diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h
index 7451c9cef3..e8f920c79c 100644
--- a/config/examples/Anet/ET5-Pro/Configuration_adv.h
+++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h
index 7451c9cef3..e8f920c79c 100644
--- a/config/examples/Anet/ET5/Configuration_adv.h
+++ b/config/examples/Anet/ET5/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h
index 7451c9cef3..e8f920c79c 100644
--- a/config/examples/Anet/ET5X/Configuration_adv.h
+++ b/config/examples/Anet/ET5X/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h
index 788e0f1017..2553401b82 100644
--- a/config/examples/BIQU/BX/Configuration_adv.h
+++ b/config/examples/BIQU/BX/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
index 594a2ecc1d..bb51dcca1f 100644
--- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h	
+++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h	
@@ -2056,7 +2056,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
index 7a3c56c3fa..6be34985c9 100644
--- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h	
+++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h
index eaf91273c1..3db853c95d 100644
--- a/config/examples/Creality/CR-6 SE/Configuration_adv.h	
+++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h	
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h
index af080c9117..d0628217ed 100644
--- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
index 3a798bbc65..c988dd127b 100644
--- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
+++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h
index ad5d40a75f..475103301c 100644
--- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
+++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h
index 49ee991360..9319686259 100644
--- a/config/examples/Geeetech/A10D/Configuration_adv.h
+++ b/config/examples/Geeetech/A10D/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h
index 6a6c2ced44..49cfcad986 100644
--- a/config/examples/Geeetech/A20/Configuration_adv.h
+++ b/config/examples/Geeetech/A20/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 6a6c2ced44..49cfcad986 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h
index 6a6c2ced44..49cfcad986 100644
--- a/config/examples/Geeetech/A20T/Configuration_adv.h
+++ b/config/examples/Geeetech/A20T/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h
index f4bdb6e1b6..ac406e6cbf 100644
--- a/config/examples/Geeetech/A30/Configuration_adv.h
+++ b/config/examples/Geeetech/A30/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h
index f4bdb6e1b6..ac406e6cbf 100644
--- a/config/examples/Geeetech/A30M/Configuration_adv.h
+++ b/config/examples/Geeetech/A30M/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h
index f4bdb6e1b6..ac406e6cbf 100644
--- a/config/examples/Geeetech/A30T/Configuration_adv.h
+++ b/config/examples/Geeetech/A30T/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h
index c68ebf1f87..b7227f62e1 100644
--- a/config/examples/Geeetech/D200/Configuration_adv.h
+++ b/config/examples/Geeetech/D200/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h
index f4bdb6e1b6..ac406e6cbf 100644
--- a/config/examples/Geeetech/E180/Configuration_adv.h
+++ b/config/examples/Geeetech/E180/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h
index c68ebf1f87..b7227f62e1 100644
--- a/config/examples/Geeetech/M201/Configuration_adv.h
+++ b/config/examples/Geeetech/M201/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h
index 74d9dd809c..246862027b 100644
--- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
+++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h
index b1188025a9..b2d08d8281 100644
--- a/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h
+++ b/config/examples/LulzBot/Mini2/Teensy/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h
index b0110d77ab..6a385c2773 100644
--- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
+++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h	
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h
index 35491fb2c5..e571b89143 100644
--- a/config/examples/Ortur 4/Configuration_adv.h	
+++ b/config/examples/Ortur 4/Configuration_adv.h	
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h
index eaffd33820..5498a9a141 100644
--- a/config/examples/Simulator/Configuration_adv.h
+++ b/config/examples/Simulator/Configuration_adv.h
@@ -2073,7 +2073,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 96792fb7ec..85c6776c61 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -2075,7 +2075,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
   //#define ALLOW_LOW_EJERK     // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
index b0c4b77b5c..5af3cac8f6 100644
--- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h
index f401eaece1..3c9ae92f7a 100644
--- a/config/examples/delta/Geeetech/G2/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
index f401eaece1..3c9ae92f7a 100644
--- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
index f401eaece1..3c9ae92f7a 100644
--- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
index f401eaece1..3c9ae92f7a 100644
--- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   #define EXTRA_LIN_ADVANCE_K   // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index bb3ebde478..156223048a 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0.00    // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h
index 044b9d8131..8df85b8c16 100644
--- a/config/examples/delta/kossel_clear/Configuration_adv.h
+++ b/config/examples/delta/kossel_clear/Configuration_adv.h
@@ -2074,7 +2074,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Add a second linear advance constant, configurable with M900.
-  #define LIN_ADVANCE_K 0       // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0     // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG            // Print debug information to serial during operation. Disable for production use.
   #define EXPERIMENTAL_SCURVE   // Allow S-Curve Acceleration to be used with LA.
   #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.