From d64c8bb724fdaa95e070edd39b19d580c1ae9dfb Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 29 Sep 2023 23:21:50 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Misc.=20sections?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/default/Configuration_adv.h | 23 +++++++++++++++---- .../3DFabXYZ/Migbot/Configuration_adv.h | 23 +++++++++++++++---- .../ADIMLab/Gantry v1/Configuration_adv.h | 23 +++++++++++++++---- .../ADIMLab/Gantry v2/Configuration_adv.h | 23 +++++++++++++++---- .../Alfawise/U20-bltouch/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Alfawise/U20/Configuration_adv.h | 23 +++++++++++++++---- .../AliExpress/CL-260/Configuration_adv.h | 23 +++++++++++++++---- .../AliExpress/UM2pExt/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/A2/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Anet/A2plus/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/A6/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/A8/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Anet/A8plus/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/A9/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/E10/Configuration_adv.h | 23 +++++++++++++++---- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 23 +++++++++++++++---- .../Anet/E16/Stock/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/ET4+/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Anet/ET4-Pro/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/ET4/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/ET4X/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Anet/ET5-Pro/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/ET5/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Anet/ET5X/Configuration_adv.h | 23 +++++++++++++++---- .../AnyCubic/Chiron/Configuration_adv.h | 23 +++++++++++++++---- .../Anycubic V1/Configuration_adv.h | 23 +++++++++++++++---- .../Mega Zero/Anycubic V1/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../AnyCubic/Vyper/Configuration_adv.h | 23 +++++++++++++++---- .../Trigorilla AVR/Configuration_adv.h | 23 +++++++++++++++---- .../Trigorilla Pro STM32/Configuration_adv.h | 23 +++++++++++++++---- .../examples/AnyCubic/i3/Configuration_adv.h | 23 +++++++++++++++---- config/examples/ArmEd/Configuration_adv.h | 23 +++++++++++++++---- .../Artillery/Genius Pro/Configuration_adv.h | 23 +++++++++++++++---- .../Genius/BLTouch/Configuration_adv.h | 23 +++++++++++++++---- .../Artillery/Genius/V1/Configuration_adv.h | 23 +++++++++++++++---- .../Artillery/Hornet/Configuration_adv.h | 23 +++++++++++++++---- .../0.9 BMG - E3D V6/Configuration_adv.h | 23 +++++++++++++++---- .../Sidewinder X1/V1/Configuration_adv.h | 23 +++++++++++++++---- .../Sidewinder X2/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Azteeg/X5GT/Configuration_adv.h | 23 +++++++++++++++---- .../BIBO/TouchX/cyclops/Configuration_adv.h | 23 +++++++++++++++---- .../BIBO/TouchX/default/Configuration_adv.h | 23 +++++++++++++++---- .../BIQU/B1 SE Plus/Configuration_adv.h | 23 +++++++++++++++---- .../examples/BIQU/B1 SE/Configuration_adv.h | 23 +++++++++++++++---- config/examples/BIQU/B1/Configuration_adv.h | 23 +++++++++++++++---- config/examples/BIQU/BX/Configuration_adv.h | 23 +++++++++++++++---- .../examples/BIQU/Hurakan/Configuration_adv.h | 23 +++++++++++++++---- .../BIQU/Thunder Standard/Configuration_adv.h | 23 +++++++++++++++---- .../examples/BQ/Hephestos/Configuration_adv.h | 23 +++++++++++++++---- .../BQ/Hephestos_2/Configuration_adv.h | 23 +++++++++++++++---- config/examples/BQ/WITBOX/Configuration_adv.h | 23 +++++++++++++++---- config/examples/CTC/A13/Configuration_adv.h | 23 +++++++++++++++---- config/examples/CTC/Bizer/Configuration_adv.h | 23 +++++++++++++++---- .../no probe/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Cartesio/Configuration_adv.h | 23 +++++++++++++++---- .../Copymaster3D/300/Configuration_adv.h | 23 +++++++++++++++---- .../Copymaster3D/400/Configuration_adv.h | 23 +++++++++++++++---- .../Copymaster3D/500/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 23 +++++++++++++++---- .../CR-10 S4/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CR-10 S5/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV2.2-BLTouch/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-10 V2/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-10 V3/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CR-10/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CR-10S/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-20 Pro/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-20/Stock/Configuration_adv.h | 23 +++++++++++++++---- .../CR-30 PrintMill/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-6 SE/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/CR-8/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV423/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-2/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-3 Max/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-3 Neo/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV422/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV427/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3 S1 Plus/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3 S1 Pro/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3 S1/STM32F1/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3 S1/STM32F4/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3 V2 Neo/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityUI/Configuration_adv.h | 23 +++++++++++++++---- .../MarlinUI/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityUI/Configuration_adv.h | 23 +++++++++++++++---- .../MarlinUI/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityUI/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV422/MarlinUI/Configuration_adv.h | 23 +++++++++++++++---- .../BigTreeTech E3 RRF/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../BigTreeTech SKR 1.4/Configuration_adv.h | 23 +++++++++++++++---- .../2-into-1 Hotend/Configuration_adv.h | 23 +++++++++++++++---- .../Dual Z/Configuration_adv.h | 23 +++++++++++++++---- .../Single Extruder/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3/CrealityV422/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3/CrealityV427/Configuration_adv.h | 23 +++++++++++++++---- .../BLTouch/Configuration_adv.h | 23 +++++++++++++++---- .../base/Configuration_adv.h | 23 +++++++++++++++---- .../FYSETC Cheetah 2.0/Configuration_adv.h | 23 +++++++++++++++---- .../BLTouch/Configuration_adv.h | 23 +++++++++++++++---- .../FYSETC Cheetah/base/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3/MEEB-3DP/Configuration_adv.h | 23 +++++++++++++++---- .../MKS Robin E3/V1.0/Configuration_adv.h | 23 +++++++++++++++---- .../MKS Robin E3/V1.1/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 23 +++++++++++++++---- .../TH3D EZBoard Lite V2/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-4/Configuration_adv.h | 23 +++++++++++++++---- .../BigTreeTech SKR 3/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV422/Configuration_adv.h | 23 +++++++++++++++---- .../CrealityV427/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-5 S1/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Ender-5/CrealityV1/Configuration_adv.h | 23 +++++++++++++++---- .../Ender-5/CrealityV427/Configuration_adv.h | 23 +++++++++++++++---- .../Creality/Ender-6/Configuration_adv.h | 23 +++++++++++++++---- .../Dagoma/Disco Ultimate/Configuration_adv.h | 23 +++++++++++++++---- .../Daycom/3DP-100/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../EasyThreeD/ET4000PLUS/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Einstart-S/Configuration_adv.h | 23 +++++++++++++++---- .../Elegoo/Neptune 2/Configuration_adv.h | 23 +++++++++++++++---- .../Eryone/Thinker SE/Configuration_adv.h | 23 +++++++++++++++---- .../Eryone/Thinker V2/Configuration_adv.h | 23 +++++++++++++++---- .../FYSETC/AIO_II/Configuration_adv.h | 23 +++++++++++++++---- .../examples/FYSETC/F6_13/Configuration_adv.h | 23 +++++++++++++++---- config/examples/FYSETC/S6/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Felix/DUAL/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Felix/Single/Configuration_adv.h | 23 +++++++++++++++---- .../FlashForge/Creator 2X/Configuration_adv.h | 23 +++++++++++++++---- .../FlashForge/CreatorPro/Configuration_adv.h | 23 +++++++++++++++---- .../FlyingBear/P902/Configuration_adv.h | 23 +++++++++++++++---- .../FlyingBear/P905H/Configuration_adv.h | 23 +++++++++++++++---- .../FoamCutter/generic/Configuration_adv.h | 23 +++++++++++++++---- .../FoamCutter/rcKeith/Configuration_adv.h | 23 +++++++++++++++---- .../FolgerTech/FT-5 R2/Configuration_adv.h | 23 +++++++++++++++---- .../FolgerTech/i3-2020/Configuration_adv.h | 23 +++++++++++++++---- .../Formbot/Raptor/Configuration_adv.h | 23 +++++++++++++++---- .../Formbot/T_Rex_2+/Configuration_adv.h | 23 +++++++++++++++---- .../Formbot/T_Rex_3/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Geeetech/A10/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A10D/Configuration_adv.h | 23 +++++++++++++++---- .../A10M/Stock LCD/Configuration_adv.h | 23 +++++++++++++++---- .../A10M/YHCB2004_V4.1/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A10PRO/Configuration_adv.h | 23 +++++++++++++++---- .../A10T/Stock LCD/Configuration_adv.h | 23 +++++++++++++++---- .../A10T/YHCB2004_V4.1/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Geeetech/A20/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A20M/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A20T/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Geeetech/A30/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A30M/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/A30T/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/D200/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/Duplicator5/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/E180/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/GT2560/Configuration_adv.h | 23 +++++++++++++++---- .../I3_Pro_X-GT2560/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/M201/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/MeCreator2/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/Me_creator/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/Me_ducer/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/PI3A PRO/Configuration_adv.h | 23 +++++++++++++++---- .../bltouch/Configuration_adv.h | 23 +++++++++++++++---- .../noprobe/Configuration_adv.h | 23 +++++++++++++++---- .../Prusa i3 Pro C/Configuration_adv.h | 23 +++++++++++++++---- .../Prusa i3 Pro W/Configuration_adv.h | 23 +++++++++++++++---- config/examples/HMS434/Configuration_adv.h | 23 +++++++++++++++---- .../Infitary/i3-M508/Configuration_adv.h | 23 +++++++++++++++---- .../FunmatHT 4988/Configuration_adv.h | 23 +++++++++++++++---- .../examples/JGAurora/A1/Configuration_adv.h | 23 +++++++++++++++---- .../examples/JGAurora/A3/Configuration_adv.h | 23 +++++++++++++++---- .../examples/JGAurora/A5/Configuration_adv.h | 23 +++++++++++++++---- .../examples/JGAurora/A5S/Configuration_adv.h | 23 +++++++++++++++---- .../JGAurora/Magic/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Kingroon/KP3/Configuration_adv.h | 23 +++++++++++++++---- .../Kingroon/KP3S/Configuration_adv.h | 23 +++++++++++++++---- .../Kingroon/KP3S_Pro/Configuration_adv.h | 23 +++++++++++++++---- .../Kingroon/KP5L/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Labists/ET4/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Longer/LK5/Configuration_adv.h | 23 +++++++++++++++---- .../LulzBot/Mini2/Teensy/Configuration_adv.h | 23 +++++++++++++++---- .../examples/LulzBot/TAZ4/Configuration_adv.h | 23 +++++++++++++++---- config/examples/MBot/Cube/Configuration_adv.h | 23 +++++++++++++++---- .../MakerFarm/Pegasus 12/Configuration_adv.h | 21 ++++++++++++++--- .../examples/MakerParts/Configuration_adv.h | 23 +++++++++++++++---- .../Proforge2sDual/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Malyan/M150/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Malyan/M180/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Malyan/M200/Configuration_adv.h | 23 +++++++++++++++---- .../Micromake/C1/basic/Configuration_adv.h | 23 +++++++++++++++---- .../Micromake/C1/enhanced/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Mks/Robin/Configuration_adv.h | 23 +++++++++++++++---- .../Mks/Robin_Lite3/Configuration_adv.h | 23 +++++++++++++++---- .../Mks/Robin_Pro/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Mks/Sbase/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Modix/Big60/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Nextion/Configuration_adv.h | 23 +++++++++++++++---- .../Hadron/Sanguinololu/Configuration_adv.h | 23 +++++++++++++++---- .../Opulo/Lumen_REV3/Configuration_adv.h | 23 +++++++++++++++---- .../Opulo/Lumen_REV4/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Ortur 4/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Polargraph/Configuration_adv.h | 23 +++++++++++++++---- .../PrintrboardG2/Configuration_adv.h | 23 +++++++++++++++---- .../Simple Metal RevD/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Prusa/MK3/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../examples/Qidi/Qidi 1/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Raiscube/A8r/Configuration_adv.h | 23 +++++++++++++++---- .../RapideLite/RL200/Configuration_adv.h | 23 +++++++++++++++---- .../Renkforce/RF100/Configuration_adv.h | 23 +++++++++++++++---- .../Renkforce/RF100XL/Configuration_adv.h | 23 +++++++++++++++---- .../Renkforce/RF100v2/Configuration_adv.h | 23 +++++++++++++++---- .../RepRapPro/Huxley/Configuration_adv.h | 23 +++++++++++++++---- .../Megatronics/Configuration_adv.h | 23 +++++++++++++++---- .../Minitronics20/CNC/Configuration_adv.h | 23 +++++++++++++++---- config/examples/RigidBot/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Robo3D/R1+/Configuration_adv.h | 23 +++++++++++++++---- .../SCARA/MP_SCARA/Configuration_adv.h | 23 +++++++++++++++---- .../examples/SCARA/Morgan/Configuration_adv.h | 23 +++++++++++++++---- .../Black_STM32F407VET6/Configuration_adv.h | 23 +++++++++++++++---- .../STM32/STM32F103RE/Configuration_adv.h | 23 +++++++++++++++---- .../Simax/Mi-M200/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Simulator/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../SV-01/CrealityV22/Configuration_adv.h | 23 +++++++++++++++---- .../SV-01/CrealityV221/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Sovol/SV-02/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Sovol/SV-03/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Sunlu/S8/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Sunlu/T3/Configuration_adv.h | 23 +++++++++++++++---- .../TPARA/AXEL_TPARA/Configuration_adv.h | 23 +++++++++++++++---- .../Tevo/Michelangelo/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Tevo/Nereus/Configuration_adv.h | 23 +++++++++++++++---- .../MKS Gen_L/Configuration_adv.h | 23 +++++++++++++++---- .../MKS SGen_L/Configuration_adv.h | 23 +++++++++++++++---- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 