mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-02 11:34:02 -06:00
Examples Customizations
This commit is contained in:
GitHub Actions
parent
9a8479140a
commit
bbc39d4639
768 changed files with 45817 additions and 33156 deletions
|
|
@ -1,6 +1,6 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "MakerTech3D/Proforge2sDual"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -61,16 +63,19 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(MarlinFirmware)" // Original author or contributor.
|
||||
#define STRING_CONFIG_H_AUTHOR "(FM for the Makertech 3D Profoge 2s Dual)" // Original author or contributor.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MKS_GEN_L
|
||||
#endif
|
||||
|
||||
// The ProForge 2s Dual uses an alternative Z Min Pin
|
||||
#define Z_MIN_PIN 63 // Y_CS_PIN on MKS Gen-L
|
||||
|
||||
// @section serial
|
||||
|
||||
/**
|
||||
|
|
@ -135,7 +140,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "Proforge 2s Dual"
|
||||
//#define CONFIGURABLE_MACHINE_NAME // Add G-code M550 to set/report the machine name
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
|
|
@ -159,8 +164,8 @@
|
|||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC2240', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
#define X_DRIVER_TYPE A4988
|
||||
#define Y_DRIVER_TYPE A4988
|
||||
#define X_DRIVER_TYPE TMC2100
|
||||
#define Y_DRIVER_TYPE TMC2100
|
||||
#define Z_DRIVER_TYPE A4988
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
|
|
@ -174,7 +179,7 @@
|
|||
//#define V_DRIVER_TYPE A4988
|
||||
//#define W_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
//#define E4_DRIVER_TYPE A4988
|
||||
|
|
@ -228,7 +233,7 @@
|
|||
|
||||
// This defines the number of extruders
|
||||
// :[0, 1, 2, 3, 4, 5, 6, 7, 8]
|
||||
#define EXTRUDERS 1
|
||||
#define EXTRUDERS 2
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
|
@ -260,11 +265,11 @@
|
|||
* A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles.
|
||||
* Can be combined with SWITCHING_EXTRUDER.
|
||||
*/
|
||||
//#define SWITCHING_NOZZLE
|
||||
#define SWITCHING_NOZZLE
|
||||
#if ENABLED(SWITCHING_NOZZLE)
|
||||
#define SWITCHING_NOZZLE_SERVO_NR 0
|
||||
#define SWITCHING_NOZZLE_SERVO_NR 3
|
||||
//#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
|
||||
#define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // A pair of angles for { E0, E1 }.
|
||||
#define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 100 } // A pair of angles for { E0, E1 }.
|
||||
// For Dual Servo use two pairs: { { lower, raise }, { lower, raise } }
|
||||
#define SWITCHING_NOZZLE_SERVO_DWELL 2500 // Dwell time to wait for servo to make physical move
|
||||
#define SWITCHING_NOZZLE_LIFT_TO_PROBE // Lift toolheads out of the way while probing
|
||||
|
|
@ -384,8 +389,8 @@
|
|||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_Y { 0.0, -19.00 } // (mm) relative Y-offset for each nozzle
|
||||
#define HOTEND_OFFSET_Z { 0.0, 1.3 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section multi-material
|
||||
|
||||
|
|
@ -576,7 +581,7 @@
|
|||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_1 1
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
|
|
@ -663,15 +668,15 @@
|
|||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
// (Use MINTEMP for thermistor short/failure protection.)
|
||||
#define HEATER_0_MAXTEMP 275
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_0_MAXTEMP 280
|
||||
#define HEATER_1_MAXTEMP 280
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 120
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
|
||||
/**
|
||||
|
|
@ -717,9 +722,9 @@
|
|||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||
#else
|
||||
#define DEFAULT_Kp 22.20
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114.00
|
||||
#define DEFAULT_Kp 18.48
|
||||
#define DEFAULT_Ki 1.13
|
||||
#define DEFAULT_Kd 75.3
|
||||
#endif
|
||||
#else
|
||||
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
|
||||
|
|
@ -937,7 +942,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 700
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -1188,7 +1193,7 @@
|
|||
// @section endstops
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
#define ENDSTOPPULLUPS
|
||||
//#define ENDSTOPPULLUPS
|
||||
#if DISABLED(ENDSTOPPULLUPS)
|
||||
// Disable ENDSTOPPULLUPS to set pullups individually
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
|
|
@ -1307,7 +1312,7 @@
|
|||
* Override with M92 (when enabled below)
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
|
||||
|
||||
/**
|
||||
* Enable support for M92. Disable to save at least ~530 bytes of flash.
|
||||
|
|
@ -1319,7 +1324,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 150 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -1332,7 +1337,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 2000, 100, 10000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1347,9 +1352,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1361,10 +1366,10 @@
|
|||
*/
|
||||
//#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_XJERK 3.0
|
||||
#define DEFAULT_YJERK 3.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
#define DEFAULT_EJERK 5.0
|
||||
#define DEFAULT_EJERK 10.0
|
||||
//#define DEFAULT_IJERK 0.3
|
||||
//#define DEFAULT_JJERK 0.3
|
||||
//#define DEFAULT_KJERK 0.3
|
||||
|
|
@ -1455,7 +1460,7 @@
|
|||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
* (e.g., an inductive probe or a nozzle-based probe-switch.)
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Use the nozzle as the probe, as with a conductive
|
||||
|
|
@ -1666,7 +1671,7 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 45, 19, -3 }
|
||||
|
||||
// Enable and set to use a specific tool for probing. Disable to allow any tool.
|
||||
#define PROBING_TOOL 0
|
||||
|
|
@ -1734,7 +1739,7 @@
|
|||
* A total of 2 does fast/slow probes with a weighted average.
|
||||
* A total of 3 or more adds more slow probes, taking the average.
|
||||
*/
|
||||
//#define MULTIPLE_PROBING 2
|
||||
#define MULTIPLE_PROBING 2
|
||||
//#define EXTRA_PROBING 1
|
||||
|
||||
/**
|
||||
|
|
@ -1838,9 +1843,9 @@
|
|||
// @section motion
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
|
@ -1882,8 +1887,8 @@
|
|||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define X_HOME_DIR 1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
//#define I_HOME_DIR -1
|
||||
//#define J_HOME_DIR -1
|
||||
|
|
@ -1910,16 +1915,16 @@
|
|||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define X_BED_SIZE 300
|
||||
#define Y_BED_SIZE 200
|
||||
|
||||
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define X_MIN_POS -30
|
||||
#define Y_MIN_POS -20
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Y_MAX_POS 222
|
||||
#define Z_MAX_POS 250
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -1992,7 +1997,7 @@
|
|||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
||||
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
|
|
@ -2036,7 +2041,7 @@
|
|||
// Commands to execute on filament runout.
|
||||
// With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c")
|
||||
// NOTE: After 'M412 H1' the host handles filament runout and this script does not apply.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600 T%c"
|
||||
|
||||
// After a runout is detected, continue printing this length of filament
|
||||
// before executing the runout script. Useful for a sensor at the end of
|
||||
|
|
@ -2135,7 +2140,7 @@
|
|||
*/
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
|
|
@ -2234,13 +2239,13 @@
|
|||
|
||||
// Beyond the probed grid, continue the implied tilt?
|
||||
// Default is to maintain the height of the nearest edge.
|
||||
//#define EXTRAPOLATE_BEYOND_GRID
|
||||
#define EXTRAPOLATE_BEYOND_GRID
|
||||
|
||||
//
|
||||
// Subdivision of the grid by Catmull-Rom method.
|
||||
// Synthesizes intermediate points to produce a more detailed mesh.
|
||||
//
|
||||
//#define ABL_BILINEAR_SUBDIVISION
|
||||
#define ABL_BILINEAR_SUBDIVISION
|
||||
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
|
||||
// Number of subdivisions between probe points
|
||||
#define BILINEAR_SUBDIVISIONS 3
|
||||
|
|
@ -2256,7 +2261,7 @@
|
|||
|
||||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
||||
#define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
|
|
@ -2377,11 +2382,11 @@
|
|||
* - Allows Z homing only when XY positions are known and trusted.
|
||||
* - If stepper drivers sleep, XY homing may be required again before Z homing.
|
||||
*/
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
|
||||
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // (mm) Y point for Z homing
|
||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // (mm) X point for Z homing
|
||||
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // (mm) Y point for Z homing
|
||||
//#define Z_SAFE_HOMING_POINT_ABSOLUTE // Ignore home offsets (M206) for Z homing position
|
||||
#endif
|
||||
|
||||
|
|
@ -3206,7 +3211,7 @@
|
|||
//#define SAV_3DGLCD
|
||||
#if ENABLED(SAV_3DGLCD)
|
||||
#define U8GLIB_SSD1306
|
||||
//#define U8GLIB_SH1106
|
||||
#define U8GLIB_SH1106
|
||||
#endif
|
||||
|
||||
//
|
||||
|
|
@ -3731,12 +3736,12 @@
|
|||
* Set this manually if there are extra servos needing manual control.
|
||||
* Set to 0 to turn off servo support.
|
||||
*/
|
||||
//#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
|
||||
#define NUM_SERVOS 4 // Note: Servo index starts with 0 for M280-M282 commands
|
||||
|
||||
// (ms) Delay before the next move will start, to give the servo time to reach its target angle.
|
||||
// 300ms is a good value but you can try less delay.
|
||||
// If the servo can't reach the requested position, increase it.
|
||||
#define SERVO_DELAY { 300 }
|
||||
#define SERVO_DELAY { 300, 300, 300, 1000 }
|
||||
|
||||
// Only power servos during movement, otherwise leave off to prevent jitter
|
||||
//#define DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue