From bf31f93bcd4dcd8022aa8a522157f6eadda6c89b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 10 Mar 2025 21:45:29 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Config=20comments=20with=20units?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/default/Configuration_adv.h | 6 +++--- config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 6 +++--- config/examples/3DMatik/XL/Configuration_adv.h | 6 +++--- config/examples/ADIMLab/Gantry v1/Configuration_adv.h | 6 +++--- config/examples/ADIMLab/Gantry v2/Configuration_adv.h | 6 +++--- config/examples/Alfawise/U20-bltouch/Configuration_adv.h | 6 +++--- config/examples/Alfawise/U20/Configuration_adv.h | 6 +++--- config/examples/AliExpress/CL-260/Configuration_adv.h | 6 +++--- config/examples/AliExpress/UM2pExt/Configuration_adv.h | 6 +++--- config/examples/Anet/A2/Configuration_adv.h | 6 +++--- config/examples/Anet/A2plus/Configuration_adv.h | 6 +++--- config/examples/Anet/A6/Configuration_adv.h | 6 +++--- config/examples/Anet/A8/Configuration_adv.h | 6 +++--- config/examples/Anet/A8plus/Configuration_adv.h | 6 +++--- config/examples/Anet/A9/Configuration_adv.h | 6 +++--- config/examples/Anet/E10/Configuration_adv.h | 6 +++--- config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h | 6 +++--- config/examples/Anet/E16/Stock/Configuration_adv.h | 6 +++--- config/examples/Anet/ET4+/Configuration_adv.h | 6 +++--- config/examples/Anet/ET4-Pro/Configuration_adv.h | 6 +++--- config/examples/Anet/ET4/Configuration_adv.h | 6 +++--- config/examples/Anet/ET4X/Configuration_adv.h | 6 +++--- config/examples/Anet/ET5-Pro/Configuration_adv.h | 6 +++--- config/examples/Anet/ET5/Configuration_adv.h | 6 +++--- config/examples/Anet/ET5X/Configuration_adv.h | 6 +++--- config/examples/AnyCubic/Chiron/Configuration_adv.h | 6 +++--- .../AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h | 6 +++--- .../AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h | 6 +++--- config/examples/AnyCubic/Vyper/Configuration_adv.h | 6 +++--- .../AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h | 6 +++--- .../i3 Mega/Trigorilla Pro STM32/Configuration_adv.h | 6 +++--- config/examples/AnyCubic/i3/Configuration_adv.h | 6 +++--- config/examples/ArmEd/Configuration_adv.h | 6 +++--- config/examples/Artillery/Genius Pro/Configuration_adv.h | 6 +++--- .../examples/Artillery/Genius/BLTouch/Configuration_adv.h | 6 +++--- config/examples/Artillery/Genius/V1/Configuration_adv.h | 6 +++--- config/examples/Artillery/Hornet/Configuration_adv.h | 6 +++--- .../Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h | 6 +++--- .../examples/Artillery/Sidewinder X1/V1/Configuration_adv.h | 6 +++--- config/examples/Artillery/Sidewinder X2/Configuration_adv.h | 6 +++--- config/examples/Azteeg/X5GT/Configuration_adv.h | 6 +++--- config/examples/BIBO/TouchX/cyclops/Configuration_adv.h | 6 +++--- .../BIBO/TouchX/default - BLTouch/Configuration_adv.h | 6 +++--- config/examples/BIBO/TouchX/default/Configuration_adv.h | 6 +++--- config/examples/BIQU/B1 SE Plus/Configuration_adv.h | 6 +++--- config/examples/BIQU/B1 SE/Configuration_adv.h | 6 +++--- config/examples/BIQU/B1/Configuration_adv.h | 6 +++--- config/examples/BIQU/BX/Configuration_adv.h | 6 +++--- config/examples/BIQU/Hurakan/Configuration_adv.h | 6 +++--- config/examples/BIQU/Thunder Standard/Configuration_adv.h | 6 +++--- config/examples/BQ/Hephestos/Configuration_adv.h | 6 +++--- config/examples/BQ/Hephestos_2/Configuration_adv.h | 6 +++--- config/examples/BQ/WITBOX/Configuration_adv.h | 6 +++--- config/examples/CNC/miniRambo/Configuration_adv.h | 6 +++--- config/examples/CTC/A13/Configuration_adv.h | 6 +++--- config/examples/CTC/Bizer/Configuration_adv.h | 6 +++--- .../examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h | 6 +++--- config/examples/Cartesio/Configuration_adv.h | 6 +++--- config/examples/Copymaster3D/300/Configuration_adv.h | 6 +++--- config/examples/Copymaster3D/400/Configuration_adv.h | 6 +++--- config/examples/Copymaster3D/500/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-10 Max/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../Creality/CR-10 Mini/CrealityV1/Configuration_adv.h | 6 +++--- .../Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h | 6 +++--- .../Creality/CR-10 S4/CrealityV1/Configuration_adv.h | 6 +++--- .../Configuration_adv.h | 6 +++--- .../CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h | 6 +++--- .../Creality/CR-10 S5/CrealityV1/Configuration_adv.h | 6 +++--- .../CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h | 6 +++--- .../CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-10 V2/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-10 V3/Configuration_adv.h | 6 +++--- .../CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../examples/Creality/CR-10/CrealityV1/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-10S Pro/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h | 6 +++--- .../CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h | 6 +++--- .../CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h | 6 +++--- .../CR-10S/CrealityV1 - BLTouch/Configuration_adv.h | 6 +++--- .../examples/Creality/CR-10S/CrealityV1/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-20 Pro/Configuration_adv.h | 6 +++--- .../CR-20/RepRapWorld Minitronics20/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-20/Stock/Configuration_adv.h | 6 +++--- .../examples/Creality/CR-30 PrintMill/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-6 SE/Configuration_adv.h | 6 +++--- config/examples/Creality/CR-8/Configuration_adv.h | 6 +++--- .../Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h | 6 +++--- .../Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-2/Configuration_adv.h | 6 +++--- .../examples/Creality/Ender-3 Max Neo/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-3 Max/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-3 Neo/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR 1.4 Turbo/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../Ender-3 Pro/Creality free-runs/Configuration_adv.h | 6 +++--- .../Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h | 6 +++--- .../Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h | 6 +++--- .../Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h | 6 +++--- .../Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h | 6 +++--- .../examples/Creality/Ender-3 S1 Plus/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h | 6 +++--- .../Creality/Ender-3 S1/STM32F1/Configuration_adv.h | 6 +++--- .../Creality/Ender-3 S1/STM32F4/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../Ender-3 V2 Neo/CrealityV422/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h | 6 +++--- .../CrealityUI/Configuration_adv.h | 6 +++--- .../MarlinUI/Configuration_adv.h | 6 +++--- .../CrealityUI/Configuration_adv.h | 6 +++--- .../MarlinUI/Configuration_adv.h | 6 +++--- .../Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h | 6 +++--- .../Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h | 6 +++--- .../Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h | 6 +++--- .../Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h | 6 +++--- .../2-into-1 Hotend/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h | 6 +++--- .../Single Extruder/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/Creality free-runs/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/CrealityV1/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/CrealityV422/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/CrealityV427/Configuration_adv.h | 6 +++--- .../Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h | 6 +++--- .../Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h | 6 +++--- .../Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h | 6 +++--- .../Ender-3/FYSETC Cheetah/base/Configuration_adv.h | 6 +++--- .../examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h | 6 +++--- .../Creality/Ender-3/MKS Robin E3P/Configuration_adv.h | 6 +++--- .../Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-4/Configuration_adv.h | 6 +++--- .../Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h | 6 +++--- .../Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h | 6 +++--- .../CrealityV1 (RELOADED UI)/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR E3 Turbo/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 6 +++--- .../Configuration_adv.h | 6 +++--- .../Configuration_adv.h | 6 +++--- .../Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h | 6 +++--- .../Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h | 6 +++--- .../Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-5 S1/Configuration_adv.h | 6 +++--- .../Configuration_adv.h | 6 +++--- .../Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 6 +++--- .../Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h | 6 +++--- .../Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../Configuration_adv.h | 6 +++--- .../Creality/Ender-5/Creality free-runs/Configuration_adv.h | 6 +++--- .../Creality/Ender-5/CrealityV1/Configuration_adv.h | 6 +++--- .../Ender-5/CrealityV427 with BLTouch/Configuration_adv.h | 6 +++--- .../Creality/Ender-5/CrealityV427/Configuration_adv.h | 6 +++--- config/examples/Creality/Ender-6/Configuration_adv.h | 6 +++--- config/examples/Dagoma/Disco Ultimate/Configuration_adv.h | 6 +++--- config/examples/Daycom/3DP-100/Configuration_adv.h | 6 +++--- .../EXP3D/Imprimante multifonction/Configuration_adv.h | 6 +++--- config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h | 6 +++--- config/examples/Eazao/Zero/Configuration_adv.h | 6 +++--- config/examples/Einstart-S/Configuration_adv.h | 6 +++--- config/examples/Elegoo/Neptune 2/Configuration_adv.h | 6 +++--- config/examples/Eryone/Thinker SE/Configuration_adv.h | 6 +++--- config/examples/Eryone/Thinker V2/Configuration_adv.h | 6 +++--- config/examples/FYSETC/AIO_II/Configuration_adv.h | 6 +++--- config/examples/FYSETC/F6_13/Configuration_adv.h | 6 +++--- config/examples/FYSETC/S6/Configuration_adv.h | 6 +++--- config/examples/Felix/DUAL/Configuration_adv.h | 6 +++--- config/examples/Felix/Single/Configuration_adv.h | 6 +++--- config/examples/FlashForge/Creator 2X/Configuration_adv.h | 6 +++--- config/examples/FlashForge/CreatorPro/Configuration_adv.h | 6 +++--- .../FlyingBear/FlyingBearGhost_v3/Configuration_adv.h | 6 +++--- config/examples/FlyingBear/P902/Configuration_adv.h | 6 +++--- config/examples/FlyingBear/P905H/Configuration_adv.h | 6 +++--- config/examples/FoamCutter/generic/Configuration_adv.h | 6 +++--- config/examples/FoamCutter/rcKeith/Configuration_adv.h | 6 +++--- config/examples/FolgerTech/FT-5 R2/Configuration_adv.h | 6 +++--- config/examples/FolgerTech/i3-2020/Configuration_adv.h | 6 +++--- config/examples/Formbot/Raptor/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A10/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A10D/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h | 6 +++--- .../Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A10PRO/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h | 6 +++--- .../Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A20/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A20M/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A20T/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A30/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A30M/Configuration_adv.h | 6 +++--- config/examples/Geeetech/A30T/Configuration_adv.h | 6 +++--- config/examples/Geeetech/D200/Configuration_adv.h | 6 +++--- config/examples/Geeetech/Duplicator5/Configuration_adv.h | 6 +++--- config/examples/Geeetech/E180/Configuration_adv.h | 6 +++--- config/examples/Geeetech/GT2560/Configuration_adv.h | 6 +++--- .../examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h | 6 +++--- config/examples/Geeetech/M201/Configuration_adv.h | 6 +++--- config/examples/Geeetech/MeCreator2/Configuration_adv.h | 6 +++--- config/examples/Geeetech/Me_creator/Configuration_adv.h | 6 +++--- config/examples/Geeetech/Me_ducer/Configuration_adv.h | 6 +++--- config/examples/Geeetech/PI3A PRO/Configuration_adv.h | 6 +++--- .../Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h | 6 +++--- .../Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h | 6 +++--- config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h | 6 +++--- config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h | 6 +++--- config/examples/HMS434/Configuration_adv.h | 6 +++--- config/examples/Hictop/3DP-17/Configuration_adv.h | 6 +++--- config/examples/Infitary/i3-M508/Configuration_adv.h | 6 +++--- config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h | 6 +++--- config/examples/JGAurora/A1/Configuration_adv.h | 6 +++--- config/examples/JGAurora/A3/Configuration_adv.h | 6 +++--- config/examples/JGAurora/A5/Configuration_adv.h | 6 +++--- config/examples/JGAurora/A5S/Configuration_adv.h | 6 +++--- config/examples/JGAurora/Magic/Configuration_adv.h | 6 +++--- config/examples/Kingroon/KP3/Configuration_adv.h | 6 +++--- config/examples/Kingroon/KP3S/Configuration_adv.h | 6 +++--- config/examples/Kingroon/KP3S_Pro/Configuration_adv.h | 6 +++--- config/examples/Kingroon/KP5L-DIY/Configuration_adv.h | 6 +++--- config/examples/Labists/ET4/Configuration_adv.h | 6 +++--- config/examples/Longer/LK5/Configuration_adv.h | 6 +++--- config/examples/LulzBot/TAZ4/Configuration_adv.h | 6 +++--- config/examples/MBot/Cube/Configuration_adv.h | 6 +++--- config/examples/MakerFarm/Pegasus 12/Configuration_adv.h | 6 +++--- config/examples/MakerParts/Configuration_adv.h | 6 +++--- .../examples/MakerTech3D/Proforge2sDual/Configuration_adv.h | 6 +++--- config/examples/Malyan/M150/Configuration_adv.h | 6 +++--- config/examples/Malyan/M180/Configuration_adv.h | 6 +++--- config/examples/Malyan/M200/Configuration_adv.h | 6 +++--- config/examples/Materia101/Configuration_adv.h | 6 +++--- config/examples/Micromake/C1/basic/Configuration_adv.h | 6 +++--- config/examples/Micromake/C1/enhanced/Configuration_adv.h | 6 +++--- config/examples/Mks/Robin/Configuration_adv.h | 6 +++--- config/examples/Mks/Robin_Lite3/Configuration_adv.h | 6 +++--- config/examples/Mks/Robin_Pro/Configuration_adv.h | 6 +++--- config/examples/Mks/Sbase/Configuration_adv.h | 6 +++--- config/examples/Modix/Big60/Configuration_adv.h | 6 +++--- config/examples/Nextion/Configuration_adv.h | 6 +++--- .../ORD Bot/Hadron/Sanguinololu/Configuration_adv.h | 6 +++--- config/examples/Opulo/Lumen_REV3/Configuration_adv.h | 6 +++--- config/examples/Opulo/Lumen_REV4/Configuration_adv.h | 6 +++--- config/examples/Opulo/Lumen_REV5/Configuration_adv.h | 6 +++--- config/examples/Ortur 4/Configuration_adv.h | 6 +++--- config/examples/Polargraph/Configuration_adv.h | 6 +++--- config/examples/Printrbot/PrintrboardG2/Configuration_adv.h | 6 +++--- .../Printrbot/Simple Metal RevD/Configuration_adv.h | 6 +++--- .../Printrbot/Simple_Metal_RevF6/Configuration_adv.h | 6 +++--- config/examples/Prusa/MK3/Configuration_adv.h | 6 +++--- .../Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h | 6 +++--- config/examples/Qidi/Qidi 1/Configuration_adv.h | 6 +++--- config/examples/Raiscube/A8r/Configuration_adv.h | 6 +++--- config/examples/RapideLite/RL200/Configuration_adv.h | 6 +++--- config/examples/Renkforce/RF100/Configuration_adv.h | 6 +++--- config/examples/Renkforce/RF100XL/Configuration_adv.h | 6 +++--- config/examples/Renkforce/RF100v2/Configuration_adv.h | 6 +++--- config/examples/RepRapPro/Huxley/Configuration_adv.h | 6 +++--- config/examples/RepRapWorld/Megatronics/Configuration_adv.h | 6 +++--- .../examples/RepRapWorld/Minitronics11/Configuration_adv.h | 6 +++--- .../RepRapWorld/Minitronics20/CNC/Configuration_adv.h | 6 +++--- config/examples/RigidBot/Configuration_adv.h | 6 +++--- config/examples/Robo3D/R1+/Configuration_adv.h | 6 +++--- config/examples/Rolohaun/Rook MK1/Configuration_adv.h | 6 +++--- config/examples/SCARA/MP_SCARA/Configuration_adv.h | 6 +++--- config/examples/SCARA/Morgan/Configuration_adv.h | 6 +++--- .../examples/STM32/Black_STM32F407VET6/Configuration_adv.h | 6 +++--- config/examples/STM32/STM32F103RE/Configuration_adv.h | 6 +++--- config/examples/Simax/Mi-M200/Configuration_adv.h | 6 +++--- config/examples/Simulator/Configuration_adv.h | 6 +++--- .../SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h | 6 +++--- .../SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- .../SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h | 6 +++--- config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h | 6 +++--- .../examples/Sovol/SV-01/CrealityV221/Configuration_adv.h | 6 +++--- config/examples/Sovol/SV-02/Configuration_adv.h | 6 +++--- config/examples/Sovol/SV-03/Configuration_adv.h | 6 +++--- config/examples/Sovol/SV-05/Configuration_adv.h | 6 +++--- config/examples/Sovol/SV-06/Configuration_adv.h | 6 +++--- config/examples/Sunlu/S8/Configuration_adv.h | 6 +++--- config/examples/Sunlu/T3/Configuration_adv.h | 6 +++--- config/examples/TPARA/AXEL_TPARA/Configuration_adv.h | 6 +++--- config/examples/Tevo/Michelangelo/Configuration_adv.h | 6 +++--- config/examples/Tevo/Nereus/Configuration_adv.h | 6 +++--- .../Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h | 6 +++--- .../Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h | 6 +++--- .../examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h | 6 +++--- .../Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h | 6 +++--- .../Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h | 6 +++--- config/examples/TinyBoy2/Configuration_adv.h | 6 +++--- .../Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h | 6 +++--- config/examples/Tronxy/X1/Configuration_adv.h | 6 +++--- config/examples/Tronxy/X3A/Configuration_adv.h | 6 +++--- .../X5S-2E/Green Board (Chitu V5)/Configuration_adv.h | 6 +++--- .../X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h | 6 +++--- config/examples/Tronxy/X5S/Configuration_adv.h | 6 +++--- config/examples/Tronxy/X5SA-2E/Configuration_adv.h | 6 +++--- config/examples/Tronxy/X5SA/Configuration_adv.h | 6 +++--- config/examples/Tronxy/XY100/Configuration_adv.h | 6 +++--- config/examples/Tronxy/XY2-Pro/Configuration_adv.h | 6 +++--- config/examples/Turnigy/Fabrikator/Configuration_adv.h | 6 +++--- config/examples/Two Trees/BlueR Plus/Configuration_adv.h | 6 +++--- .../examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h | 6 +++--- .../examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h | 6 +++--- .../examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h | 6 +++--- config/examples/Two Trees/SP-5_V3/Configuration_adv.h | 6 +++--- .../Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h | 6 +++--- .../Sapphire Plus/Sapphire Plus V2/Configuration_adv.h | 6 +++--- config/examples/Two Trees/Sapphire Pro/Configuration_adv.h | 6 +++--- config/examples/UltiMachine/Archim1/Configuration_adv.h | 6 +++--- config/examples/UltiMachine/Archim2/Configuration_adv.h | 6 +++--- config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h | 6 +++--- config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h | 6 +++--- .../Ultimaker Original (1.5.7)/Configuration_adv.h | 6 +++--- .../Ultimaker Original Plus (2.1.1)/Configuration_adv.h | 6 +++--- .../Ultimaker Original Plus DXU/Configuration_adv.h | 6 +++--- config/examples/VORONDesign/Configuration_adv.h | 6 +++--- config/examples/Velleman/K8200 Upgraded/Configuration_adv.h | 6 +++--- config/examples/Velleman/K8200/Configuration_adv.h | 6 +++--- .../examples/Velleman/K8400/Dual-head/Configuration_adv.h | 6 +++--- .../examples/Velleman/K8400/Single-head/Configuration_adv.h | 6 +++--- .../Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h | 6 +++--- config/examples/WASP/PowerWASP/Configuration_adv.h | 6 +++--- config/examples/Wanhao/Duplicator 4S/Configuration_adv.h | 6 +++--- config/examples/Wanhao/Duplicator 6/Configuration_adv.h | 6 +++--- .../examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h | 6 +++--- .../examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h | 6 +++--- .../examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h | 6 +++--- config/examples/Weedo/Tina2/V2/Configuration_adv.h | 6 +++--- config/examples/Weedo/Tina2/V3/Configuration_adv.h | 6 +++--- config/examples/Weistek/wt150/Configuration_adv.h | 6 +++--- config/examples/Zonestar/P802M/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h | 6 +++--- .../BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h | 6 +++--- .../delta/Anycubic/Kossel Linear Plus/Configuration_adv.h | 6 +++--- config/examples/delta/Anycubic/Kossel/Configuration_adv.h | 6 +++--- config/examples/delta/Anycubic/Predator/Configuration_adv.h | 6 +++--- .../examples/delta/Dreammaker/Overlord/Configuration_adv.h | 6 +++--- .../delta/Dreammaker/Overlord_Pro/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/QQ-S/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h | 6 +++--- .../examples/delta/FLSUN/auto_calibrate/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/kossel/Configuration_adv.h | 6 +++--- config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h | 6 +++--- config/examples/delta/Geeetech/G2/Configuration_adv.h | 6 +++--- config/examples/delta/Geeetech/G2Pro/Configuration_adv.h | 6 +++--- config/examples/delta/Geeetech/G2S/Configuration_adv.h | 6 +++--- config/examples/delta/Geeetech/G2SPro/Configuration_adv.h | 6 +++--- .../examples/delta/Geeetech/Rostock 301/Configuration_adv.h | 6 +++--- config/examples/delta/Hatchbox_Alpha/Configuration_adv.h | 6 +++--- config/examples/delta/MKS/SBASE/Configuration_adv.h | 6 +++--- config/examples/delta/Malyan M300/Configuration_adv.h | 6 +++--- .../examples/delta/Tevo Little Monster/Configuration_adv.h | 6 +++--- config/examples/delta/Velleman/K8800/Configuration_adv.h | 6 +++--- config/examples/delta/generic/Configuration_adv.h | 6 +++--- config/examples/delta/kossel_clear/Configuration_adv.h | 6 +++--- config/examples/delta/kossel_mini/Configuration_adv.h | 6 +++--- config/examples/delta/kossel_pro/Configuration_adv.h | 6 +++--- config/examples/delta/kossel_xl/Configuration_adv.h | 6 +++--- config/examples/gCreate/gMax1.5+/Configuration_adv.h | 6 +++--- .../linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h | 6 +++--- .../linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h | 6 +++--- config/examples/makibox/Configuration_adv.h | 6 +++--- config/examples/tvrrug/Round2/Configuration_adv.h | 6 +++--- 380 files changed, 1140 insertions(+), 1140 deletions(-) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 25aefcc9e6..9d67f1e509 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index 9e66bc692d..4b256b9120 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 3057067eec..9a9382d8b9 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 9e57c77834..d7a90e5620 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 72b9c736c1..8d40a612b7 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -2017,7 +2017,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2271,7 +2271,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2312,7 +2312,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 5d675f9777..b75e1e5122 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 172227c804..e00da2288d 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index d8986448a3..9eb5fde293 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index d8986448a3..9eb5fde293 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 261688e15f..a21a244694 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index d32a88907b..fdfd21c554 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index b7104fbf08..3e4e825774 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 81b8694912..c44ae6677c 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index e5666900ad..9664352e61 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 7155bfb636..a4d439932d 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 1b922ee467..69c7409949 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index f62f0fc310..f43bfddfdc 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index f62f0fc310..f43bfddfdc 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index f62f0fc310..f43bfddfdc 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index f62f0fc310..f43bfddfdc 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 13e734ad8e..0e551cfa1b 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 13e734ad8e..0e551cfa1b 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 13e734ad8e..0e551cfa1b 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 095c408265..37c4b10faf 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 1ef38a1f13..e11ce19228 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index d1f08cc88c..1b17abf25c 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 1568dfe3b5..a335f6db87 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 3166915b63..d7e47d6dae 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index f8b7ee5227..61450ac0cf 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index eb122e61ae..290ce12ef1 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 28e7015539..a1cef1431e 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 17e2468684..4af5e9ff47 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -2013,7 +2013,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2266,7 +2266,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2307,7 +2307,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 19354fc8be..52efc5fb6a 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 37abf9e241..4c44f9e0d5 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index 1a09e875e4..621cfd7472 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 69bc9f51c4..f2dedcb00a 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 5304c80ae2..cd2d21b61a 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index 1a09e875e4..621cfd7472 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 40aa748fb5..c2f38b1295 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 2239359235..3fdfeaf03c 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h index 181cdbfbc3..5224d3f9f1 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index e12eddf555..4eb3ee661a 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -2005,7 +2005,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2258,7 +2258,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2299,7 +2299,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 35c10bbb88..89df0bca2a 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 617d6defb0..899b5faae9 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 6470f3e5c3..0146b7bec9 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 9673eea43a..5695775074 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index 9352e39468..c06e9ca7d3 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index 6ff5c8aa6f..ad9c644ab8 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 628e3878b1..7ef5ac36b7 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index cd42d5eecd..dc5963eb32 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -2016,7 +2016,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2269,7 +2269,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2310,7 +2310,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1500 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 628e3878b1..7ef5ac36b7 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index 70f3aaf56a..3ae597a769 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index d0f671af08..6b79d3356f 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index a5d59bfe09..fd1f840636 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index a24482b28f..3079eb86d6 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index ef49f20ddf..c6a5f62b79 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ad0835778d..3a6f154634 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 70786e19ae..b3836d17f6 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 61dffab72e..e1fca2d768 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index a3147fd76d..3b0cdafb07 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -2007,7 +2007,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2260,7 +2260,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2301,7 +2301,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index