mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-24 15:14:02 -06:00
Disco Ultimate updates (#300)
This commit is contained in:
Orel
Scott Lahteine
parent
4b5daf4ebb
commit
ce50307cc2
4 changed files with 103 additions and 43 deletions
|
|
@ -70,7 +70,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "Dagoma" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -88,7 +88,7 @@
|
|||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
|
@ -128,7 +128,7 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_DAGOMA
|
||||
#define MOTHERBOARD BOARD_DAGOMA_F5
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
|
|
@ -142,13 +142,13 @@
|
|||
|
||||
// This defines the number of extruders
|
||||
// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
|
||||
#define EXTRUDERS 1
|
||||
#define EXTRUDERS 2
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
//#define SINGLENOZZLE
|
||||
#define SINGLENOZZLE
|
||||
|
||||
// Save and restore temperature and fan speed on tool-change.
|
||||
// Set standby for the unselected tool with M104/106/109 T...
|
||||
|
|
@ -326,7 +326,7 @@
|
|||
* Enable and connect the power supply to the PS_ON_PIN.
|
||||
* Specify whether the power supply is active HIGH or active LOW.
|
||||
*/
|
||||
#define PSU_CONTROL
|
||||
//#define PSU_CONTROL
|
||||
//#define PSU_NAME "Power Supply"
|
||||
|
||||
#if ENABLED(PSU_CONTROL)
|
||||
|
|
@ -794,9 +794,9 @@
|
|||
*/
|
||||
//#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 20
|
||||
#define DEFAULT_YJERK 20
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
|
||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||
|
||||
|
|
@ -816,7 +816,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -829,7 +829,7 @@
|
|||
*
|
||||
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
|
||||
*/
|
||||
//#define S_CURVE_ACCELERATION
|
||||
#define S_CURVE_ACCELERATION
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
|
|
@ -990,7 +990,7 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 21, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 21, -1.5 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
|
|
@ -1033,7 +1033,7 @@
|
|||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 10 // Z Clearance between multiple probes
|
||||
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
|
@ -1098,7 +1098,7 @@
|
|||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E1_DIR false
|
||||
#define INVERT_E1_DIR true
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
#define INVERT_E4_DIR false
|
||||
|
|
@ -1176,7 +1176,7 @@
|
|||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
|
|
@ -1264,8 +1264,8 @@
|
|||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
// split up moves into short segments like a Delta. This follows the
|
||||
// contours of the bed more closely than edge-to-edge straight moves.
|
||||
//#define SEGMENT_LEVELED_MOVES
|
||||
//#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
#define SEGMENT_LEVELED_MOVES
|
||||
#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
|
||||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
|
|
@ -1273,11 +1273,11 @@
|
|||
#define G26_MESH_VALIDATION
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.26 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_HOTEND_TEMP 190 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
||||
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
|
||||
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
|
||||
#define G26_RETRACT_MULTIPLIER 5 // G26 Q (retraction) used by default between mesh test elements.
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -1317,14 +1317,14 @@
|
|||
|
||||
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
//#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
#define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
|
|
@ -1507,9 +1507,9 @@
|
|||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_HOTEND 190
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
#define PREHEAT_1_FAN_SPEED 200 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
|
|
@ -1531,11 +1531,11 @@
|
|||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MAX_POS + 10), (Y_MAX_POS - 10), 5 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
|
||||
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 195 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
#endif
|
||||
|
||||
|
|
@ -1576,7 +1576,7 @@
|
|||
* Caveats: The ending Z should be the same as starting Z.
|
||||
* Attention: EXPERIMENTAL. G-code arguments may change.
|
||||
*/
|
||||
#define NOZZLE_CLEAN_FEATURE
|
||||
//#define NOZZLE_CLEAN_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_CLEAN_FEATURE)
|
||||
// Default number of pattern repetitions
|
||||
|
|
@ -1640,7 +1640,7 @@
|
|||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
/**
|
||||
* Password
|
||||
|
|
|
|||
|
|
@ -474,7 +474,7 @@
|
|||
* Multiple extruders can be assigned to the same pin in which case
|
||||
* the fan will turn on when any selected extruder is above the threshold.