23 +++++++++++++++---- .../V2 (MKS Gen_L)/Configuration_adv.h | 23 +++++++++++++++---- .../Ditto Pro/RAMPS 1.4/Configuration_adv.h | 23 +++++++++++++++---- config/examples/TinyBoy2/Configuration_adv.h | 23 +++++++++++++++---- .../CXY-v6-191017 board/Configuration_adv.h | 23 +++++++++++++++---- config/examples/Tronxy/X1/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Tronxy/X3A/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../examples/Tronxy/X5S/Configuration_adv.h | 23 +++++++++++++++---- .../Tronxy/X5SA-2E/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Tronxy/X5SA/Configuration_adv.h | 23 +++++++++++++++---- .../examples/Tronxy/XY100/Configuration_adv.h | 23 +++++++++++++++---- .../Tronxy/XY2-Pro/Configuration_adv.h | 23 +++++++++++++++---- .../Two Trees/BlueR Plus/Configuration_adv.h | 23 +++++++++++++++---- .../BlueR/BlueR V1/Configuration_adv.h | 23 +++++++++++++++---- .../BlueR/BlueR V2/Configuration_adv.h | 23 +++++++++++++++---- .../BlueR/BlueR V3/Configuration_adv.h | 23 +++++++++++++++---- .../Sapphire Plus V2.1/Configuration_adv.h | 23 +++++++++++++++---- .../Sapphire Plus V2/Configuration_adv.h | 23 +++++++++++++++---- .../Sapphire Pro/Configuration_adv.h | 23 +++++++++++++++---- .../UltiMachine/Archim1/Configuration_adv.h | 23 +++++++++++++++---- .../UltiMachine/Archim2/Configuration_adv.h | 23 +++++++++++++++---- .../Ultimaker 2+/Configuration_adv.h | 23 +++++++++++++++---- .../Ultimaker/Ultimaker 2/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../examples/VORONDesign/Configuration_adv.h | 23 +++++++++++++++---- .../K8200 Upgraded/Configuration_adv.h | 23 +++++++++++++++---- .../Velleman/K8200/Configuration_adv.h | 23 +++++++++++++++---- .../K8400/Dual-head/Configuration_adv.h | 23 +++++++++++++++---- .../K8400/Single-head/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../WASP/PowerWASP/Configuration_adv.h | 23 +++++++++++++++---- .../Wanhao/Duplicator 4S/Configuration_adv.h | 23 +++++++++++++++---- .../Wanhao/Duplicator 6/Configuration_adv.h | 23 +++++++++++++++---- .../Duplicator i3 2.1/Configuration_adv.h | 23 +++++++++++++++---- .../Duplicator i3 Mini/Configuration_adv.h | 23 +++++++++++++++---- .../Duplicator i3 Plus/Configuration_adv.h | 23 +++++++++++++++---- .../Weedo/Tina2/V2/Configuration_adv.h | 23 +++++++++++++++---- .../Weedo/Tina2/V3/Configuration_adv.h | 23 +++++++++++++++---- .../Weistek/wt150/Configuration_adv.h | 23 +++++++++++++++---- .../Zonestar/P802M/Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Configuration_adv.h | 23 +++++++++++++++---- .../Kossel Linear Plus/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Anycubic/Kossel/Configuration_adv.h | 23 +++++++++++++++---- .../Anycubic/Predator/Configuration_adv.h | 23 +++++++++++++++---- .../Dreammaker/Overlord/Configuration_adv.h | 23 +++++++++++++++---- .../Overlord_Pro/Configuration_adv.h | 23 +++++++++++++++---- .../FLSUN/Q5-nano_v1/Configuration_adv.h | 23 +++++++++++++++---- .../FLSUN/Q5-nano_v2/Configuration_adv.h | 23 +++++++++++++++---- .../delta/FLSUN/QQ-S/Configuration_adv.h | 23 +++++++++++++++---- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 23 +++++++++++++++---- .../FLSUN/auto_calibrate/Configuration_adv.h | 23 +++++++++++++++---- .../delta/FLSUN/kossel/Configuration_adv.h | 23 +++++++++++++++---- .../FLSUN/kossel_mini/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Geeetech/G2/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Geeetech/G2Pro/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Geeetech/G2S/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Geeetech/G2SPro/Configuration_adv.h | 23 +++++++++++++++---- .../Geeetech/Rostock 301/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Hatchbox_Alpha/Configuration_adv.h | 23 +++++++++++++++---- .../delta/MKS/SBASE/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Malyan M300/Configuration_adv.h | 23 +++++++++++++++---- .../Tevo Little Monster/Configuration_adv.h | 23 +++++++++++++++---- .../delta/Velleman/K8800/Configuration_adv.h | 23 +++++++++++++++---- .../delta/generic/Configuration_adv.h | 23 +++++++++++++++---- .../delta/kossel_clear/Configuration_adv.h | 23 +++++++++++++++---- .../delta/kossel_mini/Configuration_adv.h | 23 +++++++++++++++---- .../delta/kossel_pro/Configuration_adv.h | 23 +++++++++++++++---- .../delta/kossel_xl/Configuration_adv.h | 23 +++++++++++++++---- .../gCreate/gMax1.5+/Configuration_adv.h | 23 +++++++++++++++---- .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 23 +++++++++++++++---- .../RAMPS 5 LINEAR_AXES/Configuration_adv.h | 23 +++++++++++++++---- config/examples/makibox/Configuration_adv.h | 23 +++++++++++++++---- .../tvrrug/Round2/Configuration_adv.h | 23 +++++++++++++++---- 350 files changed, 6649 insertions(+), 1399 deletions(-) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 8ef77f0907..66151ededc 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 0fa6af042f..cc0ed1e3c6 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 0a1f47c0bb..0212f5864d 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 3bfb9f8d68..2282c8a501 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2378,6 +2385,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2495,6 +2504,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2550,7 +2561,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2670,6 +2681,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2704,6 +2717,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 255f560c9e..eebca2a89d 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 73abc9cf1c..3c7496cefb 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 2a42c6649b..c2e0e74c8c 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 2a42c6649b..c2e0e74c8c 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 52a5e4b04d..6b517bae29 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 5920fe0980..e5485f4365 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 7fa6e45723..2d9857f1ca 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 762312ccc7..a65ec0da48 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 87164823f6..b1a57fc711 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index ff8af09a44..0495464e17 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 21caf93b67..eb8eabdba6 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index cc3c9bce45..c0f16ca2ea 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index cc3c9bce45..c0f16ca2ea 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index a5dcb8d683..17c498430e 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index a5dcb8d683..17c498430e 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 5c8f536d23..307d91fc91 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 5c8f536d23..307d91fc91 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 5c8f536d23..307d91fc91 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 1f86060917..c91aec1995 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 9a5ea3f184..d8417302c1 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 613334b3dc..0356959eb8 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 05561de1e9..03159f4878 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 6cfb834fed..2014b903ef 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index a718844eee..1e3ed4326a 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 9490e08496..5dccd288c8 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 8773938cd9..2e0daa875f 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index dd6db8d2e3..614c734da1 