diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 80a4367092..add7b8f0ad 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index f0a61ea894..761e6e60e9 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4073,7 +4073,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 22929f98a1..d3f37914c6 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 3c861a394c..2d2357259c 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index f791776f73..12f57c6e72 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2084,7 +2084,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4087,7 +4087,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index d06935193a..8e60f525c0 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index caa980aab3..cd12a18722 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 13142873d6..d189011d63 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 13142873d6..d189011d63 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 1969095363..3dcb8a3066 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index e985afd64c..6c8ba54ee2 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 6f37b20a9d..c56a680cdb 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 617ed7eefd..4fba7a7ca3 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 56e5958025..ecc5710998 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index efdf158ace..8b431dbf6e 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index e862cb5bab..3832eefa9a 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index f7a4adf2d8..00d276cc45 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index f7a4adf2d8..00d276cc45 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 15918bced1..c93f8eebc7 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 15918bced1..c93f8eebc7 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 72e0471114..8549c53d1f 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 72e0471114..8549c53d1f 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 72e0471114..8549c53d1f 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 2aa3081907..47f60eff4b 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 5910c91030..a9552a5f97 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index f6ff51573f..2cd8697862 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 574e31be94..1e2e6ae437 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 91955cb5e9..10c045a890 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 5df275d863..115c347987 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -2074,8 +2074,8 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. - #define LIN_ADVANCE_K 0.8 // Unit: mm compression per 1mm/s extruder speed + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. + #define LIN_ADVANCE_K 0.8 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. //#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 6a4fe474d8..b3566f38a8 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 86e200ecdf..793d932688 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2079,7 +2079,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4082,7 +4082,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 59f184cab4..88f12f0dc0 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 0ee112c6be..1bc6875159 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index c87b98d661..4cd0a41d58 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 69ac2dd15c..e857611eba 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index e794a428f0..8b02a23de9 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.2 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index c87b98d661..4cd0a41d58 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index f5ac3f6b1a..f02069b024 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 8ccecdf52a..e951379445 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 5004395ca5..20745d70c4 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 6f285d28b0..755776bdd8 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index c9f6ad056c..1d12385c5f 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 388052c502..4586aeaa29 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 1b2cd66746..d9b9c54a1a 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index d2451d7994..346b2e47e0 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 273621ae27..1f45db7712 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 1c2f4db2e5..4a7d1c9ba3 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2082,7 +2082,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4085,7 +4085,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 273621ae27..1f45db7712 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 3f7202d385..1eb4a09298 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 754c150403..70e0083689 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 42cb78a465..4c41555cbd 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9e6f173b23..51142c8dd0 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 354636da21..8a6b849c50 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index ad6b461dbb..93994a6890 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 3450798149..aa04445055 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 2a4de1092b..91a8b01535 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index 215ac5cb51..8cb29bb4ac 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2057,7 +2057,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4060,7 +4060,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 3450798149..aa04445055 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index b53fd5466d..18ffecfd74 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index ed7a2150fd..8a954c79aa 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2078,7 +2078,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4083,7 +4083,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index d172fd8f06..68deb6dbd5 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4085,7 +4085,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2a09444dd2..c9dd2a8e08 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 286f8f950c..5af77f2542 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4080,7 +4080,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index dfdba672c4..be83635e13 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index ac9a317ec4..226e4f1fb4 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2cf23fdbac..d19611b9a7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index f2b3e9137e..691099a7f3 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index f84210a101..e42f3fdb63 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index d80a9ae727..9fb97c5f0a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index b1193472a0..af479fb4c1 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index c0e6e785af..f36a2fe3ae 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 48f642398c..456c25cae1 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4064,7 +4064,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index defd136745..0ac4362616 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 1dab746b2a..6e1092e7da 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 5ae082f0f4..b6180ebb48 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index d5f5688908..8818b7e090 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 0ae5476bc3..0cd193a53b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.56 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 2598770361..cf527241e7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 2598770361..cf527241e7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 62e81c02a9..49fef569d4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 7b7e9932c2..c30c9a057a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 6dd8bd3927..446c2f5820 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index e8d092522a..a62959c589 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index efdd071e02..cc5a3dc9ba 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 9b51dff0c8..f1a593afcb 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2070,7 +2070,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4073,7 +4073,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 0c1ae642e5..27987b5f02 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index f9887716ff..174a37228c 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 2100b003ea..32983c8ceb 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index bcc822f0fa..ed7eefac51 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 9494b8e5a1..87a3e4e43a 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 63faa7622a..09905896da 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 81a43c259f..7043c5a62f 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index a6086ebdb6..4a69ed9a97 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 9b91c6c4c5..cb012caba6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 251674895b..ec779bb85a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index c91d2cff4f..21cfcd97ef 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 251674895b..ec779bb85a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index ad1a29a7b7..13d0fa8425 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 508f6c8e20..2eaf15e4d7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 508f6c8e20..2eaf15e4d7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 61d05fc499..4385dd3e4b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index d7b6a46472..c88a995425 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 4f61cf329a..350241fb32 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 4d0e61bb2c..e3948e810c 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 76bf90fbdc..fbf988f9e5 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 9ac67285f7..4234a8f811 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 9ac67285f7..4234a8f811 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index d12b05870f..38d2db6eeb 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 9ac67285f7..4234a8f811 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 9ac67285f7..4234a8f811 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 80ac35ce05..00c36dddbe 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index e25ed703cf..eb6fbae163 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 7f5b2ede78..de73206f4d 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index d188a1e01e..dd451bd845 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index eff600b222..9a21436a37 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 67f14bfb82..666797d19e 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index af0bf10117..21507979cf 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.6 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 035683867c..fa822ff38e 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 81f53a6d72..7e2e35649c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.16 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 47d1a70bbe..ea001585c4 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.63 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 9ec2551985..5d051d6986 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 56ab62cf80..dd5b39f236 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 9e0f352c78..c6aa716745 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 035683867c..fa822ff38e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index fcbbd3b842..ce796208f0 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 508f6c8e20..2eaf15e4d7 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3aad85b35c..b91504413d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 7fe03b3643..aca73b3304 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 82e9a7fe18..143f245496 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 0c80aa8ded..15ee2f8c04 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 8344f01244..52a5dea983 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index a25a532c4b..4b070e255b 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 327bbfa586..73626d6040 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4074,7 +4074,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 760bce0c90..129ac02b36 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index ccc92ab1f0..d66f0f92f0 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 3bec3c9ab5..76aef9d45b 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index cf386fd0f7..9a918332f7 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4083,7 +4083,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index a08178f1b7..ebb4c64d80 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4083,7 +4083,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 178bcfaca1..7b88d10789 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index db8dc99a38..6f2fd829c2 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 447d8242fa..937d3b10c1 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 8b77917125..6e15291867 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 8b77917125..6e15291867 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 3b4a233ec1..8f2c91922f 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a44465b585..9a0444dd3b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2073,7 +2073,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 95a898a440..b65c876f0f 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index f26b2ca467..d9f34a5417 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2077,7 +2077,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4080,7 +4080,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 4131abf89a..d6297c0add 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4085,7 +4085,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index ab3f382fc3..f68389a8d8 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index a08c464a7f..f68d9e2a36 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index d7b7ee0d42..e479e8aba4 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2076,7 +2076,7 @@ #define LIN_ADVANCE #endif #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4082,7 +4082,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 8b70911c5d..27dfc52877 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 465f4ed025..1340708295 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -2078,7 +2078,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 431a4f4262..be9429e2fd 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 7d1fdd6926..938b1a4040 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 0d742f92f3..6ae6320e9a 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 0d742f92f3..6ae6320e9a 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 431a4f4262..be9429e2fd 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 0d742f92f3..6ae6320e9a 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 0d742f92f3..6ae6320e9a 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 8ee2f8076b..755a27906d 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 8ee2f8076b..755a27906d 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 8ee2f8076b..755a27906d 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 0bb0bd5cd7..9467f5fc3a 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 0bb0bd5cd7..9467f5fc3a 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 0bb0bd5cd7..9467f5fc3a 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index d6e2698737..8eef6d4fc8 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 447d8242fa..937d3b10c1 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 0bb0bd5cd7..9467f5fc3a 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index d6e2698737..8eef6d4fc8 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 0fba9a824f..fc5430b808 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 447d8242fa..937d3b10c1 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 0b5e6be55a..4c6cb37d35 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 9af95e73db..ca4dbf2c4a 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 431a4f4262..be9429e2fd 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 431a4f4262..be9429e2fd 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 45ad8a7a73..b5bb0c9b9a 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.02 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 77326a6fb5..645c136591 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 5a2d927717..f5ed36b086 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2073,7 +2073,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4073,7 +4073,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 2c1709922a..5a5f0f5f2b 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4083,7 +4083,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 65010b8239..820f0ca261 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index ca9582e959..4885264ed1 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4083,7 +4083,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 2d8e227149..d8f1225c95 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 4fe597530a..44a466bdbe 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index f7a4adf2d8..00d276cc45 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h index c5dee659ad..59a7fe0659 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4081,7 +4081,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 536299a7fc..1349813a09 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 9b099608eb..df19a7d68a 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index c6becac4bf..b6ff30d6fb 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4071,7 +4071,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 7042ffb97e..0e5e656d60 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index d26b8371c6..aa055e63fe 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 8556bfde65..a5d9418d78 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 74bbe8e6bf..d1d92ca735 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index e08b069741..56119d94b7 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 37de423f63..8e55765294 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 55cd5a5fcd..926292d308 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index ee1c61d692..86bfe98604 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index daae49f7d3..671cf2fc3f 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index dd588a9812..8b51042829 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -2073,7 +2073,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4076,7 +4076,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index daf747b48c..caf2ce76a1 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index c2c118d5da..b5123018cf 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 4eb96ca7fd..ccf2ad5cce 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4085,7 +4085,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 