diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index c7c175781c..882bcef245 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index a43788b958..89063e9a55 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
index 5c9488fb52..ec73bfffbb 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 400, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
index 90bb172e40..86b9d9a828 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
index b96f6f0b50..c33d8f6e13 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1311,11 +1311,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index fdb9fa70a0..8997d104cb 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -1312,11 +1312,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 2af7d4fcef..191808fcc1 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 160.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 099d945b85..0b2eb6da86 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200, 355 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 5083e261f0..2d3fc9dbff 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 7e2dfbbfd5..c55cf5b206 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 29fac73d92..cdc27b1de0 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -1243,12 +1243,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT     { 100, 100, 400, 95 }
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   {  80,  80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 63440eec50..df1248344a 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 1d955aeff2..2b9fc3382e 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h
index fec925af2b..72ce121e74 100644
--- a/config/examples/Anet/A9/Configuration.h
+++ b/config/examples/Anet/A9/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95.5 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
index 4308807fee..2e23beef1e 100644
--- a/config/examples/Anet/E10/Configuration.h
+++ b/config/examples/Anet/E10/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
index aabc5e2f99..d06954c8c2 100644
--- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h	
+++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h	
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h
index 59e618b097..9cf19ab9c8 100644
--- a/config/examples/Anet/E16/Stock/Configuration.h
+++ b/config/examples/Anet/E16/Stock/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h
index 08ce7d381e..ec10076c40 100644
--- a/config/examples/Anet/ET4+/Configuration.h
+++ b/config/examples/Anet/ET4+/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h
index 00cf50baed..66f19be03f 100644
--- a/config/examples/Anet/ET4-Pro/Configuration.h
+++ b/config/examples/Anet/ET4-Pro/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h
index 73ada83ba3..e85a26ddf0 100644
--- a/config/examples/Anet/ET4/Configuration.h
+++ b/config/examples/Anet/ET4/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h
index 3d35d58656..a47be578ea 100644
--- a/config/examples/Anet/ET4X/Configuration.h
+++ b/config/examples/Anet/ET4X/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h
index 855e70b8fc..04394e7c52 100644
--- a/config/examples/Anet/ET5-Pro/Configuration.h
+++ b/config/examples/Anet/ET5-Pro/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h
index e7af166015..0f6d2a253c 100644
--- a/config/examples/Anet/ET5/Configuration.h
+++ b/config/examples/Anet/ET5/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h
index 88eecd3b76..873e443891 100644
--- a/config/examples/Anet/ET5X/Configuration.h
+++ b/config/examples/Anet/ET5X/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h
index f140f8ac37..317bc31353 100644
--- a/config/examples/AnyCubic/Chiron/Configuration.h
+++ b/config/examples/AnyCubic/Chiron/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 100, 400, 405 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
index 1c450e78d5..b7e806e77f 100644
--- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h	
+++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
index 2d3818e785..27341e18b6 100644
--- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h	
+++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 385 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
index e15266aa84..d0a49acf57 100644
--- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h	
+++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 385 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h
index 081874af74..cabfd7df8b 100644
--- a/config/examples/AnyCubic/Vyper/Configuration.h
+++ b/config/examples/AnyCubic/Vyper/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 100, 400, 407 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
index 7eeba25c05..395fa4164f 100644
--- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h	
+++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h	
@@ -1281,7 +1281,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(I3MEGA_PRO_STOCK)
@@ -1292,6 +1292,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96.2 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
index d020231db9..6306698d74 100644
--- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h	
+++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h	
@@ -1252,11 +1252,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96.2 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 99a0b09b95..3a1806b91f 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96.2 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 4002ba6c7f..d6dcd44149 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 156.84 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h
index c6617077c3..d484a50f92 100644
--- a/config/examples/Artillery/Genius Pro/Configuration.h	
+++ b/config/examples/Artillery/Genius Pro/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h
index fb59021f0c..39b9246272 100644
--- a/config/examples/Artillery/Genius/BLTouch/Configuration.h
+++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h
index f7042650dc..f6dcd99fd3 100644
--- a/config/examples/Artillery/Genius/V1/Configuration.h
+++ b/config/examples/Artillery/Genius/V1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h
index a60e9be36a..048e92af3e 100644
--- a/config/examples/Artillery/Hornet/Configuration.h
+++ b/config/examples/Artillery/Hornet/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
index c89df38930..c624f16ad0 100644
--- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h	
+++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h	
@@ -1257,12 +1257,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // use 838 for BMG extruder mated to LDO Motors .9 degree stepper with stock microstepping at 15bits
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 838 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h
index 8d03431e66..9541f7e471 100644
--- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h	
+++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h
index ab0b1996de..a80b27aa07 100644
--- a/config/examples/Artillery/Sidewinder X2/Configuration.h	
+++ b/config/examples/Artillery/Sidewinder X2/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 445 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 35a8a17a03..76067a4adb 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 01fe8cc7fb..f154020dcc 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 400}
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 6db5aa6066..1ceadeb92a 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 93.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h
index 0992996f65..f865e7c002 100644
--- a/config/examples/BIQU/B1 SE Plus/Configuration.h	
+++ b/config/examples/BIQU/B1 SE Plus/Configuration.h	
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h
index 6fba852f2e..9b5ffff2d9 100644
--- a/config/examples/BIQU/B1 SE/Configuration.h	
+++ b/config/examples/BIQU/B1 SE/Configuration.h	
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h
index 761cb3d607..e2fbebec57 100644
--- a/config/examples/BIQU/B1/Configuration.h
+++ b/config/examples/BIQU/B1/Configuration.h
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h
index 658e220ecb..bea4d9469a 100644
--- a/config/examples/BIQU/BX/Configuration.h
+++ b/config/examples/BIQU/BX/Configuration.h
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80*2, 80*2, 400*2, 910 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h
index 8d8fa64e32..db943c9438 100644
--- a/config/examples/BIQU/Hurakan/Configuration.h
+++ b/config/examples/BIQU/Hurakan/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h
index 4a023fdd88..988e565906 100644
--- a/config/examples/BIQU/Thunder Standard/Configuration.h	
+++ b/config/examples/BIQU/Thunder Standard/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 2f8b6e2050..2a458e266d 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100.47095761381482 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index fd88fd335a..0e733f6978 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1256,11 +1256,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 8000, 218.77 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 8665225b5f..b4740d4677 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 600.0*8/3, 102.073 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h
index 02e0753260..055a68ee81 100644
--- a/config/examples/CTC/A13/Configuration.h
+++ b/config/examples/CTC/A13/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h
index 00beefb904..b781a2d3da 100644
--- a/config/examples/CTC/Bizer/Configuration.h
+++ b/config/examples/CTC/Bizer/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
index faeaac312d..c95b7f3f7a 100644
--- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h	
+++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index d03f48c8e5..6559835d7c 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -1258,11 +1258,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.128, 71.128, 640, 152 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h
index b7c4b9784b..b0ac41784b 100644
--- a/config/examples/Copymaster3D/300/Configuration.h
+++ b/config/examples/Copymaster3D/300/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 94, 94, 400, 96 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h
index 824daef495..23102730bc 100644
--- a/config/examples/Copymaster3D/400/Configuration.h
+++ b/config/examples/Copymaster3D/400/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 94, 94, 400, 96 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h
index ec1112774a..67b52642ef 100644
--- a/config/examples/Copymaster3D/500/Configuration.h
+++ b/config/examples/Copymaster3D/500/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 94, 94, 400, 96 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h
index a1e73eeaa5..9c79fbef32 100644
--- a/config/examples/Creality/CR-10 Max/Configuration.h	
+++ b/config/examples/Creality/CR-10 Max/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h
index 8897595a19..a5bab695dc 100644
--- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1250,11 +1250,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h
index 52e7453227..5f2696f834 100644
--- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h	
+++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h	
@@ -1250,11 +1250,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
index 6abf38f001..8526d35738 100644
--- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h	
+++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h	
@@ -1251,11 +1251,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.60, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
index e2fcb0f976..ad649d386c 100644
--- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h	
+++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 100, 97.5 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
index dd7a2f72f1..5092326567 100644
--- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h	
+++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h	
@@ -1242,12 +1242,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // Stock Creality
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // Creality with Bondtech extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h
index 19acdb8bb6..d7040f1831 100644
--- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h	
+++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h	
@@ -1242,12 +1242,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // Stock Creality
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // Creality with Bondtech extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h
index 56146f279a..b5f426faed 100644
--- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h	
+++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h	
@@ -1241,12 +1241,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // with Bondtech extruder
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // with stock extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
index 2f3a96aac0..984cd6065f 100644
--- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h	
+++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h	
@@ -1242,12 +1242,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // Stock Creality
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // Creality with Bondtech extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h
index 4c55d940b7..7a30cb1efe 100644
--- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h	
+++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h	
@@ -1243,12 +1243,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // Stock Creality
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // Creality with Bondtech extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h
index ed09723f03..79ef1d89f4 100644
--- a/config/examples/Creality/CR-10 V2/Configuration.h	
+++ b/config/examples/Creality/CR-10 V2/Configuration.h	
@@ -1251,11 +1251,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h
index 14f655e6c3..0982d9b1d5 100644
--- a/config/examples/Creality/CR-10 V3/Configuration.h	
+++ b/config/examples/Creality/CR-10 V3/Configuration.h	
@@ -1251,12 +1251,17 @@
 
 /**
  * Default Axis Steps Per Unit (steps/mm)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  * Updated E Steps to 382.14 for CR-10 V3 Direct Drive
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.00, 80.00, 400.00, 407 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
index c1159aa7c3..4782bed160 100644
--- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h
index 24bd977043..40a45e2cc5 100644
--- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h	
+++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h
index e934c50247..4856f04786 100644
--- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h
+++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h
index 1f64de8415..94da7d7028 100644
--- a/config/examples/Creality/CR-10S Pro/Configuration.h	
+++ b/config/examples/Creality/CR-10S Pro/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h
index d1ab2a048a..e5ecadd12b 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h
index 8850a485f2..fd2ed70117 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
index da94e520f7..d11476f070 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h
index 90ef6090dc..4c58bcfd99 100644
--- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h	
+++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h
index a6f9394b4a..e9c31a333a 100644
--- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h
+++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index 4bc0015070..a979b47c83 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h
index be3dfc4fd0..dc9fd4b4f4 100644
--- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h	
+++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 194 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h
index 32d1bd1b82..b10b4004dc 100644
--- a/config/examples/Creality/CR-20/Stock/Configuration.h
+++ b/config/examples/Creality/CR-20/Stock/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h
index c7bdf0427f..8e526b33a6 100644
--- a/config/examples/Creality/CR-30 PrintMill/Configuration.h	
+++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 1152.95, 137.65 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h
index 063b92c668..cc8008b1fd 100644
--- a/config/examples/Creality/CR-6 SE/Configuration.h	
+++ b/config/examples/Creality/CR-6 SE/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index a3b828e529..2fc7944293 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.60 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h
index 021c015eef..1c77057bdf 100644
--- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h	
+++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 12b331ea13..b974e59cd3 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/Configuration.h
index 73969e25a3..38a21d9ab7 100644
--- a/config/examples/Creality/Ender-3 Max Neo/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Max Neo/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.08, 80.17, 400, 101.30 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h
index 9fbe008683..06489f02c8 100644
--- a/config/examples/Creality/Ender-3 Max/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Max/Configuration.h	
@@ -1244,13 +1244,18 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 
 // Creality Stock Extruder
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h
index 4780f5a334..0377f40598 100644
--- a/config/examples/Creality/Ender-3 Neo/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Neo/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h
index 2de56acf76..7509607214 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 141 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
index 46b4ed1d82..b4e45e7420 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
index d95019e693..e35660c2b2 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
index ebabddcfda..9babd9bd4e 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h
index 2ee2aefecc..4370dc62c5 100644
--- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
index 6503c01e82..977bd89e2c 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
index da2484185f..5adecf58d2 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h
index 1216477a1f..35a2ee0630 100644
--- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h	
+++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h
index baab102f52..4078846a48 100644
--- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h	
+++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 424.9 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h
index 9ed17e3a41..f6be8b0404 100644
--- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h	
+++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 424.9 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h
index 390a1fe92a..1f38b53452 100644
--- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h	
+++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h
index 889e8eb5c2..eb393a3a1f 100644
--- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h	
+++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h
index 3ce045d17e..42b507ad94 100644
--- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h
index 7324a3b16c..32967d21a4 100644
--- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h
index 301683d4b5..0a1c6d55a3 100644
--- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h
index 0c96dc38bd..c3c7e7d912 100644
--- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h
index 86a14878a8..e02e426eac 100644
--- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h
index aea3401935..ba26425293 100644
--- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h
index be5c7a8607..ecd8217278 100644
--- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h	
+++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h
index 27ce9da715..33b0553b3d 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h
index a7a94f814d..faa8f77111 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h
index 0b1b00877a..817cc44cf3 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h
index f466f2f67f..802857d18b 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h
index fe1ca89c6d..1519eee426 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h
index 34cd94b3f8..9d5c8ffcab 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h
index d1958e5730..230c41727e 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h
index 5cec580680..6ef6d61e68 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h
index 0d11feee63..ec5db45236 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h
index d8016f0f1b..df172195a0 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h
index cdfb330897..fc4c3c6e77 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
index 2087a51299..70591b2200 100644
--- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
+++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h
index ed7d99d4e9..bf315be67a 100644
--- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h
+++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h
index b3da24421e..28876955c0 100644
--- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h
+++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h
index da27827b4a..9eb1056579 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h
index df2a46d4e2..b01f08d2bb 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h
index 3a498cad83..35a3c617ea 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h
index d2b4184244..a929485375 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h
index 7238f424ec..2e4a28f877 100644
--- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h	
+++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
index cac6d956c7..de2eb66b1c 100644
--- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
+++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 100, 97.5 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h
index 2fe8a9495e..fa91d630aa 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h
index f64f09e2b3..ffb451e274 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h
index 8b4488987a..b54dad2e07 100644
--- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h	
+++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h
index 13e7d709f3..8cf413d38e 100644
--- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h	
+++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index a4a4e533b9..554fc64cd0 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT    { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h
index 9d2908dc75..53584f83ae 100644
--- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93.02 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h
index 8fd62ad6ec..7c5b51d68d 100644
--- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h	
@@ -1250,12 +1250,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // E steps example: steps per revolution s=200, microstepping m=16, effective gear diameter d=10.95: sm/(πd) = 93.02
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93.02 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h
index 9e06da1756..33d60b0ade 100644
--- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h	
@@ -1250,12 +1250,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // E steps example: steps per revolution s=200, microstepping m=16, effective gear diameter d=10.95: sm/(πd) = 93.02
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93.02 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h
index 9aa662db0b..a949628ec6 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h	
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
index 7bb1d4cf04..c950d1ba06 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h
index 4b9395946c..c1b843c06f 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h
index 88902d5b63..f556354115 100644
--- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h
index f99d5d8c1b..1e0a09cf0c 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h
index 83fe523e42..cfe106854f 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h	
@@ -1250,7 +1250,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(ENDER5_USE_MICROSWISS)
@@ -1259,6 +1259,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h
index 7e5a408d4c..adbc8def5c 100644
--- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h	
+++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h
index 61a202ede7..e54212f8af 100644
--- a/config/examples/Creality/Ender-5 S1/Configuration.h	
+++ b/config/examples/Creality/Ender-5 S1/Configuration.h	
@@ -1258,11 +1258,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 409.50 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h
index 47d4b76146..cd3d3d885b 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h
index 73a2340fde..7b7da6807b 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h
index baf3e11977..b80c644830 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h
index 8c30c667e1..b445830048 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h
index 54d3114060..a0191fb37a 100644
--- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h	
+++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h
index 66723fad48..7967aeb9e5 100644
--- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h
+++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h
index c3748e573c..fc35691a85 100644
--- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h
+++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h
index 0c47b4a1d0..7f9a426dd0 100644
--- a/config/examples/Creality/Ender-6/Configuration.h
+++ b/config/examples/Creality/Ender-6/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index a1095ebc51..68fb27b467 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 196 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h
index 793082e4a3..6ec0f8d2b1 100644
--- a/config/examples/Daycom/3DP-100/Configuration.h
+++ b/config/examples/Daycom/3DP-100/Configuration.h
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 94.3 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h
index a87918ae94..387fcede6d 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h
index 4d9e52ff77..cc276216c1 100644
--- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h
+++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 606, 606, 1167, 1140 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 59ded539d0..52f5e2562c 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -1247,11 +1247,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 96.337120 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h
index 04a4bbd584..226bcfdf80 100644
--- a/config/examples/Elegoo/Neptune 2/Configuration.h	
+++ b/config/examples/Elegoo/Neptune 2/Configuration.h	
@@ -1280,7 +1280,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 
@@ -1299,6 +1299,11 @@
 #endif
 
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h
index 4b92fbc624..ec3e923621 100644
--- a/config/examples/Eryone/Thinker SE/Configuration.h	
+++ b/config/examples/Eryone/Thinker SE/Configuration.h	
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h
index deceab2f7b..9b02ffbc49 100644
--- a/config/examples/Eryone/Thinker V2/Configuration.h	
+++ b/config/examples/Eryone/Thinker V2/Configuration.h	
@@ -1250,11 +1250,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index 9ff9318538..f43d3b9043 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 640, 640, 3200, 800 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index ca817977c7..2f55c7810b 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1280, 1280, 6400, 1600 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h
index d3ac305aaf..3c9cf3399f 100644
--- a/config/examples/FYSETC/S6/Configuration.h
+++ b/config/examples/FYSETC/S6/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 400 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index d91967b78f..357e7a7075 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h
index 268477c0a6..bc5b39f503 100644
--- a/config/examples/Felix/Single/Configuration.h
+++ b/config/examples/Felix/Single/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h
index eb3f8a7ad6..6d70529440 100644
--- a/config/examples/FlashForge/Creator 2X/Configuration.h	
+++ b/config/examples/FlashForge/Creator 2X/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index e2c60a5dc8..cf1684d571 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h
index 6d34e621c3..83a691e83e 100644
--- a/config/examples/FlyingBear/P902/Configuration.h
+++ b/config/examples/FlyingBear/P902/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.29, 100.42, 802.4, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h
index 2c80e550d8..df031f0f81 100644
--- a/config/examples/FlyingBear/P905H/Configuration.h
+++ b/config/examples/FlyingBear/P905H/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 800, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h
index d05511243a..6eea1a179d 100644
--- a/config/examples/FoamCutter/generic/Configuration.h
+++ b/config/examples/FoamCutter/generic/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1066, 1066, 1066, 1066, 1066 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h
index 09ed41d753..e3166efacd 100644
--- a/config/examples/FoamCutter/rcKeith/Configuration.h
+++ b/config/examples/FoamCutter/rcKeith/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1066, 1066, 1066, 1066, 1066 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h
index 9d2c9ac858..154e0500bb 100644
--- a/config/examples/FolgerTech/FT-5 R2/Configuration.h	
+++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index c84b278e04..15c37877c3 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1243,12 +1243,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 52.2 }  // 52.4 is correct for printer as shipped
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 104.4 }   // 104.4 with 32 micro steps enabled gives better results
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 444dfea03d..50ab4e2bb9 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -1301,7 +1301,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(Y_2208)
@@ -1310,6 +1310,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 96 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 11ce0f0e3a..952f7c93b1 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 160, 1600, (93*2) }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 79b0ddc71b..5f4cab8f79 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -1246,12 +1246,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 160, 1600, 93 }
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index faf05e3cd2..245e6dff39 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h
index f465db1735..ebe25e1514 100644
--- a/config/examples/Geeetech/A10D/Configuration.h
+++ b/config/examples/Geeetech/A10D/Configuration.h
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h
index 6cbd65679c..ea518922fc 100644
--- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h	
+++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h
index 07e60b1b33..8436ca8c61 100644
--- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h
+++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h
index 3df3e61331..22de12f584 100644
--- a/config/examples/Geeetech/A10PRO/Configuration.h
+++ b/config/examples/Geeetech/A10PRO/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h
index 415beb1627..b2d0ddb266 100644
--- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h	
+++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h
index e08b6c2319..fc18156959 100644
--- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h
+++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h
index 17ccded662..e3994e4693 100644
--- a/config/examples/Geeetech/A20/Configuration.h
+++ b/config/examples/Geeetech/A20/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 5faa1417f0..86f9e908a0 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h
index 380b5a108d..7b368e9ec2 100644
--- a/config/examples/Geeetech/A20T/Configuration.h
+++ b/config/examples/Geeetech/A20T/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h
index e09388294a..00ca1dd4d4 100644
--- a/config/examples/Geeetech/A30/Configuration.h
+++ b/config/examples/Geeetech/A30/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h
index 7c8c24e317..8d58cfd7bb 100644
--- a/config/examples/Geeetech/A30M/Configuration.h
+++ b/config/examples/Geeetech/A30M/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h
index cbe7cb8326..59e36f7f4d 100644
--- a/config/examples/Geeetech/A30T/Configuration.h
+++ b/config/examples/Geeetech/A30T/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h
index 312d6f7422..47c7f211d1 100644
--- a/config/examples/Geeetech/D200/Configuration.h
+++ b/config/examples/Geeetech/D200/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h
index 599a57fd5d..0cf6676c8d 100644
--- a/config/examples/Geeetech/Duplicator5/Configuration.h
+++ b/config/examples/Geeetech/Duplicator5/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h
index c8415ec236..5f4a038310 100644
--- a/config/examples/Geeetech/E180/Configuration.h
+++ b/config/examples/Geeetech/E180/Configuration.h
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 73c65aea08..078cdb5881 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -1247,11 +1247,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 602cd62ae4..c202c04700 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 93 }  // MXL, Z M8=1.25, MK8
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h
index b33ba1f32d..0ba5260d7c 100644
--- a/config/examples/Geeetech/M201/Configuration.h
+++ b/config/examples/Geeetech/M201/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 966167947d..8200e24a58 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h
index 2cf0d30919..44bc3d038e 100644
--- a/config/examples/Geeetech/Me_creator/Configuration.h
+++ b/config/examples/Geeetech/Me_creator/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h
index e265d80079..4e3c449ce6 100644
--- a/config/examples/Geeetech/Me_ducer/Configuration.h
+++ b/config/examples/Geeetech/Me_ducer/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h
index f74a9f1ee4..5c75d3d4c3 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration.h	
@@ -1247,7 +1247,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define PRO_B_WITH_LEADSCREW
@@ -1257,6 +1257,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 49d19d6f4f..a46215a973 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -1247,7 +1247,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define PRO_B_WITH_LEADSCREW
@@ -1257,6 +1257,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 7f92144f83..122d9b81dd 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -1247,7 +1247,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define PRO_B_WITH_LEADSCREW