c1eb78ea78..fd748098ab 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index ee4a2364a0..cc9b74eae1 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index ce1bb718b7..820e89774b 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index c1eb78ea78..fd748098ab 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index 1add1c02e1..2ccd3f9f52 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index 14e80e035c..941ccd1c30 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 834f71c42f..dc12da01f4 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index d3974ce4d9..94d7fd41c4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9aa7fc5304..1cbfdbf9d7 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 34a7a9bffc..0270b9bf20 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index cd8745d017..e569069374 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index a2e3c4862e..800e7842e6 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index aef7e796bb..a7be9f43f9 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 8f64c4a787..23dafcbd0c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9aa7fc5304..1cbfdbf9d7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 633a146270..242e07da48 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index a1314591b6..c99a1b8d2c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index 8d2a7be434..033fe25bb7 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 2e3642e6de..4307ff210e 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 59a74ca290..fffd14125a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 5a7f703c07..7f2a9e9097 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 5a7f703c07..7f2a9e9097 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 4cad432c61..2455ced52a 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index eefb737037..021a69a3c9 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 8401320d5c..487c124691 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 1b94cf2895..256a28124f 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index 00d23ffd55..11fe73a2fa 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 1d1c79ff8b..a171818c22 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h index acca19f0b8..db8ca4fbbe 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 65d3b647ae..7a56c8f640 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index 9ed804f366..041783f2e6 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index d1705430c5..5889d50479 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 6eddf90c7f..d3cf5f7b45 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 6eddf90c7f..d3cf5f7b45 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b86466666f..219995e378 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 4cb85b763f..f6476bc6d4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index a0f50ae18a..226434845b 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index c5df88df4e..3c4bd1023a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index f92df71cf4..540fdadbf4 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h index 111f18697c..a0c300c409 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index cdd1260622..62949cc097 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 2c60697f05..9777f5216e 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 2c60697f05..9777f5216e 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 0ffe9547fd..46626d595f 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 66aac51c70..6427e9990c 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 7dcaa81e2f..687f0b4862 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h index b050bf4630..85750decb5 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index bd063abde0..e293a5fc36 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 653ff2a1a8..0b283df7d8 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h index 748699615e..d3e56d0d82 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h index 945865cf20..65ec5a3a89 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h index d2ffee83ed..84fe953ba9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h index 6f2b989023..510945deb9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 3bd48dbae9..c5cf4d43d0 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 6f036d6468..b46f7340aa 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h index c77f59e7c7..67667ff09a 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h index 4c2bfa2ef2..6f7c1eda96 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index af2660185f..56b922869b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 848550d6bc..372c53e65c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 599bcc885c..eb72c10d84 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index a7413b6421..4957008b38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 4638847b35..5ddc0b26c5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index a7413b6421..4957008b38 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index cddca7353a..c87dae2b4e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 9bc0a10876..5afb53a1cb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 9bc0a10876..5afb53a1cb 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 4eefe42d32..0bec6a68fd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index c4b6a8f1d2..2fe8991aa7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index a0f50ae18a..226434845b 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index c5df88df4e..3c4bd1023a 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index bb8e6df55d..d5161fdff2 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index cdd1260622..62949cc097 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 9bf317b981..51c2b3aa9b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 9bf317b981..51c2b3aa9b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index c324475a11..a52be22f3c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 9bf317b981..51c2b3aa9b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 9bf317b981..51c2b3aa9b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 08e569743c..b03515336e 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -2007,7 +2007,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2260,7 +2260,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2301,7 +2301,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index a826bbac27..c4a06a558e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 9e828ed7a2..994d2b175a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 5a87d95a56..f87cdb5ea9 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 9b51601242..84d4a38a2b 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 4f3abae47c..5aacaa8ebb 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index e28d5b4a8a..d04c234298 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index 9410520f62..67f63ade1c 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index 078f5a9ba0..75fff16931 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 1a900d4b4b..71071aa766 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index df9902bd5a..671506f154 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 3b0e1b39a5..0acde2598c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index fd643c6d6b..80c9874a61 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 3207f19bbe..6f221cb037 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 1f69e17574..3e8e510349 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 6d122345f9..3232b64c86 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index a34189b99b..ced32bea6f 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -2011,7 +2011,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2265,7 +2265,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 1a900d4b4b..71071aa766 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 0b052a4b6e..5bac2b83b6 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d1246ee798..a793d79de4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d5021cdd1a..47d879371f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 5faba721b3..9544bbe36b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index dffe1baa4c..d699a56999 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index e5294a73dd..3fdf87d722 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index 8b0832d497..183e78fac2 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 65374e1d12..0f5baea691 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 0abfec0532..d936418198 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index af38ea9e8f..52b369e1cf 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index fb4b6ec8e6..3ad11530f8 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 35b0c40e80..10cea264e2 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 4210c69a2b..4ee398d104 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index 844487e0b3..09f7da2c3b 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 02461548be..7b9fe4337d 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 246f7e059f..4752b30b29 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 27ce654359..0191685b66 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index aa9f5b5d2b..0171a71ec6 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 043c2507e5..a4be39d5b4 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index f5f06cfe11..e0c1a99318 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 1f92dd4426..a21b23c535 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 7b055cc300..0698fdbce6 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 7b055cc300..0698fdbce6 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 30ebe3b187..58ea818de8 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 311d013ef2..b6d2f0c6b9 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h index 009248728b..05c2fe34ce 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration_adv.h @@ -2006,7 +2006,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2259,7 +2259,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2300,7 +2300,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 0c17b5ad76..eaf9485fd9 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 9c5083f5c1..def81760f0 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -2011,7 +2011,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2264,7 +2264,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2305,7 +2305,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 21457fdb16..34e33c5e28 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 21457fdb16..34e33c5e28 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index 08832f7d59..d10f2beaf8 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 5eec7d081a..b8c16d0a76 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 2d98262cc6..25cc5d2286 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 7a7e2c0ac8..21a9b01bb9 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 74c593d1d2..6bdd342f8e 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 770a55ae83..4f4e94444e 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 770a55ae83..4f4e94444e 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 7a7e2c0ac8..21a9b01bb9 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 770a55ae83..4f4e94444e 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 770a55ae83..4f4e94444e 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 92147c9cf2..fdf194331e 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 92147c9cf2..fdf194331e 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 92147c9cf2..fdf194331e 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index fd353a6e92..936299f25a 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index fd353a6e92..936299f25a 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index fd353a6e92..936299f25a 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 305bc9fce0..6871bc009e 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 1f92dd4426..a21b23c535 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index fd353a6e92..936299f25a 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 305bc9fce0..6871bc009e 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 819f75d423..5bf27861a0 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 1f92dd4426..a21b23c535 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index eac051d2de..10403eeb48 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index a6e387a310..bb9afb0c2b 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 7a7e2c0ac8..21a9b01bb9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 7a7e2c0ac8..21a9b01bb9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 90bf55f887..9fa930370e 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Hictop/3DP-17/Configuration_adv.h b/config/examples/Hictop/3DP-17/Configuration_adv.h index 697346f410..429831a0df 100644 --- a/config/examples/Hictop/3DP-17/Configuration_adv.h +++ b/config/examples/Hictop/3DP-17/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 9da878f765..059a4f5716 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 4cc98983ac..3eb18a25f3 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index a23f991498..bfe43fb87e 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -2014,7 +2014,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2267,7 +2267,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2308,7 +2308,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 305563a497..3935d42d23 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 452c59086e..eeebdf39ae 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -2014,7 +2014,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2267,7 +2267,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2308,7 +2308,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 6f7d427ca7..2e88574519 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 2a02071030..3641304c22 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 3b304b4d6a..fb6d5eecf2 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index d614fab8a9..44d7c58f0f 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index f62f0fc310..f43bfddfdc 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 6ed1ec3021..338fc17031 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 1373e5d09b..323775839c 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 64d8f4c36f..888f935b5e 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 68665a2d6a..a2899a4242 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 26b9c221d4..b86eb23b03 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index 08178855ce..293863cad6 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 9b03ffa9f6..190df33f55 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 8b9310d8d7..67a033fec3 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Materia101/Configuration_adv.h b/config/examples/Materia101/Configuration_adv.h index 19c65456eb..e5bbfe20e2 100644 --- a/config/examples/Materia101/Configuration_adv.h +++ b/config/examples/Materia101/Configuration_adv.h @@ -2006,7 +2006,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2259,7 +2259,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2300,7 +2300,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index beea451669..57ef537204 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 4b02034b1a..b44c7f3b59 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 3a1952b615..e41100359b 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 73726f7825..01fc97ac41 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 838b7e911a..d5736438b0 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 4f93f3246f..868366b2d8 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index 9305815fc7..9c2f79627b 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 4984496aef..01f0dc8c81 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index 9e0a93591b..dc034dd0f2 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -2007,7 +2007,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2260,7 +2260,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2301,7 +2301,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h index 2aa55cc215..a72963f089 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration_adv.h @@ -2007,7 +2007,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2260,7 +2260,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2301,7 +2301,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 691108e518..74e7ef687f 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - #define DOGM_SPI_DELAY_US 9 + #define DOGM_SPI_DELAY_US 9 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index c876433e53..7ce29e8ec5 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h index a10bf4f6c2..7c3ce96edf 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 4c7421ecd7..54fbcf4d9b 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 8fdcd577f0..243d7f336f 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 800 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 800 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 4a5be39018..fee160905d 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 261688e15f..a21a244694 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 1f92dd4426..a21b23c535 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index bf82823a93..7b8531a1fa 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index bf82823a93..7b8531a1fa 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index bf82823a93..7b8531a1fa 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 976d0fc72a..a6a971f04f 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h index 8d2a7be434..033fe25bb7 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index cc5d7ebd7b..3ef079e7c3 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index dfa62df192..ac4207de38 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index b98bb2b593..7728ab98d0 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 4ac85b838b..d2b20531ec 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 20d08c5884..02e76c78d1 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index ef831eef98..83b20b68dc 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 2f852974ec..41114a1b65 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index d2901f7dce..aae0e56aec 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index bdebab01aa..cba0098961 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 84bd0d31fb..dfdeaf5b37 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index e358e814c9..444ff395ba 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index ac2831a1b6..627fa80f02 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index ae448b2d87..f721d7aa92 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 45f8b116bb..7f9fc366b2 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index f5123bae20..886e9b0e18 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index 1922e4e86a..9b905e3144 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sovol/SV-06/Configuration_adv.h b/config/examples/Sovol/SV-06/Configuration_adv.h index 6c6e914a5d..66cf89d6e3 100644 --- a/config/examples/Sovol/SV-06/Configuration_adv.h +++ b/config/examples/Sovol/SV-06/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index ef0590341d..d11fa475f3 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 035d666c6d..1f215e7cc1 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index e1797b7cbb..9eb3921eb6 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 5ffc226bc5..9d3e30f1c4 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index bb40cdfcec..a4aef7ea48 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 8fc26d3287..f6c008a15a 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index c3eccf60f8..cd861e31f1 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 36579b8e9d..4292bf7ede 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 36579b8e9d..4292bf7ede 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 355b6735a4..a384489a67 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 48d36e06e0..0b24c90084 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 270d2b235a..637ef94545 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 8de9d74d4c..49e03221c9 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index f593b85c54..2cb938d949 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index c6a68d806b..6e9bd09f7a 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 45e338a7ae..6694e6ae08 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2265,7 +2265,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index a4d9826ac8..a80ff3cafb 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2265,7 +2265,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2306,7 +2306,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index ddfa3768ce..4b93e53aac 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index be6b628e97..b157aecc71 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 532fcede2b..d23bce279d 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 38cedecb48..44e6949fc8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 38cedecb48..44e6949fc8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 38cedecb48..44e6949fc8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h