3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-05 13:04:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Reduce Chiron false errors (#303)

Browse source
This commit is contained in:
Nick 2020-11-07 07:24:26 +00:00 • committed by GitHub
parent b15fbdffb7
commit aec6fce201
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 7 additions and 7 deletions
Download patch file Download diff file Expand all files Collapse all files

6
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -1042,10 +1042,10 @@
#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -7 // Farthest distance below the trigger-point to go before stopping
#define Z_PROBE_LOW_POINT -10 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -25
#define Z_PROBE_OFFSET_RANGE_MIN -30
#define Z_PROBE_OFFSET_RANGE_MAX 10
// Enable the M48 repeatability test to test probe accuracy
@ -1200,7 +1200,7 @@
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
//#define FILAMENT_RUNOUT_DISTANCE_MM 25
#define FILAMENT_RUNOUT_DISTANCE_MM 25
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
// Enable this option to use an encoder disc that toggles the runout pin

8
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -187,9 +187,9 @@
*/
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
#endif
@ -206,7 +206,7 @@
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
* below 2.
*/
#define WATCH_TEMP_PERIOD 20 // Seconds
#define WATCH_TEMP_PERIOD 30 // Seconds
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
#endif
@ -215,7 +215,7 @@
*/
#if ENABLED(THERMAL_PROTECTION_BED)
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
#define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius
/**
* As described above, except for the bed (M140/M190/M303).