|
||||
*/
|
||||
#define E0_AUTO_FAN_PIN -1
|
||||
#define E0_AUTO_FAN_PIN 7
|
||||
#define E1_AUTO_FAN_PIN -1
|
||||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
|
|
@ -656,9 +656,9 @@
|
|||
#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
|
||||
#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
|
||||
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
|
||||
|
|
@ -783,7 +783,7 @@
|
|||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
|
||||
|
|
@ -1011,8 +1011,8 @@
|
|||
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
|
||||
*/
|
||||
//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
|
||||
#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||
//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||
#define DAC_MOTOR_CURRENT_DEFAULT { 30, 30, 25, 30 } // Default drive percent - X, Y, Z, E axis
|
||||
|
||||
/**
|
||||
* I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
|
||||
|
|
@ -1542,8 +1542,8 @@
|
|||
#define TOUCH_UI_FIT_TEXT
|
||||
|
||||
// Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
|
||||
//#define LCD_LANGUAGE_1 en
|
||||
//#define LCD_LANGUAGE_2 fr
|
||||
#define LCD_LANGUAGE_1 en
|
||||
#define LCD_LANGUAGE_2 fr
|
||||
//#define LCD_LANGUAGE_3 de
|
||||
//#define LCD_LANGUAGE_4 es
|
||||
//#define LCD_LANGUAGE_5 it
|
||||
|
|
@ -2092,23 +2092,23 @@
|
|||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 950 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 10 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 100 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 940 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 30 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
|
|
|||
8
config/examples/Dagoma/Disco Ultimate/README.md
Normal file
8
config/examples/Dagoma/Disco Ultimate/README.md
Normal file
|
|
@ -0,0 +1,8 @@
|
|||
# Dagoma Disco Ultimate Configuration
|
||||
|
||||
## Requirements
|
||||
- Dagoma Disco Ultimate with F5 board
|
||||
- Reprap screen
|
||||
|
||||
## TODO
|
||||
The pause button feature is not yet implemented but its behavior can be replicated with the screen.
|
||||
52
config/examples/Dagoma/Disco Ultimate/_Bootscreen.h
Normal file
52
config/examples/Dagoma/Disco Ultimate/_Bootscreen.h
Normal file
|
|
@ -0,0 +1,52 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 112
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B01111111,B11100000,B00000001,B11100000,B00000001,B11111111,B10000000,B00111111,B11100000,B00111100,B00000000,B11110000,B00001111,B00000000,
|
||||
B01111111,B11111000,B00000011,B11110000,B00000111,B11111111,B10000000,B01111111,B11111000,B00111110,B00000001,B11110000,B00001111,B10000000,
|
||||
B01110000,B00111100,B00000011,B11110000,B00001111,B10000001,B00000000,B11110000,B00111100,B00111111,B00000011,B11110000,B00011111,B10000000,
|
||||
B01110000,B00001110,B00000111,B11111000,B00001110,B00000000,B00000001,B11100000,B00011110,B00111111,B10000111,B11110000,B00011101,B11000000,
|
||||
B01110000,B00001111,B00000111,B00111000,B00011100,B00000000,B00000001,B11000000,B00001110,B00111011,B10001111,B01110000,B00111001,B11000000,
|
||||
B01110000,B00000111,B00000111,B00111100,B00011100,B00000000,B00000011,B10000000,B00001110,B00111001,B11001110,B01110000,B00111000,B11100000,
|
||||
B01110000,B00000111,B00001110,B00011100,B00011100,B00001111,B11110011,B10000000,B00000111,B00111000,B11111100,B01110000,B01110000,B11100000,
|
||||
B01110000,B00000111,B00001110,B00011110,B00011100,B00001111,B11110011,B10000000,B00000111,B00111000,B11111000,B01110000,B01110000,B01110000,
|
||||
B01110000,B00000111,B00001100,B00001110,B00011100,B00001111,B11110011,B10000000,B00001110,B00111000,B01111000,B01110000,B11100000,B01110000,
|
||||
B01110000,B00001111,B00000100,B00001111,B00011100,B00000000,B01110001,B11000000,B00001110,B00111000,B00110000,B01110000,B11100000,B00111000,
|
||||
B01110000,B00001110,B00110000,B00000111,B00011110,B00000000,B01100001,B11000000,B00011110,B00111000,B00000000,B01110000,B11100000,B00111000,
|
||||
B01110000,B00011110,B00110000,B00000111,B10001111,B00000000,B11100000,B11100000,B00111100,B00111000,B00000000,B01110001,B11000000,B00011100,
|
||||
B01111111,B11111100,B00010011,B11111111,B10000111,B11111111,B11000000,B01111111,B11111000,B00111000,B00000000,B01110001,B11000000,B00011100,
|
||||
B01111111,B11110000,B00110011,B11111111,B11000011,B11111111,B10000000,B00111111,B11110000,B00111000,B00000000,B01110011,B10011111,B11111110,
|
||||
B01111111,B10000000,B00110011,B11111111,B11000000,B01111110,B00000000,B00001111,B11000000,B00011000,B00000000,B01100011,B10011111,B11111110
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue