3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-08 07:27:44 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Disable slave overrides by default

Browse source
This commit is contained in:
Scott Lahteine 2020-12-19 15:54:37 -06:00
parent 0172fb99d0
commit b8771fe908
213 changed files with 3356 additions and 3356 deletions
Download patch file Download diff file Expand all files Collapse all files

32
config/default/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -2475,22 +2475,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -2474,22 +2474,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -2475,22 +2475,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A6/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A8/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/A9/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/E10/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -2472,22 +2472,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -2472,22 +2472,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/ArmEd/Configuration_adv.h
View file

@ -2477,22 +2477,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Artillery/Genius/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BIQU/B1-BLTouch/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -2481,22 +2481,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Cartesio/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -2476,22 +2476,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-20/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -2474,22 +2474,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
View file

@ -2474,22 +2474,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3 V2/Configuration_adv.h
View file

@ -2474,22 +2474,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
View file

@ -2467,22 +2467,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 1 #define Y_SLAVE_ADDRESS 1
#define Z_SLAVE_ADDRESS 2 #define Z_SLAVE_ADDRESS 2
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 1 #define Y_SLAVE_ADDRESS 1
#define Z_SLAVE_ADDRESS 2 #define Z_SLAVE_ADDRESS 2
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 1 #define Y_SLAVE_ADDRESS 1
#define Z_SLAVE_ADDRESS 2 #define Z_SLAVE_ADDRESS 2
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 1 #define Y_SLAVE_ADDRESS 1
#define Z_SLAVE_ADDRESS 2 #define Z_SLAVE_ADDRESS 2
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Plus/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h
View file

@ -2477,22 +2477,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 2 #define Y_SLAVE_ADDRESS 2
#define Z_SLAVE_ADDRESS 1 #define Z_SLAVE_ADDRESS 1
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Daycom/3DP-100/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/Einstart-S/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

24
config/examples/FYSETC/AIO_II/Configuration_adv.h
View file

@ -2476,19 +2476,19 @@
#define X_SLAVE_ADDRESS 0 #define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 1 #define Y_SLAVE_ADDRESS 1
#define Z_SLAVE_ADDRESS 2 #define Z_SLAVE_ADDRESS 2
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 3 #define E0_SLAVE_ADDRESS 3
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

32
config/examples/FYSETC/F6_13/Configuration_adv.h
View file

@ -2473,22 +2473,22 @@
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
* on the same serial port, either here or in your board's pins file. * on the same serial port, either here or in your board's pins file.
*/ */
#define X_SLAVE_ADDRESS 0 //#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0 //#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0 //#define Z_SLAVE_ADDRESS 0
#define X2_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0
#define Y2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0
#define Z2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0
#define Z3_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0
#define Z4_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0
#define E0_SLAVE_ADDRESS 0 //#define E0_SLAVE_ADDRESS 0
#define E1_SLAVE_ADDRESS 0 //#define E1_SLAVE_ADDRESS 0
#define E2_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0
#define E3_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0
#define E4_SLAVE_ADDRESS 0 //#define E4_SLAVE_ADDRESS 0
#define E5_SLAVE_ADDRESS 0 //#define E5_SLAVE_ADDRESS 0
#define E6_SLAVE_ADDRESS 0 //#define E6_SLAVE_ADDRESS 0
#define E7_SLAVE_ADDRESS 0 //#define E7_SLAVE_ADDRESS 0
/** /**
* Software enable * Software enable

Some files were not shown because too many files have changed in this diff Show more