4d3c1c8314..39910547aa 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4082,7 +4082,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index f2afa52c51..c46a235347 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 1969095363..3dcb8a3066 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 447d8242fa..937d3b10c1 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index d1c5c50f87..69c4a8a12a 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index d1c5c50f87..69c4a8a12a 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index d1c5c50f87..69c4a8a12a 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 5587177c0b..69b582efd0 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 800e201eaf..b6ebaa8ec4 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index b6c8e9a2d7..bdffefc3b1 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 44cfa52443..8a7a8fe598 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 590b040002..5d0e6e6972 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index aceca2d694..6603ab3390 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 386dde696b..2d74be18c5 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2077,7 +2077,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4080,7 +4080,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 2c95196de0..41be0d8b27 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2077,7 +2077,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4080,7 +4080,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 10a07db90f..f2bf435cb5 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 54d1166b22..abc06e5317 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 91db9fc87a..14d50dca39 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index db198dc1f5..a1101dfef8 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index 877c9d2561..3ab93c5602 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 37244b81a3..794cce8fad 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 488eee2509..86b600da98 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index eabae3507c..ec08983875 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 8cf00ade52..e303ef5a5c 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 57d1c01620..0a5cfdffae 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 03b44f8e22..f6b2d4da01 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 03b44f8e22..f6b2d4da01 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index f7504ae857..418e91f718 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index bdc8d635e0..0823868dd6 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 27a7a4e307..f576f8b25f 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index acc5eb3e58..8007b527b8 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -2078,7 +2078,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4081,7 +4081,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index d4945ed2c7..5183b852ca 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2078,7 +2078,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4081,7 +4081,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 2ef6660f59..e81d19e31d 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 7341412882..21e893b40c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 7341412882..21e893b40c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index f7bebecef4..e23ba97244 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 6918f52b07..1e7b990d98 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4084,7 +4084,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 9bab98f89e..e624af5750 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2080,7 +2080,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4084,7 +4084,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 682272a90c..57833a56e0 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 5307bd8723..1b9f720c4c 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 9c9f558e0f..f443751e8e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index 4901c5fc1a..cb717a1db2 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index f2ed20bd51..44f8df78d8 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index c6f1dc2e94..44d4345b9d 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 40283a4434..2ab5dce633 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 8abd0b35d4..cd13463cb8 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 4a6930d2e4..a93a8a533c 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 9b947ac0c2..af41de7178 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -2090,7 +2090,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4093,7 +4093,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index ba4281153f..2eba5e2f69 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2087,7 +2087,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4090,7 +4090,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 68ac1e26d9..9b1f6dcbdc 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 68ac1e26d9..9b1f6dcbdc 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 6ba609f94c..1dd08884c7 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index c36830f73b..a6ee90e447 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 22598e5f2e..133db5b14f 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 14b3b0cea4..d7fd30a1aa 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 2a66b492b0..feaab10ac9 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 818f29223b..16c8bce570 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 818f29223b..16c8bce570 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index a0ce23a21a..f6c0260ec9 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index bb8ea257ad..d7911563c1 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index e3db523046..6610127af0 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index d2c9a03c3e..fb5e03fa4d 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 91e817e91e..9ed0846785 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 8a75c15afe..166d1aebf6 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 9dbd225833..0acb8918c2 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2077,7 +2077,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4080,7 +4080,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 4bc75daa65..40bfc623c0 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 4bc75daa65..40bfc623c0 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 34bf2d27e2..1a64c991b1 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 34ea09c444..3e633cec58 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index f98e0f737b..c807caf703 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2076,7 +2076,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4079,7 +4079,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 13527f06c6..e7ca92d94e 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 13527f06c6..e7ca92d94e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index dc8116b69d..193c513733 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 45ad598b17..2af846776f 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 45ad598b17..2af846776f 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 45ad598b17..2af846776f 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 45ad598b17..2af846776f 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + #define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4075,7 +4075,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index ed71fdd77c..53ace75d85 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 44b2c00f94..4c33c2600d 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index c5ab1fddd5..521a10750c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index a45d6abf42..9875468320 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 903c50ab4d..8af0f427c0 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index da781378e5..3101db5e31 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2067,7 +2067,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4065,7 +4065,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index dc8116b69d..193c513733 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index db8a3c780f..6c0f7bcc32 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. #define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 733b0c98ce..a154746622 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2075,7 +2075,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4078,7 +4078,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index a51b9a7036..f562ca5c9a 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 0a6de0f850..0a133c4175 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index e4abdb7c25..eafd98ee05 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 2e1611a84d..b609adeab6 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2074,7 +2074,7 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900. + //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900 L. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // Print debug information to serial during operation. Disable for production use. //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA. @@ -4077,7 +4077,7 @@ /** * Mechanical Gantry Calibration - * Modern replacement for the Prusa TMC_Z_CALIBRATION. + * Modern replacement for the Průša TMC_Z_CALIBRATION. * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. * @section calibrate