index 61bb9c8a60..569278ed16 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 2bd826d88f..45644cd2da 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -2014,7 +2014,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2267,7 +2267,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2308,7 +2308,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index a03326bc43..62e5200fd8 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -2014,7 +2014,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2267,7 +2267,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2308,7 +2308,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index ab43c08cb3..e6fecc003f 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 36ed9e017a..c3c1bd0521 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 4be522fce3..2230d4394c 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index de07b2ea4a..202df2e95a 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index f563e1e272..acaa531ac2 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index b977069fb8..7d02faf797 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 9833ed31e3..9155d1a7f3 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index 61e0ab0113..7e0db7e3dd 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -2006,7 +2006,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2259,7 +2259,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2300,7 +2300,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 3e6e2b8a75..9fb5c7afb7 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 8a189a3c25..6bce571a33 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -2021,7 +2021,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2274,7 +2274,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2315,7 +2315,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index ef489329f4..ae6a3d6917 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -2021,7 +2021,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2274,7 +2274,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2315,7 +2315,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index de9de840d5..27ae7b4ad5 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index de9de840d5..27ae7b4ad5 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3a800d46e7..a8e7b0d88f 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index f48cd8be25..83dbe67e77 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index c7c81f28da..2c74625178 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index a168f1b281..c76f194200 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index f48020d5ab..91fe298394 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index a1b2dbea04..d365e2ba0a 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2500 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2500 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 9e087957ef..9ef2ed41b3 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 9e087957ef..9ef2ed41b3 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 0cbcbd4480..b226ff69c8 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 6da0f2b942..f7fea7f04a 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index b24567fa8a..0422cb859e 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 493d20df5f..2aeb3e95cb 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 3f179e5daa..56d8831983 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index c033290dcb..7d2ca2c69f 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index a44fbf1448..15d4004e4f 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -2011,7 +2011,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2264,7 +2264,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2305,7 +2305,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 3cb9c48f10..21095c5993 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 3cb9c48f10..21095c5993 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index d3033a3068..e3c5d01a44 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 5249cecaf6..f4d7da330b 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index bf22ab49cb..a6cc342f2a 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 206ab4e432..35abbdb47b 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 206ab4e432..35abbdb47b 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 3d45a3754a..c38bc58727 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index d9eb19db2c..a0d8cbd6e5 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index d9eb19db2c..a0d8cbd6e5 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index d9eb19db2c..a0d8cbd6e5 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index d9eb19db2c..a0d8cbd6e5 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 7a092968ce..0f8492002d 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 59a48150d4..a59947d4bb 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 7169fd1a19..699c8a669f 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 952b285e24..5d0798d793 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 9004d05279..b3f048c4f1 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index 1f2cf4e148..a5dee82fbb 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -2010,7 +2010,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2263,7 +2263,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2304,7 +2304,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 3d45a3754a..c38bc58727 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 96ecf269d9..1dda21d61f 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index 7a60c4cbf1..9b413e103d 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index b25a97b7d8..3b3762f6ce 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -2009,7 +2009,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2262,7 +2262,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2303,7 +2303,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index f79ae91371..f3244c0703 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 0d96bd7524..8d057556a8 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index 51685e5127..b0841d293b 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 1cbd291293..9d1aed810d 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 3183fddb75..0ca34b11ee 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -2008,7 +2008,7 @@ #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + //#define DOGM_SPI_DELAY_US 5 // (µs) Delay after each SPI transfer //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -2261,7 +2261,7 @@ // ADC Button Debounce // #if HAS_ADC_BUTTONS - #define ADC_BUTTON_DEBOUNCE_DELAY 16 // Increase if buttons bounce or repeat too fast + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (count) Increase if buttons bounce or repeat too fast #endif // @section safety @@ -2302,7 +2302,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1250 // (ms) Maximum interval between clicks. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on double-click when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE)