3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-06 22:47:35 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔥 Drop TMC26X support

Browse source 
MarlinFirmware/Marlin#26770
This commit is contained in:
Scott Lahteine 2024-05-12 12:27:41 -05:00
parent c771a5450e
commit d0425ea91f
368 changed files with 1104 additions and 2208 deletions
Download patch file Download diff file Expand all files Collapse all files

9
config/default/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/3DMatik/XL/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -2980,15 +2980,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -3002,7 +2999,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3502,7 +3499,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -2972,15 +2972,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2994,7 +2991,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3494,7 +3491,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A6/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A8/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/A9/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/E10/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/ArmEd/Configuration_adv.h
View file

@ -2975,15 +2975,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2997,7 +2994,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3497,7 +3494,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -2967,15 +2967,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2989,7 +2986,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3489,7 +3486,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.15 // Multiplied x1000 for TMC26X #define X_RSENSE 0.15
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.15 // Multiplied x1000 for TMC26X #define X_RSENSE 0.15
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -2972,15 +2972,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2994,7 +2991,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.15 // Multiplied x1000 for TMC26X #define X_RSENSE 0.15
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3494,7 +3491,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 1050 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 1050 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME 350 // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME 350 // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.15 // Multiplied x1000 for TMC26X #define X_RSENSE 0.15
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -2978,15 +2978,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -3000,7 +2997,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3500,7 +3497,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/CNC/miniRambo/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/CTC/A13/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Cartesio/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Copymaster3D/300/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Copymaster3D/400/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Copymaster3D/500/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 Max/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -2969,15 +2969,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2991,7 +2988,7 @@
#define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.1 // Multiplied x1000 for TMC26X #define X_RSENSE 0.1
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3489,7 +3486,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h
View file

@ -2973,15 +2973,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2995,7 +2992,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3495,7 +3492,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -2975,15 +2975,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2997,7 +2994,7 @@
#define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3495,7 +3492,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -2977,15 +2977,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2999,7 +2996,7 @@
#define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3497,7 +3494,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S Pro/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.0 // Multiplied x1000 for TMC26X62 #define X_RSENSE 0.062
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.0 // Multiplied x1000 for TMC26X62 #define X_RSENSE 0.062
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-20/Stock/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Neo/Configuration_adv.h
View file

@ -2971,15 +2971,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2993,7 +2990,7 @@
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3493,7 +3490,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

9
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2970,15 +2970,12 @@
* Some boards have simple jumper connections! See your board's documentation. * Some boards have simple jumper connections! See your board's documentation.
* - These drivers can also be used with Hardware Serial. * - These drivers can also be used with Hardware Serial.
* *
* The TMC26XStepper library is required for TMC26X stepper drivers.
* https://github.com/MarlinFirmware/TMC26XStepper
*
* The TMCStepper library is required for other TMC stepper drivers. * The TMCStepper library is required for other TMC stepper drivers.
* https://github.com/teemuatlut/TMCStepper * https://github.com/teemuatlut/TMCStepper
* *
* @section tmc/config * @section tmc/config
*/ */
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X #if HAS_TRINAMIC_CONFIG
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
@ -2992,7 +2989,7 @@
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.) #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X #define X_RSENSE 0.11
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis //#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
@ -3492,7 +3489,7 @@
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X #endif // HAS_TRINAMIC_CONFIG
// @section i2cbus // @section i2cbus

Some files were not shown because too many files have changed in this diff Show more