3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 23:17:38 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Alfawise U20 tuneup (#377)

Browse source
This commit is contained in:
Tanguy Pruvot 2020-12-28 23:33:10 +01:00 • committed by GitHub
parent 755cfdbea1
commit cb031c2ee7
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
4 changed files with 34 additions and 25 deletions
Download patch file Download diff file Expand all files Collapse all files

14
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1055,7 +1055,7 @@
#define PROBING_MARGIN 10
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_SPEED (133*60)
#define XY_PROBE_SPEED (80*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST (7*60)
@ -1393,7 +1393,7 @@
* these options to restore the prior leveling state or to always enable
* leveling immediately after G28.
*/
//#define RESTORE_LEVELING_AFTER_G28
#define RESTORE_LEVELING_AFTER_G28
//#define ENABLE_LEVELING_AFTER_G28
/**
@ -1437,7 +1437,7 @@
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
#define G26_RETRACT_MULTIPLIER 5.0 // G26 Q (retraction) used by default between mesh test elements.
#endif
#endif
@ -1563,7 +1563,7 @@
#endif
// Homing speeds (mm/min)
#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (7*60) }
#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (6*60) }
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS
@ -1697,11 +1697,11 @@
#if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z_raise }
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
#define NOZZLE_PARK_X_ONLY // X move only is required to park
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
#define NOZZLE_PARK_XY_FEEDRATE 50 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 6 // (mm/s) Z axis feedrate (not used for delta printers)
#endif
/**

29
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -371,12 +371,12 @@
* Hotend Idle Timeout
* Prevent filament in the nozzle from charring and causing a critical jam.
*/
//#define HOTEND_IDLE_TIMEOUT
#define HOTEND_IDLE_TIMEOUT
#if ENABLED(HOTEND_IDLE_TIMEOUT)
#define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
#define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
#define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout
#define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout
#define HOTEND_IDLE_NOZZLE_TARGET 50 // (°C) Safe temperature for the nozzle after timeout
#define HOTEND_IDLE_BED_TARGET 30 // (°C) Safe temperature for the bed after timeout
#endif
// @section temperature
@ -803,7 +803,16 @@
#if ENABLED(ASSISTED_TRAMMING)
// Define positions for probe points.
#define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } }
#if defined(U20) || defined(LK1)
#define MAX_THR_X 260 // X 265 may not be reachable by a probe on the left (U20)
#define TRAMMING_POINT_XY { { 30, 30 }, { MAX_THR_X, 30 }, { MAX_THR_X, 275 }, { 30, 275 } }
#elif defined(U30) || defined(LK2) || defined(LK4)
#define MAX_THR_X 180 // X 185 may not be reachable by a probe on the left (U30)
#define TRAMMING_POINT_XY { { 30, 15 }, { MAX_THR_X, 15 }, { MAX_THR_X, 185 }, { 30, 185 } }
#else
// Please adjust for the U20+ (computed from U20 + 10cm)
#define TRAMMING_POINT_XY { { 30, 30 }, { 360, 30 }, { 360, 375 }, { 30, 375 } }
#endif
// Define position names for probe points.
#define TRAMMING_POINT_NAME_1 "Front-Left"
@ -812,10 +821,10 @@
#define TRAMMING_POINT_NAME_4 "Back-Left"
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
//#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first
#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first
//#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI)
//#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu
#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI)
#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu
//#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment
/**
@ -824,7 +833,7 @@
* M4: 40 = Clockwise, 41 = Counter-Clockwise
* M5: 50 = Clockwise, 51 = Counter-Clockwise
*/
#define TRAMMING_SCREW_THREAD 30
#define TRAMMING_SCREW_THREAD 40
#endif
@ -2148,11 +2157,11 @@
// For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
#define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
#define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading.
#define ADVANCED_PAUSE_PURGE_LENGTH 30 // (mm) Length to extrude after loading.
// Set to 0 for manual extrusion.
// Filament can be extruded repeatedly from the Filament Change menu
// until extrusion is consistent, and to purge old filament.
#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
#define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park.
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
// Filament Unload does a Retract, Delay, and Purge first:

10
config/examples/Alfawise/U20/Configuration.h
View file

@ -1057,7 +1057,7 @@
#define PROBING_MARGIN 10
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_SPEED (133*60)
#define XY_PROBE_SPEED (80*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST (7*60)
@ -1565,7 +1565,7 @@
#endif
// Homing speeds (mm/min)
#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (7*60) }
#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (6*60) }
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS
@ -1699,11 +1699,11 @@
#if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z_raise }
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
#define NOZZLE_PARK_X_ONLY // X move only is required to park
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
#define NOZZLE_PARK_XY_FEEDRATE 50 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 6 // (mm/s) Z axis feedrate (not used for delta printers)
#endif
/**

6
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -371,12 +371,12 @@
* Hotend Idle Timeout
* Prevent filament in the nozzle from charring and causing a critical jam.
*/
//#define HOTEND_IDLE_TIMEOUT
#define HOTEND_IDLE_TIMEOUT
#if ENABLED(HOTEND_IDLE_TIMEOUT)
#define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
#define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
#define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout
#define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout
#define HOTEND_IDLE_NOZZLE_TARGET 50 // (°C) Safe temperature for the nozzle after timeout
#define HOTEND_IDLE_BED_TARGET 30 // (°C) Safe temperature for the bed after timeout
#endif
// @section temperature