diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 7fc0aa6631..03df9feccd 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 26ae38446b..d5c2677b96 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -3090,30 +3090,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 25c9f24128..05486d3bfe 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 3fd991c080..b5591cd648 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index d3112e20f5..8d8a8e15f5 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -3161,30 +3161,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 4470b68943..6f57aee848 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -3162,30 +3162,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index a40f2ee0b5..2fc4650df9 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 8ef692b683..0aee3e5b09 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 8532bec7b6..ba67cbfd7d 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 92e1e652b5..cd17f12b3e 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 5e89180e64..2a3211dc0f 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -3158,30 +3158,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 1f663e513b..d7a4d57329 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 8befcda9aa..9df38e145d 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index c991422965..3eb9abc46d 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 3d5678474b..009e630f2e 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index d848856e14..274494fc9c 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index d0d546d214..c6c3ea58f9 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index a26cdb60d4..b4e6087828 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -3103,30 +3103,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index ff645db24d..b596a14eb2 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -3103,30 +3103,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 36c7683ef1..2df68e9375 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -3103,30 +3103,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 09d488422e..183582cff8 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -3103,30 +3103,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 3234199c26..ce9974b957 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -3098,30 +3098,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 7eddcd9994..84290608a5 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -3098,30 +3098,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 08897279bb..2b3b7a34d2 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -3098,30 +3098,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 9460abe4bb..c5753d980d 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 3d144f52a0..3a11912524 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 057a56c420..9f8cfe0790 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 64507b83ac..7489ed7217 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 4f6a2a7fbd..6e5ce8270e 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -3095,30 +3095,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index b3b1631000..2b55cf9e91 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 383ac58b62..3c5cf615c7 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index bf27fba359..03086e6d16 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB7 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 1 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB7 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 1 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 6dc8f2eebd..c99f5b1986 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 786cdb3e8d..4dc7077dfb 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 5fa107ec5c..789c5738b1 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index defdeba132..786984dc24 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -3080,30 +3080,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 89cb2c83bd..32937de4df 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index a242c65988..68382282b3 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB7 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 1 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB7 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 1 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index d80f1d8b25..ec7c0ecdd6 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 2ecfabb494..84980bf4ca 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index f4b4eb65dd..d2c4743fb6 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -3018,30 +3018,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index 6313059fc6..f15419b53f 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -3083,30 +3083,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index b550a62107..27b5f3b74b 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -3083,30 +3083,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index f2a2746d92..955a0a92ab 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 8338bad82d..d6ef4ef2b7 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -3079,30 +3079,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - #define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 15 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 15 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... #define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 2 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 2 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 318bc615e8..9d6f914107 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index c0e337bb12..48ebeeac25 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index e9a114372d..4c52d60246 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -3078,30 +3078,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 259c728bad..409975bce5 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index c654865a44..cd7f0d5bf1 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index f054a31e66..20f88da503 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 4a65b603ce..bded0d1db7 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 606c651c15..bff44ae989 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -3080,30 +3080,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 4f6e9e51ec..20e7f00278 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index bac53e1776..f985b35fc5 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index ed5d9add5f..a756ca63fc 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index c3642ab7fd..2d700a3549 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3073,30 +3073,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 730c658109..138848f5ef 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -3073,30 +3073,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 5ac46c2a50..852c8a7b9c 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 17 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 17 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index f165291de6..f234c59a9a 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -3079,30 +3079,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 01d4cbf6b4..cae8e3df7c 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 9934d65b4f..09b7fec7c9 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 0d9b38100c..a8f9ec057f 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index e5b44c9d0e..daae7d46dc 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -3093,30 +3093,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 47c958b79a..2a624eaead 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -3098,30 +3098,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index ee2f82dc35..0f25e4e50f 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3075,30 +3075,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 227939dfed..dd7ad336bd 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index fe4d56bbe0..bdc26d5bfa 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -3076,30 +3076,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 4e71fd94a4..b46c0fe95a 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -3076,30 +3076,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 027712ae1f..7c81c34f3f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3077,30 +3077,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 679343d93a..765180a173 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index f030404506..191cf30bcf 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index cfdcfe2e35..33171adc6a 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 55996b22a6..213b99b194 