diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index a8d23a33f7..c4a0971d26 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1639,6 +1639,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
index 6430dbb749..aac7f2bff0 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration.h	
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
index d6f0e9604e..4e0a85dac9 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration.h	
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 02a460df81..dd1ce37824 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1625,6 +1625,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
index cc9f55eabd..e82eca0140 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1685,6 +1685,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index cd50061259..5dbde3a40a 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -1685,6 +1685,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 386d7f6bdb..47163d1294 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 19bc22eac9..5c3feaf586 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1618,6 +1618,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index fc81e61c66..195e6c8685 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 11846c9035..3e6f109003 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 6ce1598779..101a160afe 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -1720,6 +1720,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 0d9a381259..69979e1481 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -1620,6 +1620,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index d3eb57274e..8e3c90df09 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -1618,6 +1618,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
index 5306761d69..59fedc8389 100644
--- a/config/examples/Anet/E10/Configuration.h
+++ b/config/examples/Anet/E10/Configuration.h
@@ -1605,6 +1605,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index f1982f8ee6..967b0dfa63 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -1619,6 +1619,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AnyCubic/Mega Zero/Configuration.h b/config/examples/AnyCubic/Mega Zero/Configuration.h
index 3d6f27cf83..17b5c9c89a 100644
--- a/config/examples/AnyCubic/Mega Zero/Configuration.h	
+++ b/config/examples/AnyCubic/Mega Zero/Configuration.h	
@@ -1613,6 +1613,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h
index 3439bd9cf4..102a6e6ff0 100644
--- a/config/examples/AnyCubic/i3 Mega/Configuration.h	
+++ b/config/examples/AnyCubic/i3 Mega/Configuration.h	
@@ -1634,6 +1634,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 37d9c37469..8afb12ef29 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 3de522c1c4..44fa23ce13 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h
index a67e3d6c08..d5268ea4dd 100644
--- a/config/examples/Artillery/Genius/Configuration.h
+++ b/config/examples/Artillery/Genius/Configuration.h
@@ -1590,6 +1590,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h
index e0b0bfe361..bb698ef44a 100644
--- a/config/examples/Artillery/Sidewinder X1/Configuration.h	
+++ b/config/examples/Artillery/Sidewinder X1/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h
index 35712c39a8..7761453cc7 100644
--- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h	
+++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h	
@@ -1622,6 +1622,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 136ba86bf7..300ba79594 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 3a880a966a..3bc87c0b88 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index e032ad1d11..2cdec1631e 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index ea695e39f0..05d47331cd 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -1595,6 +1595,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 26c832fa85..18dd72fdb3 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 31ad17cf9c..e7bd7a444e 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -1595,6 +1595,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
index 1ebba00511..24176ad219 100644
--- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h	
+++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 002e249c7c..72ad12a055 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -1606,6 +1606,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h
index ce5dff7345..2106e989f3 100644
--- a/config/examples/Copymaster3D/300/Configuration.h
+++ b/config/examples/Copymaster3D/300/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h
index c0c1d59c9b..91c2cb084a 100644
--- a/config/examples/Copymaster3D/400/Configuration.h
+++ b/config/examples/Copymaster3D/400/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h
index 90145f7919..3858b370f5 100644
--- a/config/examples/Copymaster3D/500/Configuration.h
+++ b/config/examples/Copymaster3D/500/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h
index c4f246cecd..70df8e8a4f 100644
--- a/config/examples/Creality/CR-10 V2/Configuration.h	
+++ b/config/examples/Creality/CR-10 V2/Configuration.h	
@@ -1638,6 +1638,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index c541f661ed..16c09b7261 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 1971a5b648..f38ce79151 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 33059fd94e..c83bed89d8 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -1610,6 +1610,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10mini/CrealityV1/Configuration.h
index 11a96a0dc0..20c13d8ce2 100644
--- a/config/examples/Creality/CR-10mini/CrealityV1/Configuration.h
+++ b/config/examples/Creality/CR-10mini/CrealityV1/Configuration.h
@@ -1626,6 +1626,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h
index 7b90f2c05c..ac32a08e31 100644
--- a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h
+++ b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index 87b8774960..6727831ea3 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index e868be5fc8..60fb95a577 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index a43f635740..fbfcaf5ab7 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 4483fd6b0b..5409e38521 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h
index 86d004464e..e6262c1fbb 100644
--- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3 Pro/Configuration.h b/config/examples/Creality/Ender-3 Pro/Configuration.h
index 4babfcddc2..af24380a70 100644
--- a/config/examples/Creality/Ender-3 Pro/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/Configuration.h	
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h
index 1403523392..a002593dca 100644
--- a/config/examples/Creality/Ender-3 V2/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h
index 5e9073bdb5..eadfbc2590 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h	
@@ -1599,6 +1599,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h
index 07d43da3ee..d33b725c76 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h	
@@ -1600,6 +1600,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h
index 2ee3ee9232..0d0551c5ad 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1600,6 +1600,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
index 392f72f5c4..6092f63581 100644
--- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
+++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h
index 55a5ca63fe..e5a36582ff 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h
index eaa814c755..9a0f94919a 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h
index 6aaa50a8f3..66ee7cc746 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h
index 8f0c49017d..1d1c36acc9 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
index e2efbb564d..5075b6977e 100644
--- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
+++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 98dfc4e2e3..1ac6f9b399 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-5 Pro/Configuration.h b/config/examples/Creality/Ender-5 Pro/Configuration.h
index 01c673873a..62c21d2785 100644
--- a/config/examples/Creality/Ender-5 Pro/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/Configuration.h	
@@ -1605,6 +1605,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration.h
index c86d98602f..4a32db103d 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration.h	
@@ -1649,6 +1649,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h
index a2f30e47a0..96c3240cab 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1600,6 +1600,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-5/Creality/Configuration.h b/config/examples/Creality/Ender-5/Creality/Configuration.h
index 8a3c1ec411..427dd31dfa 100644
--- a/config/examples/Creality/Ender-5/Creality/Configuration.h
+++ b/config/examples/Creality/Ender-5/Creality/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Creality/Ender-5_Plus/Configuration.h b/config/examples/Creality/Ender-5_Plus/Configuration.h
index eedac62967..f48a860397 100644
--- a/config/examples/Creality/Ender-5_Plus/Configuration.h
+++ b/config/examples/Creality/Ender-5_Plus/Configuration.h
@@ -1599,6 +1599,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index db19d556b3..56c1f62f9a 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h
index c2d202b808..b793a720a8 100644
--- a/config/examples/Daycom/3DP-100/Configuration.h
+++ b/config/examples/Daycom/3DP-100/Configuration.h
@@ -1614,6 +1614,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h
index 4ec993cf20..6a191fae82 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h	
@@ -1605,6 +1605,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 87071d1fd5..95421d825c 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index 359ae7a63f..a978e03663 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index 137c2a6243..c96c8bc276 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -1609,6 +1609,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h
index ab72f68a1f..864eac78da 100644
--- a/config/examples/FYSETC/S6/Configuration.h
+++ b/config/examples/FYSETC/S6/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index 2b27a55155..84209380f5 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -1589,6 +1589,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h
index 13e5dfe3dd..9af4605517 100644
--- a/config/examples/Felix/Single/Configuration.h
+++ b/config/examples/Felix/Single/Configuration.h
@@ -1589,6 +1589,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h
index 2b21da5c9f..60f095e2ba 100644
--- a/config/examples/FlashForge/Creator 2X/Configuration.h	
+++ b/config/examples/FlashForge/Creator 2X/Configuration.h	
@@ -1599,6 +1599,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index f49b31c973..68c80e348b 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -1600,6 +1600,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h
index 1742457fec..05a4e94fca 100644
--- a/config/examples/FlyingBear/P905H/Configuration.h
+++ b/config/examples/FlyingBear/P905H/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 93e8764c6b..795f01deec 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1613,6 +1613,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 86006ed038..c293c6d899 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -1712,6 +1712,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 3e5e317c2b..416d3c039f 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -1593,6 +1593,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 2188f10a9a..f3f3671b1d 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -1620,6 +1620,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 75b7523f20..ff5bae378c 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -1590,6 +1590,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h
index 94983f0684..22e6e835b7 100644
--- a/config/examples/Geeetech/A10D/Configuration.h
+++ b/config/examples/Geeetech/A10D/Configuration.h
