3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-12-11 16:00:54 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ Ender 5 Plus - Creality 4.2.2 board (#1163)

Browse source
This commit is contained in:
Gloom536 2025-11-14 14:31:44 -05:00 • committed by GitHub
parent dc3a8fedcb
commit af07d2fb5c
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
3 changed files with 8576 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

3792
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h Normal file
View file

File diff suppressed because it is too large Load diff

4750
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration_adv.h Normal file
View file

File diff suppressed because it is too large Load diff

34
config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/README.md Normal file
View file

@ -0,0 +1,34 @@
# Ender-5 Plus Configurations for Marlin Firmware
> [!IMPORTANT]
> The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.
## Marlin DGUS UI "Reloaded" Instructions
The Ender-5 stock LCD can optionally use a customized Marlin DGUS interface. To use `DGUS_LCD_UI RELOADED` the stock LCD must be flashed with custom firmware.
### Get the DWIN_SET
- Download the `DWIN_SET` archive from https://github.com/MarlinFirmware/Configurations/raw/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/DGUS-Reloaded/DWIN_SET.tar.gz
- Extract the contents of the archive. You should now have a folder called `DWIN_SET`.
### Prepare the SD Card
- Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
- Copy the `DWIN_SET` folder to the root of the Micro-SD card.
- Unmount and unplug your Micro-SD card.
### Flash the touchscreen
- Turn off and unplug your printer (both power and USB).
- You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
- Insert the Micro-SD card into the screen SD slot.
- Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
- After a few seconds the screen background will turn blue and the firmware flash will begin. _Do not cut power to the printer while the procedure is running!_
- When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
- Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
- The touch-screen firmware is now up-to-date.
## Restoring Factory Firmware
The original firmware can be restored by downloading the [Ender-5 Plus firmware](//www.creality.com/download) from Creality. You can follow the same LCD flashing procedure using the Creality-provided `DWIN_SET` folder.