diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 234b2c5191..ee4dcc6a86 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 6ea8da0d34..0424e02380 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index e4320a698d..d94280786a 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index a59d560a21..1124fd33b1 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 8015cf7d22..2fa599ecc8 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -3616,6 +3616,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index c1f5be4843..744d96698a 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 0d67e15ee9..a534d21271 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index a3ed47c495..ae96e308a8 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index a3ed47c495..ae96e308a8 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index ecc24e65d6..45f3a3d8d9 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 010905c120..5fe097db9e 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index f932243199..2ad79b8a1f 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 825fcbdfe2..d77fca8307 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index e434064fba..0aff28ebf1 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index b3b153d5ae..6fd4d45908 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index f1c029256d..03fa8dfded 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index bb306a3379..25f523f803 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index bb306a3379..25f523f803 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 36753c2299..6d5bd38a10 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 36753c2299..6d5bd38a10 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 5cc2573bf6..04f1a7e008 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 5cc2573bf6..04f1a7e008 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 5cc2573bf6..04f1a7e008 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index eb0a28e5ff..cde0a75659 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index f13c9122a0..d83dc904cf 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index d4d59bfb8d..70d4d5ffe5 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index f22bcee82d..eb538ff1aa 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 404ec12e8e..f39ef86f57 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index ccb17b228b..ec3c347099 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index d7f2a8b1fd..95837e2591 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 8e367a4ce4..a484fd7171 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 8e367a4ce4..a484fd7171 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 165c636438..0fbffbe432 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 234b2c5191..ee4dcc6a86 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index d318729106..4cd23e0fb8 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 3ac17e1220..33afc36244 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -3599,6 +3599,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 67e5ad4c97..e9163e8bab 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 1200125767..c026c14d67 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 71a7f7a979..bc6205482d 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index ad39e4b165..4cef6dbf6d 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -3614,6 +3614,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 71a7f7a979..bc6205482d 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 25617caa13..89587c855d 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 303329cb1e..87479da4fd 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 582c10070a..23d9ed6526 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index c145e5a3b7..86e3dbb1c7 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 7a849d2f28..8d53198a7d 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index ae50c1c258..20a90e70d5 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 2d4cb71e24..1f9af8d7e4 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index ae50c1c258..20a90e70d5 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index d33620921a..2d3c9bdde0 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 7bc1b5696c..b50123d343 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -3615,6 +3615,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index be6f69d518..2140799b52 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -3617,6 +3617,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 57d741e381..33970ee0cf 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index b79898812a..a4de843bd6 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -3609,6 +3609,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index e1967ffccd..b95c398d01 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ba83645563..073b5975b7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 25e62dd61f..939a9dbc59 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 273afabce1..e9e1517d91 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 868bf66d47..39779b73f6 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 6afc55b42d..d7ad229bd3 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index e862aef28b..b6b3c1d174 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 8729fd43a0..b52f48d111 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -3598,6 +3598,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index a6617c79e7..7b73917641 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 2322bd9262..e78d808cb3 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 09b52cd650..7edb45de13 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 57effdaeee..e1e50525d2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index daaa93fda0..9abe1d7489 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 06fe675836..939cd7477f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 344870baab..58d4877547 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 7eb5900291..a3db35c5e7 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 147d9bf3de..32673f766a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 6e7a989b4b..ebe2ec33c1 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 81b5a9d1c8..d9994e6e44 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 422293d71b..aa6832407b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index e410fe3130..6a3a49f65d 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index cad64abb96..94d88411bb 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index fbce955ef3..e011dc43d0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 7d592e7feb..bbe014ca07 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index da4fe314df..c0e308fca5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 639ac536ac..a9ff557d3b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index da4fe314df..c0e308fca5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 7fe7c2141f..4a024d0c2e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index da5aa7ea0e..1040a3956c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cc252d3bde..63b5d9cea1 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 601de1b699..6b64d72361 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 948e8b0f4d..2ea2a60a3b 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 083bee97de..a14573142a 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 63d8b71e90..2346f3f530 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 7ebdcd4cb4..64f788d89d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 7ebdcd4cb4..64f788d89d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 7ebdcd4cb4..64f788d89d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 