@@ -1591,6 +1591,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 7dead356c8..de8c8a9389 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -1592,6 +1592,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h
index 4569915178..df32963dfb 100644
--- a/config/examples/Geeetech/A10T/Configuration.h
+++ b/config/examples/Geeetech/A10T/Configuration.h
@@ -1593,6 +1593,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h
index 8e4f118e45..489f71354e 100644
--- a/config/examples/Geeetech/A20/Configuration.h
+++ b/config/examples/Geeetech/A20/Configuration.h
@@ -1591,6 +1591,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index f1db369275..15e7588ad7 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -1592,6 +1592,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h
index 6b6990f88b..69dc7a6af6 100644
--- a/config/examples/Geeetech/A20T/Configuration.h
+++ b/config/examples/Geeetech/A20T/Configuration.h
@@ -1593,6 +1593,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h
index 9c7c3cf27a..d0149c850f 100644
--- a/config/examples/Geeetech/A30/Configuration.h
+++ b/config/examples/Geeetech/A30/Configuration.h
@@ -1589,6 +1589,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h
index 46c3ce4b30..bba9bf75a8 100644
--- a/config/examples/Geeetech/D200/Configuration.h
+++ b/config/examples/Geeetech/D200/Configuration.h
@@ -1589,6 +1589,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h
index 66806dd05b..46c924b3b8 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration.h
@@ -1604,6 +1604,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h
index 4788c3d847..f699a33b62 100644
--- a/config/examples/Geeetech/E180/Configuration.h
+++ b/config/examples/Geeetech/E180/Configuration.h
@@ -1590,6 +1590,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index bbcbf86971..3a9cedb167 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -1620,6 +1620,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index d0e46f2913..cbd2a855d3 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h
index 5693f2ae4d..eeca7edfe9 100644
--- a/config/examples/Geeetech/M201/Configuration.h
+++ b/config/examples/Geeetech/M201/Configuration.h
@@ -1589,6 +1589,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 799657f0c7..aa6fc19ab9 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -1614,6 +1614,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h
index 2697bd95f7..5443a7b0bd 100644
--- a/config/examples/Geeetech/Me_creator/Configuration.h
+++ b/config/examples/Geeetech/Me_creator/Configuration.h
@@ -1606,6 +1606,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h
index 347bf4af51..7fdbfec16b 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration.h
@@ -1604,6 +1604,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h
index ad75f457db..706719ce0e 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration.h	
@@ -1626,6 +1626,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 643fd8b8eb..fe4cd4c12f 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -1626,6 +1626,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index f4797f546d..a6019d6637 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -1625,6 +1625,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 8b3d95c2ba..d65b30ce53 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index dfebfb08d6..dda16c40a2 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h
index cac3d2d78e..cfeb444aa0 100644
--- a/config/examples/HMS434/Configuration.h
+++ b/config/examples/HMS434/Configuration.h
@@ -1592,6 +1592,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   #define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index dec62f12d6..b2b0279a12 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration.h b/config/examples/Intamsys/FunmatHT_4988/Configuration.h
index c200be82af..d56a0939d7 100644
--- a/config/examples/Intamsys/FunmatHT_4988/Configuration.h
+++ b/config/examples/Intamsys/FunmatHT_4988/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index d2c91b6e00..50845dd2b8 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -1610,6 +1610,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h
index f5e0c6a099..b0f05f8f45 100644
--- a/config/examples/JGAurora/A3/Configuration.h
+++ b/config/examples/JGAurora/A3/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index b36f5ca878..b5666895ce 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1618,6 +1618,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 4ca21ba43a..ef441aadcd 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -1610,6 +1610,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h
index efbdb11f7d..ef5ef90311 100644
--- a/config/examples/JGAurora/Magic/Configuration.h
+++ b/config/examples/JGAurora/Magic/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h
index f22ff8b55e..ff49b2691d 100644
--- a/config/examples/Kingroon/KP3/Configuration.h
+++ b/config/examples/Kingroon/KP3/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h
index 10dc7d71d3..83e72dbcdd 100644
--- a/config/examples/MBot/Cube/Configuration.h
+++ b/config/examples/MBot/Cube/Configuration.h
@@ -1598,6 +1598,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration.h b/config/examples/MakerFarm/Pegasus_12/Configuration.h
index ee7823a890..5337ada3ed 100644
--- a/config/examples/MakerFarm/Pegasus_12/Configuration.h
+++ b/config/examples/MakerFarm/Pegasus_12/Configuration.h
@@ -1610,6 +1610,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 8083508cd3..9493e4f722 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 4ceb64220a..8ff9d506e3 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -1635,6 +1635,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index b0d2555397..ef9295bb62 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 0bef022ad2..3af43b2b89 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 2ba7196614..1cf63de147 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h
index 620f98c823..051175ece7 100644