@@ -1257,6 +1257,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 8d9a36fd66..86659729b3 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 95, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 286e9b2f24..10595395d5 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h
index d2283d874c..69df81675a 100644
--- a/config/examples/HMS434/Configuration.h
+++ b/config/examples/HMS434/Configuration.h
@@ -1240,11 +1240,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 53.45, 71.19, 160, 169.05 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 641eef668a..35dc5bb00a 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 92.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h
index 8b621f7650..8af37565b7 100644
--- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h	
+++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 92.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 184c39c60b..23bc151df6 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 202 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h
index 589f84d4f1..adee88de6c 100644
--- a/config/examples/JGAurora/A3/Configuration.h
+++ b/config/examples/JGAurora/A3/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 98.71, 98.71, 400, 98.45 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index f614cb2dd5..c28fd2120a 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1250,11 +1250,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index fe7859be27..7c455c1188 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 202 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h
index d582bc0a96..bc46c9e554 100644
--- a/config/examples/JGAurora/Magic/Configuration.h
+++ b/config/examples/JGAurora/Magic/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 88 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h
index 4c064570ab..94990ef14a 100644
--- a/config/examples/Kingroon/KP3/Configuration.h
+++ b/config/examples/Kingroon/KP3/Configuration.h
@@ -1241,11 +1241,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h
index 5dc6f0d123..fa9d656c7b 100644
--- a/config/examples/Kingroon/KP3S/Configuration.h
+++ b/config/examples/Kingroon/KP3S/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 815 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h
index 7767ca7fb1..2def2a3eec 100644
--- a/config/examples/Kingroon/KP3S_Pro/Configuration.h
+++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h
@@ -1268,11 +1268,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 815 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h
index 3641ef0a88..e2b0196e7e 100644
--- a/config/examples/Kingroon/KP5L-DIY/Configuration.h
+++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 384 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h
index ae46269d85..a07a6c6e14 100644
--- a/config/examples/Labists/ET4/Configuration.h
+++ b/config/examples/Labists/ET4/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h
index b20b0001f3..e30c2161af 100644
--- a/config/examples/Longer/LK5/Configuration.h
+++ b/config/examples/Longer/LK5/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h
index 6dfe142bab..7a057d1521 100644
--- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h
+++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h
@@ -1261,11 +1261,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 200, 420 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h
index 7c14909d79..8f881de81b 100644
--- a/config/examples/LulzBot/TAZ4/Configuration.h
+++ b/config/examples/LulzBot/TAZ4/Configuration.h
@@ -1253,11 +1253,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.5, 100.5, 400, 850 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h
index 1d152d9cb7..7bcb750cd3 100644
--- a/config/examples/MBot/Cube/Configuration.h
+++ b/config/examples/MBot/Cube/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h
index 020d536563..75692b52d6 100644
--- a/config/examples/MakerFarm/Pegasus 12/Configuration.h	
+++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h	
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 510, 510 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index ccf4ac892c..3af291f102 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT     { 80, 80, 4000, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h
index c362e39016..b46d2c15f7 100644
--- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h
+++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 39ed9ebff0..0e077d8693 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -1255,7 +1255,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
                                       // Standard M150 17T MXL on X and Y
@@ -1267,6 +1267,11 @@
 // 16T GT2 on X and Y
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 1600, 103.00 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h
index 42dead1974..f22d374be0 100644
--- a/config/examples/Malyan/M180/Configuration.h
+++ b/config/examples/Malyan/M180/Configuration.h
@@ -1242,12 +1242,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 93, 93, 1600, 92 } // Malyan M180 Extruders
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 93, 93, 1600, 406 } // E3D Hemera Extruder
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 86f86f9b03..ef01e0f2a7 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT    { 93, 93, 1097.5, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 107bf12c1a..a7dcb06713 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -1242,7 +1242,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // choose your micro step per step configuration ( 16 factory settings )
@@ -1251,6 +1251,11 @@
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 600 }       // 64  steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : closed on MAKEBOARD Mini)
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 800, 800, 800, 1200 }      // 128 steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : open   on MAKEBOARD Mini)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 59f637a59f..e624c824ac 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1242,7 +1242,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // choose your micro step per step configuration ( 16 factory settings )
@@ -1251,6 +1251,11 @@
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 600 }       // 64  steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : closed on MAKEBOARD Mini)
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 800, 800, 800, 1200 }      // 128 steps per unit for Micromake C1 - Custom  Settings - ( MS1 : open   ; MS2 : open   on MAKEBOARD Mini)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 9085634b67..c2933a0a54 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h
index cdb028ff05..2ab4c28364 100644
--- a/config/examples/Mks/Robin_Lite3/Configuration.h
+++ b/config/examples/Mks/Robin_Lite3/Configuration.h
@@ -1250,11 +1250,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h
index 5623471d0a..5dec79313d 100644
--- a/config/examples/Mks/Robin_Pro/Configuration.h
+++ b/config/examples/Mks/Robin_Pro/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index e9ba44edc2..6d770a0ed6 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 800, 280 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h
index 0c8ee6707c..4081be5c11 100644
--- a/config/examples/Modix/Big60/Configuration.h
+++ b/config/examples/Modix/Big60/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 100, 2000, 418.50 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h
index bb3da18295..6fb09ef91a 100644
--- a/config/examples/Nextion/Configuration.h
+++ b/config/examples/Nextion/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h
index a41d8947db..d6738c395f 100644
--- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h	
+++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h	
@@ -1273,11 +1273,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h
index fe445afd8c..334afcd3be 100644
--- a/config/examples/Opulo/Lumen_REV3/Configuration.h
+++ b/config/examples/Opulo/Lumen_REV3/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1280, 1280, 40, 4.44, 4.44, 40 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h
index 48f06dc893..d21ae4deb6 100644
--- a/config/examples/Opulo/Lumen_REV4/Configuration.h
+++ b/config/examples/Opulo/Lumen_REV4/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 320, 320, 40, 4.44, 4.44, 40 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h
index d0bd372fef..9a45ea492a 100644
--- a/config/examples/Ortur 4/Configuration.h	
+++ b/config/examples/Ortur 4/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h
index 6afd6f655d..f7d759a704 100644
--- a/config/examples/Polargraph/Configuration.h
+++ b/config/examples/Polargraph/Configuration.h