7ebdcd4cb4..64f788d89d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 2ed6e95e06..6980e450d5 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 8defb76869..f4875e1be8 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index bd1c70b31d..a59edcf9c8 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 63817f770a..8fb97e7ec4 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 237e2ded85..51f004479b 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 1a470b5b92..5e037f540e 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 64be20eda3..e7aa1792e9 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 2c6b1e46a9..4d1df0dcc8 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 98be31f1a2..61cc16220d 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index dcba2435f5..a3d1443a30 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 5828528c0b..d5bb857003 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index af7a301386..a773f6c098 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 740436873b..ab503fe67e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index c1517f1809..cefb1020d3 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 530f802546..1f987dba04 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 2c6b1e46a9..4d1df0dcc8 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 98be31f1a2..61cc16220d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cc252d3bde..63b5d9cea1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7709d5357c..81093f84c3 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 699656faac..9dc0173b01 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 150836fb8d..121130664b 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 1829b2c509..10b20d8495 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 5f259fa98e..f6dd843ba0 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 642771a0a4..8f28a240f4 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 07d26738ae..2f6b98d693 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ #define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 5cc636f5de..3abc761db9 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 14f62ef229..6c1baf5ffd 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -3612,6 +3612,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index b487bd3142..af9a1e4972 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -3612,6 +3612,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 808521c91b..d8d9f715fb 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index f708e3281d..d925845ddc 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 2b83b56fc8..427a2da8de 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 8db29d0677..d97ba30b2c 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 8db29d0677..d97ba30b2c 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 503db9490b..76b574b1cc 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 0feb95ff46..e0008dc1fd 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index efd47da78c..52486446b7 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index ea0e1513d4..8c3f0be362 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -3609,6 +3609,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index 234b2c5191..ee4dcc6a86 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index f8ad85b393..a10879da3d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index b4d19761db..145b784f2b 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 56ef771658..1ecf7a882a 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 27f67e671e..1da37d5221 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index f2b8da4315..9313fc9354 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 221d6cf2e4..cc0dee77b9 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index c422bcf4a2..54e62d7cb2 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index c422bcf4a2..54e62d7cb2 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index f2b8da4315..9313fc9354 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index c422bcf4a2..54e62d7cb2 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index c422bcf4a2..54e62d7cb2 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index a96c70db14..6bb44a2bca 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index a96c70db14..6bb44a2bca 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index a96c70db14..6bb44a2bca 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 49c8f67361..9f6bcb853a 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 49c8f67361..9f6bcb853a 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 49c8f67361..9f6bcb853a 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 61008aa5e3..09ad0a33e6 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 2b83b56fc8..427a2da8de 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 49c8f67361..9f6bcb853a 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 61008aa5e3..09ad0a33e6 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 61a22a0e58..fa81db8cb5 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 2b83b56fc8..427a2da8de 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 05a2c9a950..bf7f478dab 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index e0bd1183a7..05c1de640f 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index f2b8da4315..9313fc9354 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index f2b8da4315..9313fc9354 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index f6fee09600..e000e3f90b 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index 485d2859fb..590575aa78 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 291259dc1b..296074d19f 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index a596217e4c..93bda3fed0 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 9e3f742807..ccac889972 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -3611,6 +3611,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 023819bd05..47512abd46 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 9e3f742807..ccac889972 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -3611,6 +3611,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 00f607205f..95d37c32d3 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 33f5185be7..8a39881f0d 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index bb306a3379..25f523f803 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index e551dc494f..ac70382bf4 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 1ac44dd57c..10dbd33017 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 72a78d2e90..06ce2b0d8e 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -3600,6 +3600,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 0f8acf16f3..4781b4314b 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 686d79c666..2a6dc25ac1 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index b66a993380..6b0a807d5d 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 20f0c2e87d..d1d11024f4 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 234b2c5191..ee4dcc6a86 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index b09c043fc8..8336c33f79 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 26562e01cf..519f2fc85b 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index c4f97e7c08..94569f6a28 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 89128725f7..ef93f1c5e3 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index a6c1df0972..abc983d376 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index f3c9dd0832..4d3489eb1d 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -3587,6 +3587,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 31595abb6b..e0f41e5811 