--- a/config/examples/Mks/Robin_Lite3/Configuration.h
+++ b/config/examples/Mks/Robin_Lite3/Configuration.h
@@ -1614,6 +1614,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h
index 4bbd0dfefe..5f09c4aae2 100644
--- a/config/examples/Mks/Robin_Pro/Configuration.h
+++ b/config/examples/Mks/Robin_Pro/Configuration.h
@@ -1613,6 +1613,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index 742f1ef1a7..13abdc49fd 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h
index 7d1fee8145..f5d30afe12 100644
--- a/config/examples/Modix/Big60/Configuration.h
+++ b/config/examples/Modix/Big60/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h
index ff1069a10c..37e7c7ce18 100644
--- a/config/examples/Ortur 4/Configuration.h	
+++ b/config/examples/Ortur 4/Configuration.h	
@@ -1592,6 +1592,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 14fd5333cf..b12168fa32 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h
index 6248c4fb02..0300b71b10 100644
--- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h	
+++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
index 7d2ce949c8..361973269e 100644
--- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
+++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
@@ -1590,6 +1590,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h
index 4e568466af..9cd1067ca6 100644
--- a/config/examples/Qidi/Qidi 1/Configuration.h	
+++ b/config/examples/Qidi/Qidi 1/Configuration.h	
@@ -1604,6 +1604,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index fcef3ee036..ff1ab83c24 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h
index 71c3148cf7..5aa5f8d5ac 100644
--- a/config/examples/Renkforce/RF100/Configuration.h
+++ b/config/examples/Renkforce/RF100/Configuration.h
@@ -1615,6 +1615,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h
index 2ed1d91d4f..b7cb9ef95e 100644
--- a/config/examples/Renkforce/RF100XL/Configuration.h
+++ b/config/examples/Renkforce/RF100XL/Configuration.h
@@ -1615,6 +1615,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h
index 29d83b4877..53c5ab320d 100644
--- a/config/examples/Renkforce/RF100v2/Configuration.h
+++ b/config/examples/Renkforce/RF100v2/Configuration.h
@@ -1615,6 +1615,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 8029ba2a3c..13d2c99819 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1655,6 +1655,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index d8b9ddab53..13b634bce5 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 1705ecc30a..46d8f31e64 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -1605,6 +1605,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h
index e03403e973..aca43d0126 100644
--- a/config/examples/Robo3D/R1+/Configuration.h
+++ b/config/examples/Robo3D/R1+/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h
index cefca0f387..6e34308843 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration.h
@@ -1629,6 +1629,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h
index 37756a8e3b..c09c28d394 100644
--- a/config/examples/SCARA/Morgan/Configuration.h
+++ b/config/examples/SCARA/Morgan/Configuration.h
@@ -1629,6 +1629,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 9cabccc899..6b34e04656 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h
index 2912db9be1..1774026d8f 100644
--- a/config/examples/STM32/STM32F103RE/Configuration.h
+++ b/config/examples/STM32/STM32F103RE/Configuration.h
@@ -1609,6 +1609,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 3aff24ca10..04daa675d9 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 263eee5f7d..357e2ea135 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -1638,6 +1638,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Sovol/SV-01/Configuration.h b/config/examples/Sovol/SV-01/Configuration.h
index 620f1514d9..245dc7e321 100644
--- a/config/examples/Sovol/SV-01/Configuration.h
+++ b/config/examples/Sovol/SV-01/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index 8656b13643..7f2a3fb67d 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h
index a9c61dae0d..926af3b4fa 100644
--- a/config/examples/Tevo/Nereus/Configuration.h
+++ b/config/examples/Tevo/Nereus/Configuration.h
@@ -1591,6 +1591,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index 94e18f3b3c..9f875311ca 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index 5fd4132264..4c8bf0bad3 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index fac65adf7a..d38f081d95 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h	
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index dff539f31b..ba2212b3f6 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index b1400c88c7..7dbc0c175b 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -1663,6 +1663,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 7d889e0179..04ca0e7cee 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 5d7ed05ed9..5a7ec94a27 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -1611,6 +1611,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index df80b6d908..743a2c59fa 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -1626,6 +1626,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index d16117b3f7..b08054c4d3 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h
index 4196771b3f..c4b53cdd18 100644
--- a/config/examples/Tronxy/X5SA/Configuration.h
+++ b/config/examples/Tronxy/X5SA/Configuration.h
@@ -1609,6 +1609,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index d1b42a6376..5d0ca96fba 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1618,6 +1618,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 3be32c2078..6f3a1c03b8 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 0956e280ae..2c15143666 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 0d696b04b6..afb6c52168 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -1616,6 +1616,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 68c523ca0d..905de4c232 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -1635,6 +1635,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index e8d93bec02..5e35f12039 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h