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index eb19042967..5df2a10b8c 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 88633d1101..b2fb3e5b35 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 3d638026e6..9568fea44f 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 83aff807a3..fed631ddb3 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 5932a69466..da192fbfc8 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 1b79068931..e3a736d5bd 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -3072,30 +3072,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 56a68a6424..f715329704 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 0c68950cb5..cfccad973d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 0ed330cfbb..bdf3a813d6 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 2cf6abe58c..6c17c6abff 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 014a4e1671..67d5a2eed4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 911b3aa354..659fc5c8f7 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 721c99796d..56b8b8c5de 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 360b7004bb..1cbf766dd0 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 S1/Configuration.h b/config/examples/Creality/Ender-3 S1/Configuration.h index 9a30007134..235e350fcf 100644 --- a/config/examples/Creality/Ender-3 S1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index ed40f10253..5d60555ad4 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 2477189fc3..fa209ee2b1 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 179077f8f2..810d291a8e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index fbebea62e6..302c78d410 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 2b4658803b..cec7733e67 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index c0655a52c4..40874e2d29 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN PB2 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 7df51e5e50..75b4fd1223 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 0ecab85574..45f6ce9df7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index de44537831..10016451f5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 1740719406..a9a26be02d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 4ace863e16..91dbf38d49 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 364e51520a..cd292c4edc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index d5f4485eca..646e45e246 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index d2ff03a8bd..bdb33a6854 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index cf863362a9..d0efaa0296 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 28b7ba86ea..88dec31928 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index c5f5e06aea..70e9c188dd 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index ff6ec3fe00..abcc878a0f 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -3074,30 +3074,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 28f8b0241a..e8d4b0919d 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index be9e8ba3b7..17d0ce036e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 5f3f11d5ab..43126dac84 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index c4f6e442da..d97d7d35a6 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 69ea0dd34b..59c35d4e70 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 849fe2c1d3..9c404883b0 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index bed5f74943..aa6f04d29a 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 16 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 16 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 700a3da734..7203a682a0 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 19c8b0ea6c..c532237b18 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 222ff582aa..62b14a1030 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 8df27e9763..5e7c3f54dc 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 6d160afb00..ea4af82f17 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 71b662983d..44cd44613e 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -3080,30 +3080,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index fd1c0bc7f3..2b53419071 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index b491ef4545..2d77ed5be6 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -3035,30 +3035,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index f6f984c4b7..4ec6da91a9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 9ec79799f3..5fdabc01c8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index d8d7eafbc6..33e2f86dc1 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 796de12f97..89c751f1ae 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 95cb27383d..60b6ef2c91 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 217dee535b..6024ebc5ea 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 3158516ed7..be5febbd31 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index a0c4327729..65fa64252d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index f6d4a92c09..5cef55d8b8 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 92d3343c79..b0faa6d93c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index ef4e119a58..a680eb6ea7 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -3073,30 +3073,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 7815237d10..e274ce3d10 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 5dd1501286..0d2fca38ec 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index dd9aa5ba0e..a6bd7dad6f 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index d0eca20fd3..17b8d35788 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 8cada2ef59..a28098315d 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 9de31e1801..8924e150e9 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -3169,30 +3169,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 12179acea7..7659543739 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -3111,30 +3111,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index f6c2fd92da..8cd4601814 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -3108,30 +3108,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index f150acd8ac..758f330052 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index cf88252519..7d8c207839 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 91c2538325..9e7746d0c5 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index b4ff5a1367..dfc9966dcb 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index e1d03f6e4b..0619c11645 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 30a7540d54..bf3ea927bb 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 6235b58af9..449587871d 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 9786c4207a..0ea50038f2 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 7a336adb25..79c1d992f7 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FoamCutter/Configuration.h b/config/examples/FoamCutter/Configuration.h index 6841bb0acb..908b3561b1 100644 --- a/config/examples/FoamCutter/Configuration.h +++ b/config/examples/FoamCutter/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index db590456f4..2c8230a120 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 45d22381a5..98838d7723 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -3175,30 +3175,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 772dee35b6..30c873f932 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 0788a6a144..f3f2cd2e8a 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -3080,30 +3080,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 287b23e3e8..c2d02f0aa8 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 4cc363f575..929ea34c64 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 25e7c94949..b6080f17bb 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 5ae2491121..74a1ae1391 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 7654e40373..3261444d9c 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index fa34b7d4e1..a7efa4c16c 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 57da365ba7..eff41a2972 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index bba26963e9..9680bea946 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 72704b92d8..2cfff9afdd 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 59d33cf156..b84fb85f76 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index c52da99b27..e9a42f9357 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index c31a0492db..f13033b4fd 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 2d468a1a39..66e48c11f2 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 4e787969e0..0c377e0abc 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index be150797d0..a067214c70 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 5c60de1d6a..db5cb6c668 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index c880c1fc60..d96bc3d073 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index a6f88d3abd..804fc2a3d2 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 371bda66f7..aefcb815e9 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 3ae20f0ef4..c4968326c3 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index bac34ca2a5..c28597cf58 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index d2e2912ed1..567d6e1b45 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index d2b654ab75..4e9764feed 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -3074,30 +3074,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 702ec65a34..f20f901ad6 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -3075,30 +3075,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 2b8aa34e5d..27da77ad1f 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -3074,30 +3074,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 553b8e4594..ba04ec4dfa 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 89cb69e32d..54465873dc 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index f1164b8757..6e70334b5e 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -3061,30 +3061,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Index/REV_03/Configuration.h b/config/examples/Index/REV_03/Configuration.h index 5741e7a8bb..e1e3406bc9 100644 --- a/config/examples/Index/REV_03/Configuration.h +++ b/config/examples/Index/REV_03/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - #define NEOPIXEL2_TYPE NEO_GRB - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 8 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 8 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... #define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 8 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 8 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 36ead04052..5e8bf38fbc 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 8216f5ea78..fee499b542 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index ea868f577c..72eaa8b0fe 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 0f8dc98831..00a9d9f309 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 1d3aa7c4a1..0770cd59bd 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -3072,30 +3072,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index dccd45110b..b614cf61e1 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 983faa1cd5..51d1f632d0 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 4a40f50370..22ddafaaf8 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 630cb85038..aa2a23fff6 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index dc24198b7e..781e13780b 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -3103,30 +3103,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index e5c01df616..76c3ff1f49 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -3075,30 +3075,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 3b19853f29..d16d1ff6a3 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 004c182bbd..7649953391 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 296a103cc7..c70fec339a 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 2ff371a6ed..57cd355202 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -3092,30 +3092,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index a35bc789d9..f2ebc1f0bf 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 5119c3e324..2566173b1c 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 447a98c889..93dfa5076c 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index d84696d1e3..cb0d7f2f97 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 15eecc744e..d1b9a6cee6 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -3079,30 +3079,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 048611f709..c4a9ce93c7 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -3070,30 +3070,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index dbe8475611..64d9bd23e6 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 36e29f8e95..6550d96b97 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 4b07adecd5..48e1d9d4c2 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index c313d38f8f..f724ff4ae2 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 71c12fdb8d..eff46aa76d 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index fdeb1cbdbf..f4bd166b6e 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 67d6d2435c..86c61f1cde 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver #define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 20 // LED driving pin - #define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 20 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index cdf7aa9ac2..1875fea077 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index e241980d92..2b10638768 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -3121,30 +3121,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 52c51e85ee..f268afe563 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -3088,30 +3088,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 555480b777..4caf736c3d 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 7b2dcdb166..dd52907992 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -3108,30 +3108,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 7474aa30c0..8d9e8e690e 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 3e06f26c99..32a4e1dd1b 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index a62066c66f..e7e7d061b9 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index af65e48ae4..8a7b4c730c 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -3069,30 +3069,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index c6fde497dc..2a577cafe9 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -3114,30 +3114,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index daa5d5af1e..ef9e65fd5d 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index b2c36456bc..9fbc19149c 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -3080,30 +3080,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 7cb0c39c29..ce27ffbba2 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 187e5751b4..b72d5b042b 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -3110,30 +3110,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 9229c180b6..7261e13021 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -3110,30 +3110,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 3b2e8a8f81..56f6eb6465 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index af6cff28cc..c68ccebe06 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 792982311e..c4ffd68255 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index bed7c81e23..03384b6ea7 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -3095,30 +3095,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 381cdac02a..f7192de5b6 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 7d457b9a7c..d43d28d58f 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index edf0f1c3bd..55290df4a1 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 56e1820561..53888b352e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 9fadb11cbc..166c357f9f 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index bf165e90a6..1139414e4c 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index d44242ade8..a48e3b477e 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -3090,30 +3090,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index ffdeeb2b51..f2b33a097c 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 6a7c014751..e0f271d7d7 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 16bc9fc27d..42c004d55a 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 462e1348a0..a6c9492e3a 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 8ce7df20a6..cf37f004b0 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index bb87eb0574..a1dccdb513 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index b8161bbd2c..c97e0a0f78 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -3110,30 +3110,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index a9d3a3da0b..e6fbce96a1 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 3f1927e9a3..b51c1b2531 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index bc9e1a60cd..a24e5043d6 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -3073,30 +3073,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 903f6b1de0..6bef872846 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -3063,30 +3063,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 4429e2e1b2..82985c4dd3 