✨ VOLUMETRIC_EXTRUDER_LIMIT_MAX

MarlinFirmware/Marlin#25884

config/default/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -3841,6 +3841,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Alfawise/U20/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -3833,6 +3833,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A2plus/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A6/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A8/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A8plus/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/A9/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/E10/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/E16/Stock/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET4+/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET4-Pro/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET4/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET4X/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET5-Pro/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET5/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Anet/ET5X/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/Chiron/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/Vyper/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/ArmEd/Configuration_adv.h

@@ -3836,6 +3836,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Genius Pro/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Genius/BLTouch/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Genius/V1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Hornet/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Artillery/Sidewinder X2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -3828,6 +3828,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/B1 SE Plus/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/B1 SE/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/B1/Configuration_adv.h

@@ -3833,6 +3833,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/BX/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/Hurakan/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BIQU/Thunder Standard/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -3839,6 +3839,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/CTC/A13/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/CTC/Bizer/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Cartesio/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h

@@ -3828,6 +3828,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 V2/Configuration_adv.h

@@ -3837,6 +3837,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10 V3/Configuration_adv.h

@@ -3839,6 +3839,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h

@@ -3834,6 +3834,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-20/Stock/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-30 PrintMill/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-6 SE/Configuration_adv.h

@@ -3821,6 +3821,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/CR-8/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Max/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Neo/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h

@@ -3831,6 +3831,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2 Neo/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif
 

config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h

@@ -3832,6 +3832,7 @@
      * A non-zero value activates Volume-based Extrusion Limiting.
      */
     #define DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT  0.00     // (mm^3/sec)
+    #define VOLUMETRIC_EXTRUDER_LIMIT_MAX     20        // (mm^3/sec)
   #endif
 #endif