index 4d83adf19c..43253619df 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 03b309deb2..222390088d 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -1620,6 +1620,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h
index ef9843135d..20bbb329b2 100644
--- a/config/examples/Wanhao/Duplicator 4S/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h	
@@ -1599,6 +1599,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index f94ae3fbe7..f198dc8edb 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h
index 33cf47db02..3bb9261b96 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
@@ -1617,6 +1617,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index 0afb024014..20eb8ef91c 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h
index de9590060b..87d9c3f79c 100644
--- a/config/examples/Weistek/wt150/Configuration.h
+++ b/config/examples/Weistek/wt150/Configuration.h
@@ -1612,6 +1612,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h
index f3464ece91..550d4bd84e 100644
--- a/config/examples/Zonestar/P802M/Configuration.h
+++ b/config/examples/Zonestar/P802M/Configuration.h
@@ -1608,6 +1608,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index add3304126..c8c008d4f7 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -1607,6 +1607,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h
index 04ad6422c7..e724ad9644 100644
--- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h	
+++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h	
@@ -1779,6 +1779,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index b3f7891011..c5f80abb67 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -1773,6 +1773,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h
index d3073c5f05..59de05cb5c 100644
--- a/config/examples/delta/Anycubic/Predator/Configuration.h
+++ b/config/examples/delta/Anycubic/Predator/Configuration.h
@@ -1709,6 +1709,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h
index 626e88ba4b..10852d0c79 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h
@@ -1715,6 +1715,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
index 7f5c877cb7..086006f3fa 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
@@ -1726,6 +1726,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h
index f8c86d8ede..29a9324dd1 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h
@@ -1716,6 +1716,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index f7ff642aba..c9bab47cc9 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1719,6 +1719,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index e6c65668e3..01bbcff57a 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1718,6 +1718,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index a893e416fc..e55dfbc687 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1718,6 +1718,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h
index 139467b2b1..5c3d5c4d29 100644
--- a/config/examples/delta/Geeetech/G2/Configuration.h
+++ b/config/examples/delta/Geeetech/G2/Configuration.h
@@ -1702,6 +1702,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h
index 3be389029a..cd0e36a513 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h
@@ -1702,6 +1702,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h
index 7cd4d76cd9..820c24f54b 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration.h
@@ -1702,6 +1702,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h
index dfa978601a..b377c59720 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h
@@ -1702,6 +1702,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 5ddbc9f883..1c944867b0 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
@@ -1706,6 +1706,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 7717ade4a3..40a51dc5a6 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1721,6 +1721,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index a678e26309..0741af90fe 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -1706,6 +1706,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h
index 162ac2dea3..745d388da6 100644
--- a/config/examples/delta/Malyan M300/Configuration.h	
+++ b/config/examples/delta/Malyan M300/Configuration.h	
@@ -1677,6 +1677,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 66f5c4b60a..683f3410e4 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h	
@@ -1710,6 +1710,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 9a8ea4d223..c5808bf77a 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -1706,6 +1706,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h
index f342a705a7..ee98a2147b 100644
--- a/config/examples/delta/kossel_clear/Configuration.h
+++ b/config/examples/delta/kossel_clear/Configuration.h
@@ -1700,6 +1700,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 681b005bfd..d0135a6881 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -1708,6 +1708,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index da9e026d6d..0a391a3282 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -1708,6 +1708,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 3edcbf19ae..5431835831 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -1709,6 +1709,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 9dec81831b..7b4f211d96 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1619,6 +1619,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 09f9696aeb..3fcb510e55 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -1610,6 +1610,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index c943c77481..a71d59862e 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -1602,6 +1602,10 @@
 
   // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
   //#define NOZZLE_CLEAN_NO_Z
+
+  // Explicit wipe G-code script applies to a G12 with no arguments.
+  //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
+
 #endif
 
 /**