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index e0eb3b0b04..6b2a59a5b4 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 11115ce4f5..4ef499d078 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 9f265b34a5..9b7ba07d82 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -3068,30 +3068,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 56d10c2f50..4dae484ffd 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -3095,30 +3095,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index ed49ea8924..ff5074227d 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -3100,30 +3100,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 3bb6bf6697..da870dbe07 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -3099,30 +3099,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index eedc9a85a3..ae82899c48 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -3105,30 +3105,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 3d2677a264..2f92d4ec22 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -3098,30 +3098,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index b15816f086..2113e85fb7 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 75fb87bebc..741f1e0eac 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 8f21ed5b4f..54da2bd8a4 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -3074,30 +3074,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 9eacb87f7e..8c40277225 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index dc5e3be501..7a9ee082d4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 2242d90d4c..dcf85bd3bd 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 5278af237c..6f32d74c75 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -3090,30 +3090,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 3e4f2dee75..1c3a298ad0 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 5a7b977ee1..b8a6e6e48a 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 2494977136..336ee69ab1 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -3078,30 +3078,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index ddf4ef91b5..11abf0f705 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 8279643aea..9771ed3333 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 70e7ffff16..1343a3f348 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index ad3a81c5da..26bb1e6dcd 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 22a1c313ae..fcff31d633 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 89b26c5e4e..c11d92fc4d 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index ecb894a708..bfad21d3a3 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -3064,30 +3064,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 884f6f5491..44e8e6f0aa 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index b94055b4af..0e91b15ede 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -3065,30 +3065,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 6479d8c456..59214edd87 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 54eabcfdc8..a4136de13a 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -3066,30 +3066,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index d38fcbbdf9..082e7d0c12 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -3206,30 +3206,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 55b87f10a8..9adff162ea 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -3206,30 +3206,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 479d0884b5..8cb11cd29c 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -3149,30 +3149,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index cb2ca4d1a6..c6e811e439 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -3146,30 +3146,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 22cfe4193e..1f030a1136 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -3157,30 +3157,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index c27e3ca69a..b338a6603e 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -3151,30 +3151,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 2b660ead6c..5afae38aa3 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -3147,30 +3147,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 6a57e06a66..accfa20887 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -3148,30 +3148,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 73cfd82cbb..9edb956ef3 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -3161,30 +3161,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN LED_PWM // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 12 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN LED_PWM // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 12 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 206a7a763b..01db9e307a 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -3151,30 +3151,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 6e5ce4c221..c90d9fad6e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -3150,30 +3150,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 17aa8943e5..2401606496 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -3150,30 +3150,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index a0da566a14..c3b0983231 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -3147,30 +3147,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 6b2377568b..be5d450c96 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -3147,30 +3147,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 7a7f968494..4cc4e25a14 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -3147,30 +3147,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index adde8b1140..f8034fa424 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -3147,30 +3147,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 42b4d61cfd..4408ee7a93 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -3149,30 +3149,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 9d669bed4f..63feecbe19 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -3153,30 +3153,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 1ca6c4c90c..93ff4d3cd8 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -3148,30 +3148,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 46abf94ab3..b69cae940d 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -3113,30 +3113,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index a660afb2b9..3b0b631ed2 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -3156,30 +3156,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index e3b2bcbbc1..408878e695 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -3148,30 +3148,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 6ebe9b81b6..058d7a2645 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -3148,30 +3148,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index a96dae4763..17caf0ab83 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -3150,30 +3150,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index b8fc5a153e..a89ff08516 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -3169,30 +3169,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 39cb86cc58..23f4c59596 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -3153,30 +3153,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 074293343f..6bc46f2682 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -3072,30 +3072,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index b6b331ef31..3ec51c5b36 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -3051,30 +3051,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 27b341f48e..e6ab2f2125 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -3067,30 +3067,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /** diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 2db7d9d3ba..ec27c6d0bb 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -3071,30 +3071,30 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - //#define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) - #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip + #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else - //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel + //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel #endif // Use some of the NeoPixel LEDs for static (background) lighting - //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED - //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED + //#define NEOPIXEL_BKGD_INDEX_FIRST 0 // Index of the first background LED + //#define NEOPIXEL_BKGD_INDEX_LAST 5 // Index of the last background LED //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W - //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off + //#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off #endif /**