diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 5c93af375f..7066c3088e 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 673e7308c7..7d19e08bac 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 9c892bd108..2c6f7a11e4 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 360 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 360 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 6e6856973c..1cc9cc89a3 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 9d41c4a56e..10270a5fca 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 522b3dcc82..be80707986 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index de733da486..2e4b3b6850 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 4f010b29f0..c571549663 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index f611c3dc5a..31c6a4e47a 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index f611c3dc5a..31c6a4e47a 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 7f766f9b1b..e85d6ff5eb 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 1cd0cecdc4..ae3e85e8f4 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index aafccc5593..44b53fcf97 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index b58210aa40..2e0787fe43 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 80 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 1dc4aa0a30..c6df91ab09 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 80 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index b44b1b3392..a943ddfabf 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index c1f1e5a9df..e926dea9b1 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -181,28 +181,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 5697ed2d76..ab22c0d5d2 100755 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 5697ed2d76..ab22c0d5d2 100755 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index f610e2a43f..9d1ed110d9 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 07924b0a11..8065649307 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index e7f8860664..4e18e26aa4 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 4faa3c1257..865c44236f 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e7f8860664..4e18e26aa4 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h index 1f1594bde6..4f29353b33 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h index 5627506ee8..b0690449fe 100644 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 9545b354d7..dec886b4f2 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 47c672d7e6..e8d504b8ba 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 8d67ca4649..6f2d305168 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index a643e66c89..9d0968d0d7 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 600 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index c91f4495a1..8874709455 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 5a4fe0d7bf..1b1194b80c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index b33bdae95e..9461c468d9 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 9a37045f6b..b54f9112d6 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 1f5eb4281d..a69b24754f 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index 248d63a0cc..1427f3d4a7 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 06ea2d4a08..74699b8220 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index 65842d9707..43654d0dbe 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index f1986abc14..4eb1f199a4 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 4c0037faff..711be8850c 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 71a3d283d1..9ce2a58855 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 5 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 639a0f4b55..8c053ade8c 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 0d8cd6f526..65b9e22e80 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index 70c2110ffb..01b6b2186d 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index 70c2110ffb..01b6b2186d 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index 70c2110ffb..01b6b2186d 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index 70c2110ffb..01b6b2186d 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 107bac6638..6918bff700 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -169,7 +169,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 120 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 5c93af375f..7066c3088e 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 34c9509712..808e1f9780 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 34c9509712..808e1f9780 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 516a12464e..0092ecded0 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 71ed3b04cd..1142cff691 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index fc6134846e..43ab5bb09c 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 3116bc8932..06eea3ef94 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 121b03c0ad..b5c9966733 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 5948406efa..6db9ce1d0a 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 4b9a8933ca..0f42543ac9 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index e7922149eb..6b5f845160 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index e7922149eb..6b5f845160 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 8dc94e149c..0edc27570b 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 8dc94e149c..0edc27570b 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 8dc94e149c..0edc27570b 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index f03af98523..2c78408654 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 81d9adaced..ddd4bf20a0 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 5c93af375f..7066c3088e 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index f03af98523..2c78408654 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 81d9adaced..ddd4bf20a0 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 3f52c6b63e..c6bd23546e 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 5c93af375f..7066c3088e 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 5c93af375f..7066c3088e 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 03a8f1c5e6..f4aff34101 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 5948406efa..6db9ce1d0a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 5948406efa..6db9ce1d0a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index ba959997b1..cc18f1e42a 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -177,14 +177,14 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index c9bc0a54fc..6fcd292f6f 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 77967eca96..d0b56ea4ab 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -182,28 +182,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 274e4a1b17..b26de1f03b 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 77967eca96..d0b56ea4ab 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -182,28 +182,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 8773bbc556..6f270900b2 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index 5a97d0a861..1c10cddecd 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index cb0c5482ec..c99666ecef 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 207bb5d5a1..dea1e66898 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 663b7b8b08..5ede6f4263 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 865f101a35..72d448be9e 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 47f098ca59..066e37ae8a 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 3ffcc1635a..f5fef35c57 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index ca5ea31302..682610e5a4 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index ddecb0f14a..5f03b20776 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 852107b26f..96efcf8f8f 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 852107b26f..96efcf8f8f 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 852107b26f..96efcf8f8f 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index a11715c5aa..38f4218ffd 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 9697ccb301..e3c9fdf8a7 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 14ab97f9e0..a2aa8c1a6c 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 8ec3145e57..ae6f81baed 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 2ac6ebebf7..a58fbee131 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index c0213bc404..fc95c78711 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index de5dbc56c3..bf09437997 100755 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 3df830f27d..109d78e264 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index dc9f074933..530025c067 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index dc9f074933..530025c067 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 100217a889..c8486b023d 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index e2d5467e07..9a3948fc48 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index efd2eadc75..edadd3d23f 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -170,35 +170,35 @@ * below 2. */ #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 10 // Degrees Celsius + #define WATCH_TEMP_INCREASE 10 // Degrees Celsius #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 496cd35e58..5073bb55eb 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 259827e05c..833fde98b9 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index e62456d591..94c569a9f6 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 02df34fa50..52cc744c83 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 4b8f0d9134..1692ac5815 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -190,28 +190,28 @@ #if ENABLED(THERMAL_PROTECTION_BED) // K8200 has weak heaters/power supply by default, so you have to relax! // the default bed is so weak, that you can hardly go over 75°C - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 446ab23569..e6cd62e2cb 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 446ab23569..e6cd62e2cb 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index ee83399275..46e5409f40 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index f43a79b180..6353aaa701 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds Changed to 90 seconds to help prevent false thermal runaway errors (may have to increase to 120) - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds Changed to 90 seconds to help prevent false heater failed errors - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 90 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index bda000160c..3708919973 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 1711f7b105..dbd60eab69 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 68ec65dcb4..9881a06bbb 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index e22e0fcaf0..cc10af84d6 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 2b94a249a2..3829f8f2a4 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 8848fca18d..e8afbe3e8c 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 7e23c46e44..3e3c8f6f85 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 7e23c46e44..3e3c8f6f85 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 4f9966e1ff..460a06baf3 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index b9a4fa28c9..d02a7753f2 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 1609ad4bdc..7fd9a603b7 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 1609ad4bdc..7fd9a603b7 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 1609ad4bdc..7fd9a603b7 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index b507cc367e..6549686300 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 8da172c351..a624d06c97 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 100 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 84e99f163b..e7fc51ac59 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 4f9966e1ff..460a06baf3 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 800ac65aa0..5254fa0e16 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 4f9966e1ff..460a06baf3 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index d8b9874af2..a347a49375 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 0658439ea2..2cea12e810 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index dfcb029f7f..c65ec7cebd 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index fcad4ff092..c30d2e785e 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index d59e71a1b3..a4f114a383 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -177,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP)