3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-08 22:35:18 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Bring configs up to date, clean up

Browse source
This commit is contained in:
Scott Lahteine 2020-07-06 00:48:16 -05:00
parent bf072075f6
commit baafcf125f
312 changed files with 382 additions and 10742 deletions
Download patch file Download diff file Expand all files Collapse all files

11
config/examples/gCreate/gMax1.5+/Configuration.h
View file

@ -131,11 +131,10 @@
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
//#define MOTHERBOARD BOARD_RAMPS_14_EEF
#define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and
// I use Marlin to control the bed's temperature. So, if you have a single nozzle
// machine, this will work fine for you. You just set the
// #define TEMP_SENSOR_BED 75 to 0 down below so Marlin doesn't mess with the bed
// temp.
#define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and
// use Marlin to control the bed temperature. So, if you have a single nozzle
// machine, this will work fine for you. Just set the TEMP_SENSOR_BED to 0 down
// below so Marlin doesn't mess with the bed temp.
#endif
// Name displayed in the LCD "Ready" message and Info menu
@ -1541,7 +1540,7 @@
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
#endif
/**

1
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -759,6 +759,7 @@
#define Z_STEPPER_ALIGN_AMP 1.0 // Use a value > 1.0 NOTE: This may cause instability!
#endif
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this