3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-16 11:17:54 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 DGUS Reloaded 1.03

Browse source 
MarlinFirmware/Marlin#25490

Co-Authored-By: Neo2003 <28825+Neo2003@users.noreply.github.com>
This commit is contained in:
Scott Lahteine 2023-03-10 23:11:58 -06:00
parent a008a1aca3
commit c728f9a28f
339 changed files with 348 additions and 349 deletions
Download patch file Download diff file Expand all files Collapse all files

22
config/examples/Tronxy/XY2-Pro/Configuration.h
View file

@ -63,37 +63,37 @@
/**
* *** IMPORTANT INFO FOR THE TRONXY XY2-PRO PLEASE READ ***
*
*
* This config is for the TronXY XY2-Pro Single Titan Extruder.
* So far it has been tested on a single machine (mine).
* It works on mine, may or may not work on yours, use at your own risk.
* It similarly may or may not work on other XY2-Pro models.
*
*
* IMPORTANT:
* This config is for a Xy2-Pro with a V6 board.
* Your XY2-Pro may not have a V6 board. Many V5s exist
* Set MOTHERBOARD to the appropriate board, once again at your own risk
*
*
* IMPORTANT:
* The stock induction z level sensor remains untested. If you test it and it works please update this config.
*
* The stock induction z level sensor remains untested. If you test it and it works please update this config.
*
* Possible issues that remain:
*
*
* The main fan on the titan extruder (seemingly the unnecessary one to "cool the hotend") is not currently supported
* If you find out how to support it, add support in this file, but I've found this fan to be unnecessary.
*
*
* DEFAULT_AXIS_STEPS_PER_UNIT may not be as accurate as required. The true extruder value may be about 5% lower than in reality
* I can't tell if my extruder unit is messing up here however since these values were previously fine, so I'm leaving it as is.
* X and Y steps may also be slightly low, Z seems fine however.
* I personally run my printer with 10% to 20% extra flow.
*
*
* I've attempted to add PID support to the bed header. For some reason getting the values has resulted in very slow heating,
* and I'm not versed enough in control theory to manually mess with these. As such, I have disabled PID bed heating
* I've found the printer works fine without PID bed heating however.
*
*
* I've enabled BLTouch support largely following this guide: https://youtu.be/sxubnQ2Gpkc
* This requires you to add line "#define SERVO0_PIN PB11" into Marlin/src/pins/stm32f1/pins_CHITU3d_V6.h
*
*
*/
// Author info of this build printed to the host during boot and M115
@ -3091,7 +3091,7 @@
* - Product: https://www.aliexpress.com/item/1005002008179262.html
*
* RELOADED (T5UID1)
* - Download https://github.com/Desuuuu/DGUS-reloaded/releases
* - Download https://github.com/Neo2003/DGUS-reloaded/releases
* - Copy the downloaded DWIN_SET folder to the SD card.
*
* IA_CREALITY (T5UID1)