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -569,6 +569,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -672,8 +674,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -750,6 +750,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -772,7 +773,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -789,6 +790,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -838,6 +841,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -909,6 +914,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2373,6 +2380,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2490,6 +2499,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2545,7 +2556,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2665,6 +2676,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2699,6 +2712,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index b46f95563d..413d1235b3 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 1de4e10aa0..45c67d330a 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 89c6269f0d..0fca0c5b08 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 92b1a52b88..8fa30286be 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 96f7770438..00081f657c 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 89c6269f0d..0fca0c5b08 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 02759bc6b2..47cc098343 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index ed7fef0b0d..0fbfc19958 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 44c3488640..48df748a24 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2365,6 +2372,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2482,6 +2491,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2537,7 +2548,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2657,6 +2668,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2691,6 +2704,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 455978e7c5..8162c34752 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 79308fbca0..c2295f7e03 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 1d845362dc..3c8bb74731 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 4b8c5d000e..ee244fccfa 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 7223851952..32fcf113a7 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 766ea3f109..f3d6b0b85f 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index b6cdbadd3d..da3f43edab 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index a1e4f1bd86..3fe8215d8f 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2376,6 +2383,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2493,6 +2502,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2548,7 +2559,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2668,6 +2679,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2702,6 +2715,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index b6cdbadd3d..da3f43edab 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index b78d1ac164..1c4eda80a6 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 5c3144c2ad..2817e28471 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 4305d4cfda..63b2911ced 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 729f4b51b9..a140f9d319 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 7121225796..76b15604e4 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 6332fafe0c..1bd5ebd708 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 60edfc4f39..c254b8d06f 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -666,8 +668,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -744,6 +744,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -766,7 +767,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -783,6 +784,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -832,6 +835,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -903,6 +908,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2367,6 +2374,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2484,6 +2493,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2539,7 +2550,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2659,6 +2670,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2693,6 +2706,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index bd1e1de25a..89fe64345a 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 8bbbb0825b..b7901c002a 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 0be6136e44..299a12f2bb 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index bd1e1de25a..89fe64345a 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index 7c1f3c53f4..7971ff2137 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 7891a1fa3b..8bbf0d880c 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2373,6 +2380,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2490,6 +2499,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2545,7 +2556,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2665,6 +2676,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2699,6 +2712,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index d1712dd32a..65e687e1c4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2375,6 +2382,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2492,6 +2501,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2547,7 +2558,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2667,6 +2678,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2701,6 +2714,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f0aa965aca..b81e1901b7 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 39a653fc1c..9489cc7907 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 7ed90ad451..0d479911fd 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 2c0ba65bf8..495e4764b0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index b56cfe3cbe..a432673a77 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f0aa965aca..b81e1901b7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 06c8f52725..cc485f2d61 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 3063efcc17..84b4ab1f19 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index c4c4219a04..3dcd9008a8 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index af9ad085c8..3cc6454862 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index af9ad085c8..3cc6454862 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 5468cdec71..f2c1cd2181 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 7ba8de4f1e..0da47a0a34 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index ca3d4497d7..ea2117c432 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index a1764b61fd..c8567583fc 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index ada9c2a15b..97ca6e9a74 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 18dd3a25df..78c75819de 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 708e8e3f07..8aceff9887 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 14edfe82e6..2e5666219e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index d92190da42..e75b6fc91b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d92190da42..e75b6fc91b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c04fb034ea..8fb745dc87 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index ceaa320f80..b1d469cc0a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 086a53f55e..4d4eba5349 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index b0f8b433b8..2327213593 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 79345324f9..d358fe6bd1 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index ee995a8a54..f1f732c8ad 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 4 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index