📝 Update Malyan README download link (#893)

This commit is contained in:
Keith Bennett 2023-02-13 22:23:02 -08:00 committed by Scott Lahteine
parent e6c3e84c19
commit d6a6881abf
2 changed files with 2 additions and 2 deletions

View file

@ -17,7 +17,7 @@ guide you through the configuration and compilation.
- If you own a M200 V1 or early run (black V2), choose **Malyan M200 V1**.
- If you own a M200 V2 later run (white/black) or V3 (Pro), choose **Malyan M200 V2** (The V2 and V3 both share an STM32F070 MCU). Note that the V3 pinout is not complete (autolevel doesn't work as of this writing).
8. From the **Tools** menu, choose **USB Support** > **CDC No Generic Serial**.
9. Download the latest Marlin source (from the [bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x) branch) and unzip it.
9. Download the [latest Marlin source](https://marlinfw.org/meta/download/) and unzip it.
10. Look in the `Marlin` subdirectory for the `Configuration.h` and `Configuration_adv.h` files. Replace these files with the configurations in the `config\examples\Malyan\M200` folder.
11. If you have an early-run V2, the steps-per-mm are roughly half. Consult the [mpminipro.com wiki](https://mpminipro.com/) for the steps that apply to your unit. Modify `Configuration.h`.
12. Inverting Axis. There's no pattern to axes will need to be inverted. The only way to know is to test your particular printer. If you *do* know, go ahead and invert the correct axes.

View file

@ -15,7 +15,7 @@ guide you through the configuration and compilation.
6. Open the **Tools** > **Board** submenu, scroll all the way down, and select **3D Printer Boards**.
7. From the **Tools** menu, select a board part number **Malyan M300**:
8. From the **Tools** menu, choose **USB Support** > **CDC No Generic Serial**.
9. Download the latest Marlin source (from the [bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x) branch) and unzip it.
9. Download the [latest Marlin source](https://marlinfw.org/meta/download/) and unzip it.
10. Look in the `Marlin` subdirectory for the `Configuration.h` and `Configuration_adv.h` files. Replace these files with the configurations in the `config\examples\Malyan\M300` folder.
11. Open the `Marlin/Marlin.ino` file in Arduino IDE.
12. From the **Sketch** menu, select **File** > **Export Compiled Binary**.