mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-07-16 03:07:57 -06:00
Ender 3 Max Updates (#507)
This commit is contained in:
Albert van Osch
GitHub
parent
0aa1ba8809
commit
afd9a2c44c
2 changed files with 61 additions and 74 deletions
|
|
@ -69,7 +69,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(Chad, Ender-3 Max)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -502,7 +502,7 @@
|
|||
|
||||
// Below this temperature the heater will be switched off
|
||||
// because it probably indicates a broken thermistor wire.
|
||||
#define HEATER_0_MINTEMP 0
|
||||
#define HEATER_0_MINTEMP 5
|
||||
#define HEATER_1_MINTEMP 5
|
||||
#define HEATER_2_MINTEMP 5
|
||||
#define HEATER_3_MINTEMP 5
|
||||
|
|
@ -510,7 +510,7 @@
|
|||
#define HEATER_5_MINTEMP 5
|
||||
#define HEATER_6_MINTEMP 5
|
||||
#define HEATER_7_MINTEMP 5
|
||||
#define BED_MINTEMP 0
|
||||
#define BED_MINTEMP 5
|
||||
#define CHAMBER_MINTEMP 5
|
||||
|
||||
// Above this temperature the heater will be switched off.
|
||||
|
|
@ -549,18 +549,17 @@
|
|||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||
|
||||
// Creality Ender-3
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
// Specify between 1 and HOTENDS values per array.
|
||||
// If fewer than EXTRUDER values are provided, the last element will be repeated.
|
||||
#define DEFAULT_Kp_LIST { 21.73, 21.73 }
|
||||
#define DEFAULT_Ki_LIST { 1.54, 1.54 }
|
||||
#define DEFAULT_Kd_LIST { 76.55, 76.55 }
|
||||
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
||||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||
#else
|
||||
// Creality Stock - Ender 3 Max tuned
|
||||
#define DEFAULT_Kp 21.39
|
||||
|
|
@ -602,18 +601,13 @@
|
|||
//#define MIN_BED_POWER 0
|
||||
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
// Creality Stock - Ender 3 Max
|
||||
#define DEFAULT_bedKp 162.06
|
||||
#define DEFAULT_bedKi 17.89
|
||||
#define DEFAULT_bedKd 978.75
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from pidautotune
|
||||
//#define DEFAULT_bedKp 97.1
|
||||
//#define DEFAULT_bedKi 1.41
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#endif // PIDTEMPBED
|
||||
|
||||
|
|
@ -686,7 +680,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 1000
|
||||
#define EXTRUDE_MAXLENGTH 500
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -894,7 +888,7 @@
|
|||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 6000, 6000, 300, 6000 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -907,7 +901,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 6000, 6000, 300, 20000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -922,8 +916,8 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
|
||||
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
|
|
@ -961,7 +955,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.1 // (mm) Distance from real junction edge // default is 0.013
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -1010,8 +1004,7 @@
|
|||
* - normally-closed switches to GND and D32.
|
||||
* - normally-open switches to 5V and D32.
|
||||
*/
|
||||
|
||||
//#define Z_MIN_PROBE_PIN Z_PROBE_PIN // Pin 32 is the RAMPS default
|
||||
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
|
||||
|
||||
/**
|
||||
* Probe Type
|
||||
|
|
@ -1140,28 +1133,17 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
// Default stock
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 50, -6, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define PROBING_MARGIN 10
|
||||
#define PROBING_MARGIN_LEFT PROBING_MARGIN
|
||||
#define PROBING_MARGIN_RIGHT 3
|
||||
#define PROBING_MARGIN_FRONT PROBING_MARGIN
|
||||
#define PROBING_MARGIN_BACK PROBING_MARGIN
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_FEEDRATE 12000
|
||||
// X and Y axis travel speed (mm/min) between probes
|
||||
#define XY_PROBE_FEEDRATE (133*60)
|
||||
|
||||
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_FEEDRATE_FAST (10*60)
|
||||
|
||||
// Feedrate (mm/min) for the "accurate" probe of each point
|
||||
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
|
||||
|
||||
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_FEEDRATE_FAST (10*60)
|
||||
#define Z_PROBE_FEEDRATE_FAST (4*60)
|
||||
|
||||
// Feedrate (mm/min) for the "accurate" probe of each point
|
||||
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
|
||||
|
|
@ -1202,7 +1184,7 @@
|
|||
* A total of 2 does fast/slow probes with a weighted average.