ee995a8a54..f1f732c8ad 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 4 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index c22606121a..b084185fd2 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 8c55752a04..b806f7d560 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 4 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h index a055ae9117..2efcbb9b7c 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 0f46c0eaf2..3f38b64432 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 1487be5188..e46321f203 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index d2e2e427b2..4dd93b408f 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 10f54ed769..372d8ddcc0 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 14d5088abe..32b9872cb3 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index e660ca8044..4fe543f75e 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 1ea7fc688e..01f64de208 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index e49e54a03a..d9e097fac2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 23ed297bb7..087fb98b90 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 1271e46a53..4151d1fed8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 75fee14f2e..955aaf8c14 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 1271e46a53..4151d1fed8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index a2a9b4f71a..8d10e0ba2b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index d27306b9ad..a660ae8d8b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d27306b9ad..a660ae8d8b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index e808da9928..7ba3b081b7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 63266f8155..dbd95ad00f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 086a53f55e..4d4eba5349 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 43defaca1e..cd13d0312c 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 79345324f9..d358fe6bd1 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index d6fe667159..518908a5fd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index d6fe667159..518908a5fd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index fe1ec00c6d..2fa7d511bc 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index d6fe667159..518908a5fd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index d6fe667159..518908a5fd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 8684772573..5688c672de 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -666,8 +668,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -744,6 +744,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -766,7 +767,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -783,6 +784,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -832,6 +835,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -903,6 +908,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2367,6 +2374,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2484,6 +2493,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2539,7 +2550,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2659,6 +2670,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2693,6 +2706,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 470ac74fc3..bc59a476fb 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 67b01faf58..5191763287 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index cb76e6fc3b..e832cc535f 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index ac051bb14b..ebd49080d0 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 133171c531..d0b0cb87c5 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 4b6dd57994..180717c5ac 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h index c01d4bc868..cb6fca6e0c 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 7be63d8741..02658c59d0 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 0426334395..94d5df3e30 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 79ee8d2359..7821cfc0f1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index c9e2755c8e..9f20b4ec36 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 559578c67a..3e1cca00d2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index b87713a227..75d1980a4e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 63e83f60be..3c9cacb12f 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 1ff8d34a82..ac71add31f 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -747,6 +747,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -769,7 +770,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -786,6 +787,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -835,6 +838,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -906,6 +911,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 7be63d8741..02658c59d0 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 6689276477..321f227e34 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 59b9c806ec..5a2c86521c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a3e7b1531e..b2b9c80888 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 1d344e6496..ebc878c27a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 88ff359d4d..f84bcc8e0b 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index be2a46d0c1..636f251747 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index a0e9e11a99..bb54d528e2 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index d826cfcd32..62a919e73f 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 7db42194d2..b30395e302 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 72e2d1edd9..a9c10ff956 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ #define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 1556486284..6a888f42be 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 2d3e890480..f9a0a84e40 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 637437a287..64c380f103 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index d21825879e..b91cb36407 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 6fb7f47b74..74a48a1088 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index d0e300abbc..dd2ddccf2a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 0fef26cc55..c6ee86138b 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index d684176dcb..80ce1e7615 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 66918fdf9c..1ee5fd6fc7 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 66918fdf9c..1ee5fd6fc7 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 89e155b7ae..bc8d0bdb37 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 3b2e957123..3cbe1d4c82 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index bc6213d0d6..c623a8c566 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 830e2c1f97..570c638e6d 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2371,6 +2378,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2488,6 +2497,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2543,7 +2554,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2663,6 +2674,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2697,6 +2710,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 8e4de11edd..9ca7d30bcd 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 8e4de11edd..9ca7d30bcd 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index c05dad2341..af6f6d8536 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index e7db367817..b9b88556ef 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 69e161aba2..6491f9bfd5 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 9706054cba..d47450cde5 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 533a05d793..82e9657640 