diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 641edae34a..06df272717 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -73,7 +73,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(Skorpi, Creality Ender-4, brandstaetter)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(Skorpi, Creality Ender-4, brandstaetter, xymopen)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -493,13 +493,13 @@
 
   // Ender-4
   #define DEFAULT_Kp 16.67
-  #define DEFAULT_Ki 1.12
+  #define DEFAULT_Ki  1.12
   #define DEFAULT_Kd 62.14
 
   // Ultimaker
-//  #define DEFAULT_Kp 22.2
-//  #define DEFAULT_Ki 1.08
-//  #define DEFAULT_Kd 114
+  //#define DEFAULT_Kp 22.2
+  //#define DEFAULT_Ki 1.08
+  //#define DEFAULT_Kd 114
 
   // MakerGear
   //#define DEFAULT_Kp 7.0
@@ -756,14 +756,14 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT    { 80, 80, 400, 100 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT    { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 500, 500, 15, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 250, 250, 5, 25 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -776,7 +776,7 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 10000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -791,9 +791,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION          500    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -803,11 +803,11 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-//#define CLASSIC_JERK
+#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
   #define DEFAULT_XJERK 10.0
   #define DEFAULT_YJERK 10.0
-  #define DEFAULT_ZJERK  2.4
+  #define DEFAULT_ZJERK  1.2
 
   //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
 
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 21568dc50e..7d30c03619 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -184,8 +184,8 @@
    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
    * below 2.
    */
-  #define WATCH_TEMP_PERIOD 30                // Seconds
-  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
+  #define WATCH_TEMP_PERIOD 16                // Seconds
+  #define WATCH_TEMP_INCREASE 4               // Degrees Celsius
 #endif
 
 /**
@@ -813,7 +813,7 @@
 // Default stepper release if idle. Set to 0 to deactivate.
 // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
 // Time can be set by M18 and M84.
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DEFAULT_STEPPER_DEACTIVE_TIME 300
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z false  // Set to false if the nozzle will fall down on your printed part when print has finished.
@@ -1028,8 +1028,8 @@
 // Change values more rapidly when the encoder is rotated faster
 #define ENCODER_RATE_MULTIPLIER
 #if ENABLED(ENCODER_RATE_MULTIPLIER)
-  #define ENCODER_10X_STEPS_PER_SEC   30  // (steps/s) Encoder rate for 10x speed
-  #define ENCODER_100X_STEPS_PER_SEC  80  // (steps/s) Encoder rate for 100x speed
+  #define ENCODER_10X_STEPS_PER_SEC   75  // (steps/s) Encoder rate for 10x speed
+  #define ENCODER_100X_STEPS_PER_SEC  160  // (steps/s) Encoder rate for 100x speed
 #endif
 
 // Play a beep when the feedrate is changed from the Status Screen