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 243abeb871..6c45cfb8c8 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 185fe9c621..e32d235f7d 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3c8676647f..323f56dcb9 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 554a9449dd..7bfca182aa 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index a13943358d..2027abdfdd 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ca52b71e5b..47190412e7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index f5c3a124ad..7018bcfc2e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index aa4dd98159..9ff08bd4bc 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index b47f9887fc..0b423a60a5 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index a86b370c7a..c0e5f5db98 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index b92a53c051..a219ea9dfb 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 71f61c2e47..3bfb776345 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 946e088edf..4eda087073 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 2de5ee9512..5b34886032 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 8e4e257bd2..6a315776aa 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 7e2383c22b..3b0da72324 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index d84e2712f3..a877f00632 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 906046bfca..4c8486e871 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 95c8196ff4..c3f4aec443 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index aa481ba407..90f902619b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 204236ca26..9df5bbbe04 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 16aeee855f..5fdd4c511e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 6313512140..c7c81f5f7c 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index ba415697d0..c14710e3cc 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 0c2fb00502..c796247f35 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 08bc9364c5..62e2cf958e 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -1594,6 +1594,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index c02a534a79..53bd99eacf 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 7d4001467c..003e688d73 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 38d30f4447..23af836225 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 98d52ecb8c..f97d04b1fc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 38d30f4447..23af836225 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 42e5e192ba..ea9b9e9e30 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 2eb1056bc8..461861e35c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 3355128c39..3680d5e178 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d41e28b501..d22df04948 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 1353592ccf..b5a810e6b9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 2a18c3ed5a..0a7d46af7c 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 90d8511f7d..7129a03d66 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 7c198b715a..46906c7efc 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index f00682159b..4c0295c195 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index f00682159b..4c0295c195 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index f00682159b..4c0295c195 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index f00682159b..4c0295c195 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index b2e3dd2c5f..9f9211311b 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index ced03c8f06..e17691ef7f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index afeec60e9f..729cb1019b 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 911427d823..f65cc8decd 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 62970db844..46fbf5356e 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 194260bb79..7228b041c7 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 8f77a04086..5ec3fc74ca 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 7efc13997c..dd1e3e03bd 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index fc96941724..3a74a227c8 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index fc5de8da84..bf16e49ed9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 729565332f..3154e48f1d 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index b528671208..7bca6cd634 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 4db16f1709..1189249484 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 088ecf8bb8..f012fde071 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1597,6 +1597,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 7efc13997c..dd1e3e03bd 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 1b64cab802..8230b3b748 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 3355128c39..3680d5e178 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 95fdddb97e..81f5f19639 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 2959b3f209..65d702e985 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 99286e2c0d..c4fcb53cd9 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 3f098da4d0..8add682100 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 696d9ac723..bcb2a7a90a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index da6a31b19d..c73ec1fb4f 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 022c1a0f8e..68f601f82c 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 704b127255..7cbaab7629 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 4dbd2b9453..198972376b 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index f8074f2d70..b38b98049b 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index c8f2bc711d..20fdcf8ad7 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 2b72ff160b..a7b0699de1 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 429dbe30ad..ec4157978f 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 008b31d701..b08700c655 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 03a5646207..8b87e2bf03 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 03a5646207..8b87e2bf03 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 16294cb8a2..506fa573f8 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index cc8a7d150d..c3734fd8b4 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1592,6 +1592,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 68dd22fbb7..fcbd7c986f 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 59e2b87948..0cc27ae8c3 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1596,6 +1596,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index 993674595d..8c0bc152b8 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 4d71b86a29..d48c483654 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 0be4e009a7..912aa65fd9 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index cf6b5dc662..ed6a29545a 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index ee0cf18c9a..c12e7514ee 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1597,6 +1597,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 17219ed3b2..5c3b66c168 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index dcff60552a..d224de2b94 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 343698239a..fdcc6fec5d 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 343698239a..fdcc6fec5d 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 17219ed3b2..5c3b66c168 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 343698239a..fdcc6fec5d 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 343698239a..fdcc6fec5d 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index c12555de3b..3268a0c48e 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index c12555de3b..3268a0c48e 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index c12555de3b..3268a0c48e 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 594b68ec0c..184ea6862d 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 594b68ec0c..184ea6862d 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 594b68ec0c..184ea6862d 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 266827c10a..1ab3ca233f 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 008b31d701..b08700c655 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 594b68ec0c..184ea6862d 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 266827c10a..1ab3ca233f 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index ad35280fb7..dbdf4ac1ea 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 008b31d701..b08700c655 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 7b3402ca06..2e7e47cfcc 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 134bb4b580..1b3cacd401 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 17219ed3b2..5c3b66c168 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 17219ed3b2..5c3b66c168 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 2fdf4a6f16..bc6ce1fccb 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index a5aebf54b9..83690feb7f 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index c9cfa81b43..8945ff319b 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index ffd1ee76b5..17d2d497b3 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1592,6 +1592,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 8cc73e28f0..935da80102 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1598,6 +1598,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 8eb55685e7..40c0dd2238 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 8cc73e28f0..935da80102 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1598,6 +1598,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 49fb505f3d..02871e0ecb 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 0bcbeea5bf..2fc090a4e7 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index fb36dc86e3..922769b72e 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index a234c4ccac..2671304852 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 367f576774..7d6071bcaa 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 347c84a316..a1a2974e25 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 64c2bb9bbc..0d5f1a62a7 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index cf08c56971..c607dccf1b 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index ff9507e6dd..2fc0206fba 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 9f49e12810..422497bed7 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 993674595d..8c0bc152b8 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 71cd5c9196..04c6e52691 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 43e88fd095..a7e201c2bc 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index bd758c4185..3c45c1326a 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 1b5524c80f..0a1073582c 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 8b906df3e0..f3ba62e1f7 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 7d1e2d5dce..19f7b88991 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index f44a851f1f..08192a262d 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index f3fa9a4cd9..e52274b820 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 856dbf39da..12ca3966e1 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 73696cd413..2a3e428375 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index bf9f6e59da..0d530229e2 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index bf9f6e59da..0d530229e2 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index bf9f6e59da..0d530229e2 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 0c623a320f..2f8e0ea834 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 9da5cd8daf..10941aa1bd 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1590,6 +1590,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index c8bb8ccde0..8ee86815bf 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1590,6 +1590,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 4660bbd747..67709b2d91 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index c57049ebbc..a169313361 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 14eed0c712..9b281157f9 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index e89d99959d..42759505b2 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1597,6 +1597,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 720d88af1b..cbd8e68642 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 26b382ed7f..3982507348 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index ad9a26534f..1d75f6352e 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 9435416d14..8ea12ce0de 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 247973467a..866ac769d5 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 27aff95fcb..17db317eb4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index ee6775c707..fb1f50c31c 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index f19887f5a6..a1dc96fb95 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index c2fa19dcec..f45a2fb8f1 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index c2fa19dcec..f45a2fb8f1 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index d8b775c794..046d851a94 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 5be80ccb55..90887d7773 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index d91525d45b..c55229869b 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 763a4da6fb..d96dce7a9f 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index df09001ec1..7bb9fe4ebd 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 09f6278137..1ad391801e 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 38bdb4ba46..cb5b9d0674 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 895d13dcc9..0f3537427f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 895d13dcc9..0f3537427f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 895d13dcc9..0f3537427f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 885d1b1a84..4c3adfa0ff 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1599,6 +1599,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index bcf0c73c30..6ba522ad64 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 9ef8faf0bc..8923a8ad40 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index ccefdda945..6239cbba01 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index bdf8e6dce3..6ba3465c9c 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 5643d61d0c..8131031956 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index d5e9dfcba3..c44ba775df 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' #define BINARY_FILE_TRANSFER diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index b7684e518f..f55dbddae2 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index ddcbadb1a0..f5d3f921db 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1606,6 +1606,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index ed178b9261..bbe8b3a5d3 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index ed178b9261..bbe8b3a5d3 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index f18e13f4e8..108688892f 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 19642298fa..a396d652e9 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 613d6ce0c4..1c388db33e 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index f54cebac0e..bbebe63b3a 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 543015c660..41188417ae 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 993674595d..8c0bc152b8 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 9d58e37562..5458b13c7f 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 0ca7b7d1b7..0fda630c79 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index e122c4cbfc..6b7a3078bf 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 7a83370b0f..4d17ec5554 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1596,6 +1596,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 4360211f9d..8d63fc9c24 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 3e9383b992..337de47ed2 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1596,6 +1596,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index a2dfd8193f..997bcd34e0 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index a2dfd8193f..997bcd34e0 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index d7d1529540..8d42cdc24b 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 69de88fe09..58fe723b1e 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 2a1f9c7fb8..f973f10643 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1596,6 +1596,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 0f04869bcf..95e3135ddd 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 0f04869bcf..95e3135ddd 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index c73539f69f..0048f311da 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 4a50e6d1e5..c7820c0c57 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 86a8c3b241..b46694e449 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 86a8c3b241..b46694e449 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 86a8c3b241..b46694e449 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index d8411bd918..c48471fee7 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 58fd0a203c..02b499a129 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 517c3f5825..57865c29a5 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 190a4abfc7..cf611265a7 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 1ede9fb46b..9789c44f93 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index c73539f69f..0048f311da 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3c801052c1..519662b225 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 1d36ded41c..7540d9ae53 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1595,6 +1595,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 80ae9e9d62..b37604cff5 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index c4bb849cad..891764f379 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index a17bbc4ffe..f9829c904c 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 3523be728f..84f7cebb30 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1593,6 +1593,14 @@ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF #endif + /** + * Enable this option if you have more than ~3K of unused flash space. + * Marlin will embed all settings in the firmware binary as compressed data. + * Use 'M503 C' to write the settings out to the SD Card as 'mc.zip'. + * See docs/ConfigEmbedding.md for details on how to use 'mc-apply.py'. + */ + //#define CONFIGURATION_EMBEDDING + // Add an optimized binary file transfer mode, initiated with 'M28 B1' //#define BINARY_FILE_TRANSFER