🎨 Fix PROBING_MARGIN comment

Followup to 4b6a922e9c

config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h

@@ -1754,7 +1754,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -1750,7 +1750,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 // X and Y axis travel speed between probes.

config/examples/delta/Anycubic/Predator/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Dreammaker/Overlord/Configuration.h

@@ -1690,7 +1690,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5
 
 // X and Y axis travel speed between probes.

config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h

@@ -1697,7 +1697,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h

@@ -1692,7 +1692,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h

@@ -1690,7 +1690,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/QQ-S/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/QQS-Pro/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1694,7 +1694,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -1693,7 +1693,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 20
 
 // X and Y axis travel speed between probes.

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1693,7 +1693,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Geeetech/G2/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1
 
 // X and Y axis travel speed between probes.

config/examples/delta/Geeetech/G2Pro/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1
 
 // X and Y axis travel speed between probes.

config/examples/delta/Geeetech/G2S/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1
 
 // X and Y axis travel speed between probes.

config/examples/delta/Geeetech/G2SPro/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1
 
 // X and Y axis travel speed between probes.

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -1696,7 +1696,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/MKS/SBASE/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Malyan M300/Configuration.h

@@ -1684,7 +1684,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 5.0
 
 // X and Y axis travel speed between probes.

config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h

@@ -1700,7 +1700,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h

@@ -1703,7 +1703,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -1692,7 +1692,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/Velleman/K8800/Configuration.h

@@ -1718,7 +1718,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 15
 
 #define HOMING_FEEDRATE_Z  (100*60)

config/examples/delta/generic/Configuration.h

@@ -1691,7 +1691,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/kossel_clear/Configuration.h

@@ -1692,7 +1692,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 1
 
 // X and Y axis travel speed between probes.

config/examples/delta/kossel_mini/Configuration.h

@@ -1693,7 +1693,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/kossel_pro/Configuration.h

@@ -1711,7 +1711,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.

config/examples/delta/kossel_xl/Configuration.h

@@ -1697,7 +1697,8 @@
 
 //#define PROBE_WAKEUP_TIME_MS  30    // (ms) Time for the probe to wake up
 
-// Most probes should stay away from the edges of the bed, but// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+// Most probes should stay away from the edges of the bed, but
+// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
 // X and Y axis travel speed between probes.