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -771,7 +772,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -788,6 +789,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -837,6 +840,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -908,6 +913,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2372,6 +2379,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2489,6 +2498,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2544,7 +2555,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2664,6 +2675,8 @@ */ #define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2698,6 +2711,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index b264beb99e..e34dce4f33 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 47d6ed2e3b..ebf5ba03ea 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 231751e7a9..d5d6eee5c3 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 231751e7a9..d5d6eee5c3 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index b264beb99e..e34dce4f33 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 231751e7a9..d5d6eee5c3 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 231751e7a9..d5d6eee5c3 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 96a14134df..f25601835d 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 96a14134df..f25601835d 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 96a14134df..f25601835d 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index fa601d7499..0ce946efbe 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index fa601d7499..0ce946efbe 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index fa601d7499..0ce946efbe 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index a9e1a8dc69..c641050387 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index d684176dcb..80ce1e7615 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index fa601d7499..0ce946efbe 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index a9e1a8dc69..c641050387 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 9c6f5b9d79..18499428c5 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index d684176dcb..80ce1e7615 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 3b8463ff68..2c3d8ce73c 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 75f5eb687d..dc0cd2da11 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index b264beb99e..e34dce4f33 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index b264beb99e..e34dce4f33 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index e755547108..fb78c51b87 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index b36e2a3735..df938c4031 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index c326eb2fb0..803e92c8de 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -563,6 +563,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -666,8 +668,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -744,6 +744,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -766,7 +767,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -783,6 +784,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -832,6 +835,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -903,6 +908,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2367,6 +2374,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2484,6 +2493,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2539,7 +2550,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2659,6 +2670,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2693,6 +2706,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 1ba945236d..074cda8a90 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -570,6 +570,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -673,8 +675,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -751,6 +751,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -773,7 +774,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -790,6 +791,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -839,6 +842,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -910,6 +915,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index e0dadcaa35..0dd72d89e7 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 3f8ce64263..4ccb640858 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -570,6 +570,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -673,8 +675,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -751,6 +751,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -773,7 +774,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -790,6 +791,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -839,6 +842,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -910,6 +915,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 7ad545001c..c406c2d928 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index bd0015abed..092bae9089 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 39c81bc508..3f7b1b783d 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Kingroon/KP5L/Configuration_adv.h b/config/examples/Kingroon/KP5L/Configuration_adv.h index 46b7e23e6a..f298e61bfb 100644 --- a/config/examples/Kingroon/KP5L/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index cc3c9bce45..c0f16ca2ea 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index aee78b0c37..17d8214e27 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index cdadc5b76e..01c8b6aea5 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2372,6 +2379,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2489,6 +2498,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2544,7 +2555,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2664,6 +2675,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2698,6 +2711,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 6b89d5732e..fe9ad7a395 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 4d38bf022a..1567730b9f 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index c321e26475..5df277c7af 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2655,6 +2666,8 @@ */ #define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2689,6 +2702,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 82c4c1f2b1..a699cfbc2c 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 6b2a677dcf..ae260b875f 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a8acc98c0d..3b11628f3c 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 2f75352980..66b5e052fa 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -747,6 +747,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -769,7 +770,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -786,6 +787,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -835,6 +838,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -906,6 +911,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index c9e9ecbfc9..0775b3e027 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 70867f11fb..d250e62e01 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 460924ec5b..53799ba4ff 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 09a256fde0..d679b91cc7 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 0d7f0304c4..2ae1782cac 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 6800917c41..38450b8bdb 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index e86d220e74..0194863e64 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 9f94d40427..5e2c508a21 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 4b0f4e0757..f2255b599c 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2367,6 +2374,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2484,6 +2493,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2539,7 +2550,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2659,6 +2670,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2693,6 +2706,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 4fff144a14..3dc71843ac 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 8a38d0d191..53d37bdd0e 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 9588c5663b..9f05808f45 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 7139f05900..340f64a88c 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 5f92f57b03..71ac52765c 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 52a5e4b04d..6b517bae29 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index d684176dcb..80ce1e7615 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index a80d3e7182..8c87570839 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index a80d3e7182..8c87570839 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index a80d3e7182..8c87570839 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index c7a280289d..e917e5d72f 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 0b61a6b554..d46be55b05 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 3cef35ca2d..2d7b0aa3dd 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 0a464dff7c..b71e719f64 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index fb603c2275..aec20a7657 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 46700fe95f..6d5d7c862a 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 48f26d9d18..d455adf07c 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index d2ef3018a1..7ca3d57841 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 98b7cac805..14985cc476 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index c2e00e110d..2f42ecc77b 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index b6e9cd27b2..b48a9d56ea 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 50f48e7eff..4b79026a12 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index d431261c8d..9d45114387 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 1a1bdc80b0..c223613068 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index f26889d834..8262bcfc15 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index b5887f4f29..355b1953db 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 36107a40d9..0af96bf8a3 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index b30068ab08..67a45be6e4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 77bb7e4679..2725eb443f 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 6f9e9abd97..d0b0cf69c4 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index feebc981da..cc606c3a10 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 81fab7cf65..698b6c2cb7 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 81fab7cf65..698b6c2cb7 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 74dc11792b..d567262766 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 88ecc14ac7..ee611e529f 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 2cdb7677be..dc90d69bf3 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index ae3b5e1047..7675898ff9 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 0cf2ee535a..e0bff47cb8 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index 22aec31b88..9ef264aa39 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 0a0b291c03..72b8562e97 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2372,6 +2379,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2489,6 +2498,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2544,7 +2555,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2664,6 +2675,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2698,6 +2711,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 3869f9e971..7bf66b10b0 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2372,6 +2379,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2489,6 +2498,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2544,7 +2555,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2664,6 +2675,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2698,6 +2711,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 5dd4f16cef..5c994ffb2e 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 06abcd0335..b0946f2927 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2367,6 +2374,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2484,6 +2493,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2539,7 +2550,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2659,6 +2670,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2693,6 +2706,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 6e2ba05918..a53c8e350b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 6e2ba05918..a53c8e350b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 6e2ba05918..a53c8e350b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index d885871514..8e9fbc4501 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -906,6 +911,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 2cb207a904..caedf28b64 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -906,6 +911,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2374,6 +2381,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2491,6 +2500,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2546,7 +2557,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2666,6 +2677,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2700,6 +2713,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 4ed50635c1..74fa0cf5cd 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index abbd4135a0..fa67b9152d 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 98a5212b26..66bc84c6cd 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index d333bc7874..f88318de56 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 05e52b4f43..93bdfc3e03 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index dbab34b9aa..b83b7680ff 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index afd3b5a701..bafff15a02 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index fafb1c6904..c3a6223277 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2366,6 +2373,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2483,6 +2492,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2538,7 +2549,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2658,6 +2669,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2692,6 +2705,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 5e7ac180f2..0939469bec 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index c9879f162b..a11e149a58 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -577,6 +577,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -680,8 +682,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -758,6 +758,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -780,7 +781,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -797,6 +798,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -846,6 +849,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -917,6 +922,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2381,6 +2388,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2498,6 +2507,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2553,7 +2564,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2673,6 +2684,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2707,6 +2720,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 8b3856a1f9..8ce908ffbf 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -577,6 +577,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -680,8 +682,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -758,6 +758,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -780,7 +781,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -797,6 +798,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -846,6 +849,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -917,6 +922,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2381,6 +2388,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2498,6 +2507,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2553,7 +2564,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2673,6 +2684,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2707,6 +2720,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 097b8a2c85..c202c0dc45 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 097b8a2c85..c202c0dc45 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index fd0fb04b82..c8a0c93919 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index a986938a1b..3f64c82b6c 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index bbcd7022b1..b13e34a6c5 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index ab0bb68c27..f29cd91643 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 4886b6c110..ed4b5ec2c2 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index f9fc26968c..db89329e9c 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 17ee14c4ba..7125f554b6 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 17ee14c4ba..7125f554b6 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 67ad33a05a..e1797d83e1 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 543ec69989..0c8cc74414 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 5aa0c489ae..84db2278d5 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 0b9074a1bf..ef3074f557 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index ef4d2d9413..1ba04c1656 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -746,6 +746,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -768,7 +769,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -785,6 +786,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -834,6 +837,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -905,6 +910,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 6242d8ba69..6641ed35d5 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 6ce80f33ac..5875701f10 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2371,6 +2378,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2488,6 +2497,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2543,7 +2554,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2663,6 +2674,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2697,6 +2710,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 2c308558fe..0b2fad0c96 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 2c308558fe..0b2fad0c96 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index c0cf57adee..dc9749af74 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 7b4bc4b001..db64e88ee9 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index e1ceffb97c..6768ff4f13 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 3406da58c9..d1bfd38a89 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 3406da58c9..d1bfd38a89 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index ea0e28f2ee..580d8779ed 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index c028a82b52..1c587229dd 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index c028a82b52..1c587229dd 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index c028a82b52..1c587229dd 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index c028a82b52..1c587229dd 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 6e4b4faded..4104401279 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 4df1e4cb0d..37702e49a5 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 22b0295447..7b2121e1ea 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 6b90cd6ac6..119e1879c7 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 071702f941..682d490e3e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 95478ec32c..89984efbf0 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ #define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2370,6 +2377,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2487,6 +2496,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2542,7 +2553,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2662,6 +2673,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2696,6 +2709,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index ea0e28f2ee..580d8779ed 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 1120ec2737..3b1abb1d49 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index c5ce910cb5..52c91da588 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 3fa52f9feb..9293dd462e 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2369,6 +2376,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2486,6 +2495,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 1 @@ -2541,7 +2552,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2661,6 +2672,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2695,6 +2708,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 1892b69a3b..805bc1af01 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 049940ff17..0383b5af17 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 73d500a516..3c3ad371dc 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index eda5b76fac..2f640ae897 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted. diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index b18bd9ef45..c1036c437b 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -564,6 +564,8 @@ #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 +// @section fans + /** * Controller Fan * To cool down the stepper drivers and MOSFETs. @@ -667,8 +669,6 @@ //#define NUM_REDUNDANT_FANS 1 // Number of sequential fans to synchronize with Fan 0 #endif -// @section extruder - /** * Extruder cooling fans * @@ -745,6 +745,7 @@ #define FANMUX2_PIN -1 /** + * @section caselight * M355 Case Light on-off / brightness */ //#define CASE_LIGHT_ENABLE @@ -767,7 +768,7 @@ #endif #endif -// @section homing +// @section endstops // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. @@ -784,6 +785,8 @@ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 #endif +// @section idex + /** * Dual X Carriage * @@ -833,6 +836,8 @@ //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" #endif +// @section multi stepper + /** * Multi-Stepper / Multi-Endstop * @@ -904,6 +909,8 @@ //#define INVERT_E1_VS_E0_DIR // E direction signals are opposites #endif +// @section extruder + // Activate a solenoid on the active extruder with M380. Disable all with M381. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. //#define EXT_SOLENOID @@ -2368,6 +2375,8 @@ #endif +// @section probes + /** * Thermal Probe Compensation * @@ -2485,6 +2494,8 @@ #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. #endif +// @section motion + // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 @@ -2540,7 +2551,7 @@ //================================= Buffers ================================= //=========================================================================== -// @section motion +// @section gcode // The number of linear moves that can be in the planner at once. #if ALL(HAS_MEDIA, DIRECT_STEPPING) @@ -2660,6 +2671,8 @@ */ //#define EXTRA_FAN_SPEED +// @section gcode + /** * Firmware-based and LCD-controlled retract * @@ -2694,6 +2707,8 @@ #endif #endif +// @section tool change + /** * Universal tool change settings. * Applies to all types of extruders except where explicitly noted.