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -3605,6 +3605,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 1e32e421e7..fe08fc164f 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index ecc24e65d6..45f3a3d8d9 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 5af7ee7ef7..412463c68d 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index fa26f323e2..2fdfcfbf5a 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index fa26f323e2..2fdfcfbf5a 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index fa26f323e2..2fdfcfbf5a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 9c8da86809..b9a955ff6c 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 95d221c7f8..988ae26110 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -3603,6 +3603,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index eeafafc4f6..b74e8c69e3 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -3603,6 +3603,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 9ef9970b70..3a597d3f62 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 1d2f8c43ec..b107e316bc 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index a1487a1316..00e360472c 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ #define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index c371abb08c..2d8e85bf75 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index deb8e2f56a..f1bef43bf9 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 674444516d..c9dd8d0bb5 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -3603,6 +3603,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 0efb762f8e..6c0dc2bdb1 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -3603,6 +3603,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 41302c2b04..b34e91e8a6 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 3d999acaac..f08867f62e 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 1bf5b9e803..82b3c57fa8 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 19b27ff272..17d21978c4 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 851aa204b1..b1efd2bcb9 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index dc05c8414a..532d2bd3ca 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index dc05c8414a..532d2bd3ca 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 4d6a31d149..c7c71a7777 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 66f3f8ba8e..8fcd8be72a 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 07b2b8b79b..789f4a059a 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index a7acbd7344..4552443b00 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index e216b3b2d4..5681199879 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 6f3d682d9c..530db77dcd 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -3610,6 +3610,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 5a88dbc645..c38a6eeb34 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -3607,6 +3607,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 6b69042efa..740d1cf9e9 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 6b69042efa..740d1cf9e9 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 6b69042efa..740d1cf9e9 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 7a521a6faf..882680177f 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -3613,6 +3613,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 56788373f5..6f5293ec63 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 9caee24756..f3564057cf 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 51c744854a..03e9f07d48 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index bf0320e781..44421248f4 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index fff251433c..e2d898a5af 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index d9966024d0..38015eb13d 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index cf7f76210e..0d2564b677 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index cdd5ff3859..2cb2aed5c5 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -3619,6 +3619,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index ab51df1a1f..e5de621d60 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index ab51df1a1f..e5de621d60 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 2d7fc2e8d6..78ac07fa03 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index afc5ff4654..e1b0a0b8a0 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 5638697eb9..65d90a1c9e 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index da7a86ba54..dc969cb476 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 05c10d891c..d821cc73e4 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 234b2c5191..ee4dcc6a86 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index bb9204c464..8d703abc4e 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index e5754fc29c..2a3b0b1e12 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index c748fe7344..f07bef0730 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index a8ea418827..a4a9a58bee 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -3609,6 +3609,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 3acecb60c4..5f29f9daef 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 151e9126ba..260eb91025 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -3609,6 +3609,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index a20ee4ce3a..3692229215 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index a20ee4ce3a..3692229215 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 551b6e300c..81ee88866f 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 78b4bb45ee..5958b3ecdc 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 58add33672..fe87eff859 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -3609,6 +3609,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index b8ac7418a6..2f5f3a3575 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index b8ac7418a6..2f5f3a3575 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index e2522fe8db..ae11ff613e 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index f0d37ce87d..743e3673e1 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 18c02e2c32..54ae338df0 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 18c02e2c32..54ae338df0 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 18c02e2c32..54ae338df0 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 14368c43cb..0fa40f2dfd 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 1aa9fba226..b4690d85f6 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 849a1b6685..4bdb3d3b78 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 20feec6f79..c23f4d59c5 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 6646c11fdb..95eeb02a78 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index e2522fe8db..ae11ff613e 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3803166979..20bb472774 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 6c80fe885e..b84d470d4d 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -3608,6 +3608,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 2dee3ce876..2b706e4759 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 5fb7616060..94c6c532fb 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index a7f51c3904..d5f7103c8f 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */ diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index e46338655b..5bc60d0ee4 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -3606,6 +3606,14 @@ */ //#define CNC_COORDINATE_SYSTEMS +/** + * CNC Drilling Cycle - UNDER DEVELOPMENT + * + * Enables G81 to perform a drilling cycle. + * Currently only supports a single cycle, no G-code chaining. + */ +//#define CNC_DRILLING_CYCLE + /** * Auto-report temperatures with M155 S */