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 8a88511279..dc5c7294ba 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT     { 80, 80, 80, 80 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h
index bc47fa34d2..34b1b52d1b 100644
--- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h	
+++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2020, 94.5 } // if acme rod change Z to 400
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h
index 50e433b214..e805b641fa 100644
--- a/config/examples/Prusa/MK3/Configuration.h
+++ b/config/examples/Prusa/MK3/Configuration.h
@@ -1268,7 +1268,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(GEARBOX_BEAR)
@@ -1277,6 +1277,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 3200/8, 280 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
index ac97ae1778..7bbaaeb6ec 100644
--- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
+++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h
@@ -1258,7 +1258,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(GEARBOX_BEAR)
@@ -1267,6 +1267,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 3200/8, 280 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h
index a28b00e997..64132d3229 100644
--- a/config/examples/Qidi/Qidi 1/Configuration.h	
+++ b/config/examples/Qidi/Qidi 1/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h
index 1aec1facd0..6629d546cb 100644
--- a/config/examples/Raiscube/A8r/Configuration.h
+++ b/config/examples/Raiscube/A8r/Configuration.h
@@ -1243,13 +1243,18 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT     { 100, 100, 400, 95 }
 //#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1}
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  80,  80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index f4ea0965a6..2bddc592a1 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 157, 157, 800, 195 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h
index 18c47ed22b..c4e4b56ce9 100644
--- a/config/examples/Renkforce/RF100/Configuration.h
+++ b/config/examples/Renkforce/RF100/Configuration.h
@@ -1247,11 +1247,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.82, 78.82, 800, 116 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h
index e3e288338b..fabc590859 100644
--- a/config/examples/Renkforce/RF100XL/Configuration.h
+++ b/config/examples/Renkforce/RF100XL/Configuration.h
@@ -1247,11 +1247,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.82, 78.82, 800, 116 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h
index 291ffead3e..f8cd36b43b 100644
--- a/config/examples/Renkforce/RF100v2/Configuration.h
+++ b/config/examples/Renkforce/RF100v2/Configuration.h
@@ -1247,11 +1247,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.82, 78.82, 800, 116 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index a6397a04c8..865e0b90df 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1282,11 +1282,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 77391a334a..67ad4a6335 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h
index f0411892e5..641cc62b26 100644
--- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h
+++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1600, 1600, 1600 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 8329e179fb..ae8f5998b8 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -1254,13 +1254,18 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
  // default steps per unit for RigidBot with standard hardware
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 44.3090, 22.1545, 1600, 53.5 }
 // default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 } // HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h
index 7b71851b94..7d56900f38 100644
--- a/config/examples/Robo3D/R1+/Configuration.h
+++ b/config/examples/Robo3D/R1+/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 723.38 } // ncrmro
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h
index 36fcaf5c78..83d17c19a6 100644
--- a/config/examples/SCARA/MP_SCARA/Configuration.h
+++ b/config/examples/SCARA/MP_SCARA/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 28.6738351, 28.6738351, 1600, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h
index 5c2e88995d..268aed25cc 100644
--- a/config/examples/SCARA/Morgan/Configuration.h
+++ b/config/examples/SCARA/Morgan/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 103.69, 106.65, 200/1.25, 1000 }  // default steps per unit for SCARA
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index f6c6dcba68..98a1099824 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h
index 07a3d0fd0c..b2453c02fc 100644
--- a/config/examples/STM32/STM32F103RE/Configuration.h
+++ b/config/examples/STM32/STM32F103RE/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105.0 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h
index 3687431baa..0d7b9819f8 100644
--- a/config/examples/Simax/Mi-M200/Configuration.h
+++ b/config/examples/Simax/Mi-M200/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h
index f541e36e31..dfc4616387 100644
--- a/config/examples/Simulator/Configuration.h
+++ b/config/examples/Simulator/Configuration.h
@@ -1258,11 +1258,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h
index eb4266ff0f..d04f5646a0 100644
--- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h	
+++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h	
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h
index 5192551269..1258c73077 100644
--- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h
index 36b56644dd..59198f4a7c 100644
--- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h	
+++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h	
@@ -1246,11 +1246,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h
index 4708ff4e8a..49c3a07b1b 100644
--- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h
+++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h
index 0645b37106..4d613a1040 100644
--- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h
+++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h
index dce03c03a2..5216e0dbe9 100644
--- a/config/examples/Sovol/SV-02/Configuration.h
+++ b/config/examples/Sovol/SV-02/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.00, 80.00, 400.00, 93.00 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h
index 1aac90b3d4..45c3d6fa74 100644
--- a/config/examples/Sovol/SV-03/Configuration.h
+++ b/config/examples/Sovol/SV-03/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.00, 80.00, 400.00, 415.00 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h
index 6bbd597791..2a97e92e86 100644
--- a/config/examples/Sunlu/S8/Configuration.h
+++ b/config/examples/Sunlu/S8/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 106.09 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h
index 55e17405c1..ada1f85ba8 100644
--- a/config/examples/Sunlu/T3/Configuration.h
+++ b/config/examples/Sunlu/T3/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 135.1 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h
index 24959b7ac8..19df862eef 100644
--- a/config/examples/TPARA/AXEL_TPARA/Configuration.h
+++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // TPARA uses only angles units are (steps/angle)
@@ -1251,6 +1251,11 @@
 // 200/360*32*32/9 = 63.21
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 63.21,63.21,63.21, 200 }  // default steps per unit for SCARA
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index db5fdef7b9..ad06f6151a 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 408 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h
index 20a0420603..5f30c392af 100644
--- a/config/examples/Tevo/Nereus/Configuration.h
+++ b/config/examples/Tevo/Nereus/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 370 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h
index 2681bc5b8e..55b842a6ce 100644
--- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h	
+++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 408 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h
index 5421221e69..bb8541bd8e 100644
--- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h	
+++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 408 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index 9ba757ed86..405955c72b 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 400 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h
index 622525c75d..25ead72a10 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 400 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h
index 952b4b12e6..e5736b96bd 100644
--- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h	
+++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 90, 90, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index eea3df0dc0..7bc99be076 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -1282,11 +1282,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 6400, 88.16 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h
index f28460ed8b..27c301d00d 100644
--- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h	
+++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h	
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 820 }
@@ -1252,6 +1252,11 @@
  * 830 - bmg clone
  */
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 125979de78..037384fb3e 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 1600, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 26d2cd9704..ff4ca86573 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h
index 19edd6224b..4519814b49 100644
--- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h	
+++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 94, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h
index 5f8afacd0c..54af45fd41 100644
--- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h	
+++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h	
@@ -1251,11 +1251,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index fe09e0acc2..cd19807274 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h
index 85390710af..5c0dc6555f 100644
--- a/config/examples/Tronxy/X5SA-2E/Configuration.h
+++ b/config/examples/Tronxy/X5SA-2E/Configuration.h
@@ -1242,13 +1242,18 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 848.76 }
 // TITAN EXTRUDER:
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h
index 2aee5f65d8..a02d19da83 100644
--- a/config/examples/Tronxy/X5SA/Configuration.h
+++ b/config/examples/Tronxy/X5SA/Configuration.h
@@ -1242,13 +1242,18 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
 // TITAN EXTRUDER:
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/X5SA/README.md b/config/examples/Tronxy/X5SA/README.md
index 39ce66df42..6ee7dad073 100644
--- a/config/examples/Tronxy/X5SA/README.md
+++ b/config/examples/Tronxy/X5SA/README.md
@@ -152,7 +152,7 @@ Normal non-TMC:
 ```cpp
 /**
  * Default Axis Steps Per Unit (steps/mm)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.6 }
@@ -161,7 +161,7 @@ Titan Non-PRO:
 ```cpp
 /**
  * Default Axis Steps Per Unit (steps/mm)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 420 }
@@ -173,7 +173,7 @@ Titan PRO (tmc):
 ```cpp
 /**
  * Default Axis Steps Per Unit (steps/mm)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 764 }
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index ce4eaa9cfb..d418290989 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 1600, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h
index 8d4c57a937..509428f737 100644
--- a/config/examples/Tronxy/XY2-Pro/Configuration.h
+++ b/config/examples/Tronxy/XY2-Pro/Configuration.h
@@ -1278,11 +1278,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 800, 764 } //values taken from https://github.com/rhapsodyv/Marlin/
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h
index e401c0f7ad..0785cf60f9 100644
--- a/config/examples/Two Trees/BlueR Plus/Configuration.h	
+++ b/config/examples/Two Trees/BlueR Plus/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h
index 5a67f6e4dc..335020bc67 100644
--- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h	
@@ -1257,11 +1257,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h
index 2ee0856d01..9978abd124 100644
--- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h	
@@ -1258,11 +1258,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h
index 646d31178f..2dbfa7b252 100644
--- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h	
+++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h	
@@ -1265,7 +1265,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #if ENABLED(BLUER_TMC2209)
@@ -1274,6 +1274,11 @@
   #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 400, 415 }
 #endif
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h
index b4c881cf49..b37b577eaf 100644
--- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h	
+++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h	
@@ -1262,11 +1262,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 410 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h
index 6b58fbce1e..8cf96105dc 100644
--- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h	
+++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h	
@@ -1262,11 +1262,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 410 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h
index 84a6a553df..ff027bb097 100644
--- a/config/examples/Two Trees/Sapphire Pro/Configuration.h	
+++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h	
@@ -1255,11 +1255,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 1600, 415 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 9145a15aea..c54672b443 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 800, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index bcf1236e31..9e2468399c 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h
index 8ae51f8b71..d8c9f61d80 100644
--- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h	
+++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h	
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200.0, 369.0 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h
index e6fededf35..5995624726 100644
--- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h	
+++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h	
@@ -1254,7 +1254,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // TUNE Ultimaker 2 Extruder
@@ -1262,6 +1262,11 @@
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200, 369 } // UM2+ (white box)
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200, 813 } // UM2 w/E3D Titan
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h
index c944f58a3c..704d563b16 100644
--- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h	
+++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 81.3800, 78.7900, 533.3333, 883.84346 } // default { 78.7402, 78.7402, 533.3333, 876.6687 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h
index d8c6fa61c6..5067d63768 100644
--- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h	
+++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h	
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.7402, 78.7402, 200.0, 760*1.1 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h
index 3e1445a2b9..ade0c1e32e 100644
--- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h	
+++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h	
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200.0, 369.0, 369.0 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 545d6e0d9c..abfce123cf 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 608, 608 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h
index 8fb79b7fdc..8cbbfbb0aa 100644
--- a/config/examples/Velleman/K8200 Upgraded/Configuration.h	
+++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h	
@@ -1271,7 +1271,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 
@@ -1282,6 +1282,11 @@
 #endif
 
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, ZSTEPS, 600 }
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 94d99e93fb..6f5f6a5947 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -1274,7 +1274,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 
@@ -1285,6 +1285,11 @@
 #endif
 
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, ZSTEPS, 600 }
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index b48948083f..21fa622617 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h
index 3913243e1c..d1189d2f89 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h
index c778359fd8..e5bf8a75c9 100644
--- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h	
+++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 101 } // Attention! The stock printer has a different extruder gear, so the number of steps for this one is 101 (unlike Ender-3 where it is 93)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 83459b306d..b2c9f679bf 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -1256,11 +1256,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 85.48,85.48,533.33,104.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h
index 949bef83a7..4015d9955b 100644
--- a/config/examples/Wanhao/Duplicator 4S/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   {  94.139704, 94.139704, 400, 96.275201870 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 6f1b81eb32..276f2ff80f 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.0395, 80.0395, 400.48, 99.1 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h
index 069aec6ad6..9a550d5924 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index 0253085316..e80b1f8565 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h
index d0d98e042c..e0b3b477ff 100644
--- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h	
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h
index 3e25654579..9dc273596d 100644
--- a/config/examples/Weedo/Tina2/V2/Configuration.h
+++ b/config/examples/Weedo/Tina2/V2/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h
index 512d0f266c..1923672d6d 100644
--- a/config/examples/Weedo/Tina2/V3/Configuration.h
+++ b/config/examples/Weedo/Tina2/V3/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h
index 6c65389485..69b4d2ea64 100644
--- a/config/examples/Weistek/wt150/Configuration.h
+++ b/config/examples/Weistek/wt150/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.699959, 71.699959, 71.699959, 100.470955 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h
index 8fc78e6a5d..55df70f8a5 100644
--- a/config/examples/Zonestar/P802M/Configuration.h
+++ b/config/examples/Zonestar/P802M/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 90 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h
index aaf3f63b8e..f464200d22 100644
--- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h	
+++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h	
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 85 }   // taken from zonestar config.h
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h
index 837bd84dee..b3cede69ea 100755
--- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h	
+++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h	
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 99 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h
index a6f5ca44e4..e8093875f2 100644
--- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h	
+++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h	
@@ -1292,7 +1292,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1304,6 +1304,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index f58334d366..d673950cd0 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -1291,7 +1291,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1303,6 +1303,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h
index ab46045cde..e645a44b42 100644
--- a/config/examples/delta/Anycubic/Predator/Configuration.h
+++ b/config/examples/delta/Anycubic/Predator/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 400 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h
index 1ead1a3e90..e71166db63 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h
@@ -1242,7 +1242,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1254,6 +1254,11 @@
                                                                                                                           // Extruder steps per unit from calibration
 #define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394}
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
index 09a383a446..1e06685894 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
@@ -1249,7 +1249,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1261,6 +1261,11 @@
                                                                                                                           // Extruder steps per unit from calibration
 #define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394}
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
index 8814621b33..d8e4602b64 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 428 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h
index b883e5b42e..e897116789 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h
@@ -1242,7 +1242,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1254,6 +1254,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 400 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h
index 79e9c3a32a..39758a9436 100644
--- a/config/examples/delta/FLSUN/QQ-S/Configuration.h
+++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 393 }  // default steps per unit
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h
index 6797e1aef7..f762e43e0a 100644
--- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h
+++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 396 }  // default steps per unit
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 95f0a21a65..84851fd155 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index ad4560338f..43d3bf4409 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index bf8094ced9..b0714ff519 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 90 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h
index ed6f7872e6..7f74191aaf 100644
--- a/config/examples/delta/Geeetech/G2/Configuration.h
+++ b/config/examples/delta/Geeetech/G2/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h
index 07f9f5ffeb..4fd97f413f 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h
index 0513aae695..a397620339 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h
index 345f9fc914..5b6a82a1a6 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index e81948e4fb..e41cc489b5 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT 80.2649 // ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT  { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index ea7786f56c..5263be3d39 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1248,7 +1248,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1260,6 +1260,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index e8aba09c4f..1b64deb479 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h
index d202e6d746..7ba78a5f07 100644
--- a/config/examples/delta/Malyan M300/Configuration.h	
+++ b/config/examples/delta/Malyan M300/Configuration.h	
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 114.28, 114.28, 114.28, 97.0 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 47b95fe877..3f02a6fe88 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h	
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1256,6 +1256,11 @@
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 159.53, 159.53, 159.53, 800 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h
index 3c4411ad4f..477d6f2961 100644
--- a/config/examples/delta/Velleman/K8800/Configuration.h
+++ b/config/examples/delta/Velleman/K8800/Configuration.h
@@ -1263,7 +1263,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1279,6 +1279,11 @@
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, ESTEPS_P_MM }
 // { 116.360, 116.360, 116.360, 154.3 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 710d9c7348..c1375e7c63 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h
index 374e80cb01..1a1727b73f 100644
--- a/config/examples/delta/kossel_clear/Configuration.h
+++ b/config/examples/delta/kossel_clear/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 38fa6cf38a..040172163c 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1255,6 +1255,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 11a9c19a9c..5719c66193 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -1255,7 +1255,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1267,6 +1267,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 184.8 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index c9d69f9921..95daf3e161 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -1249,7 +1249,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 // variables to calculate steps
@@ -1261,6 +1261,11 @@
 #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 158 }  // default steps per unit for PowerWasp
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index cde140efc2..d880d5b40e 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1249,11 +1249,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h
index 2c322b26f9..56c5aa8e1f 100644
--- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h	
+++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h	
@@ -1254,11 +1254,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 80, 80, 80, 80, 80 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h
index 0020491e50..eb5ccf2660 100644
--- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h	
+++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h	
@@ -1229,11 +1229,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 80, 80 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 30393381e9..c5b9764194 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 163 }     // default steps per unit for ***** MakiBox A6 *****
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index f04b562608..3dca8058c1 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -1243,7 +1243,7 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 600 } // David TVRR
@@ -1252,6 +1252,11 @@
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 739.65 } // Michel TVRR
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203