|
||||
* A total of 3 or more adds more slow probes, taking the average.
|
||||
*/
|
||||
//#define MULTIPLE_PROBING 1
|
||||
//#define MULTIPLE_PROBING 2
|
||||
//#define EXTRA_PROBING 1
|
||||
|
||||
/**
|
||||
|
|
@ -1227,11 +1209,11 @@
|
|||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -10
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 10
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // ENABLE FOR BLTOUCH
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
||||
// Before deploy/stow pause for user confirmation
|
||||
//#define PAUSE_BEFORE_DEPLOY_STOW
|
||||
|
|
@ -1253,13 +1235,13 @@
|
|||
#endif
|
||||
//#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
|
||||
#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors
|
||||
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
|
||||
|
||||
// Require minimum nozzle and/or bed temperature for probing
|
||||
//#define PREHEAT_BEFORE_PROBING
|
||||
#if ENABLED(PREHEAT_BEFORE_PROBING)
|
||||
#define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
|
||||
#define PROBING_BED_TEMP 65
|
||||
#define PROBING_BED_TEMP 50
|
||||
#endif
|
||||
|
||||
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
|
||||
|
|
@ -1458,7 +1440,7 @@
|
|||
// After a runout is detected, continue printing this length of filament
|
||||
// before executing the runout script. Useful for a sensor at the end of
|
||||
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
|
||||
//#define FILAMENT_RUNOUT_DISTANCE_MM 20
|
||||
//#define FILAMENT_RUNOUT_DISTANCE_MM 25
|
||||
|
||||
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
|
||||
// Enable this option to use an encoder disc that toggles the runout pin
|
||||
|
|
@ -1517,7 +1499,7 @@
|
|||
* these options to restore the prior leveling state or to always enable
|
||||
* leveling immediately after G28.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28 // ENABLE FOR BLTOUCH
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
//#define ENABLE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
|
|
@ -1526,7 +1508,7 @@
|
|||
//#define PREHEAT_BEFORE_LEVELING // ENABLE FOR BLTOUCH
|
||||
#if ENABLED(PREHEAT_BEFORE_LEVELING)
|
||||
#define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
|
||||
#define LEVELING_BED_TEMP 65
|
||||
#define LEVELING_BED_TEMP 50
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -1563,8 +1545,8 @@
|
|||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
|
||||
#define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26.
|
||||
#define MESH_TEST_BED_TEMP 65 // (°C) Default bed temperature for G26.
|
||||
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26.
|
||||
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26.
|
||||
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves.
|
||||
#define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves.
|
||||
#define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
|
||||
|
|
@ -1575,7 +1557,7 @@
|
|||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 10
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
|
|
@ -1698,6 +1680,9 @@
|
|||
//#define MANUAL_X_HOME_POS 0
|
||||
//#define MANUAL_Y_HOME_POS 0
|
||||
//#define MANUAL_Z_HOME_POS 0
|
||||
//#define MANUAL_I_HOME_POS 0
|
||||
//#define MANUAL_J_HOME_POS 0
|
||||
//#define MANUAL_K_HOME_POS 0
|
||||
|
||||
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
|
||||
//
|
||||
|
|
@ -1716,7 +1701,7 @@
|
|||
#endif
|
||||
|
||||
// Homing speeds (mm/min)
|
||||
#define HOMING_FEEDRATE_MM_M { (50*100), (50*60), (4*60) }
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
|
||||
|
||||
// Validate that endstops are triggered on homing moves
|
||||
#define VALIDATE_HOMING_ENDSTOPS
|
||||
|
|
@ -1795,7 +1780,7 @@
|
|||
*/
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
|
|
@ -1827,16 +1812,16 @@
|
|||
// Preheat Constants - Up to 5 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 220
|
||||
#define PREHEAT_1_TEMP_BED 65
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 70
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
|
|
@ -2560,7 +2545,7 @@
|
|||
//
|
||||
//#define NEXTION_TFT
|
||||
#if ENABLED(NEXTION_TFT)
|
||||
#define LCD_SERIAL_PORT 1
|
||||
#define LCD_SERIAL_PORT 1 // Default is 1 for Nextion
|
||||
#endif
|
||||
|
||||
//
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue