diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 4848ffe9f2..55a5bc0308 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index d09ec62654..b6c140593f 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 231fbb5c8b..97306e844d 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 3254db6f02..0afd7b9a9f 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 9368ba8b71..ece0866b13 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -694,7 +694,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 9d109426ca..984831d73e 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -694,7 +694,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 9b25f7d53a..cf33f57031 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 25bffdcdfa..b54a014a5e 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 7950b92bfa..e81087734e 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index a701ba3b72..40b85e64a7 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 8b7a72598e..eef3a487c9 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 2f4ac83b61..fa6da56955 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -638,7 +638,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 8e546d7f81..0edb58a4f4 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -638,7 +638,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index fe2ddfd880..a54d118897 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 79cb3008b5..0d226a1372 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index e069b884a5..dab2b13492 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 250bab6d6e..1cbefa5978 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index c444f338cb..8c7ece5e47 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 875aa820ef..b7db7f3fa9 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 57ce1b2598..df468035f7 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index f551eda0d0..81dd52e275 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 34f91f482f..75dd246fb3 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index afdc2cf635..c03ba4aed0 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 5e8da5b5c2..f4f1b228ed 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 62a3cb0850..c68252d4fb 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 168b1cff09..c3da6df46d 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index e33d404414..b8d51242f6 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index d677f99826..b37a23bec0 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 477d830eb5..a800144d7c 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -662,7 +662,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 9be32678e3..c2b04bc5a7 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 9096b25852..7339df2ffa 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 66fab708ad..e11dc9f9b7 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 10812eae28..cc7d202ef8 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 95fce4b32d..2104174a65 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 48b59a8df2..6b75e5d8c0 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 835b39a58b..882dc01476 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -646,7 +646,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 8d4b18c2a9..93734d089b 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index a6a3ba94f7..d0cb2184ba 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 595a5be3ec..3100f0c19d 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 2d405e8b29..c4cc22b33f 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 30fb1bf8b1..f03203f343 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index 150f80adfc..526fdeb150 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index 7fa07f73f3..c832eda56c 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 0679abf2ed..4c36149a0a 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index a7b2ed78f2..b941038ef4 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -643,7 +643,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) #define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index d5251e659e..9e82376c17 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index ce65c912f4..01be113168 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 2e76b4d276..d859f7779b 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -649,7 +649,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index fa71a4b37f..a309d44fd1 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 0ef7e3a138..4f43349c5b 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 60ba3f2ca5..596ed0e0bf 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index fed2502776..f10a2d2bb1 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 094cb9757b..f471286335 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -647,7 +647,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 3c7bcdff8c..8d431b935e 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 89e8d63afa..205566294f 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 840248b902..25f262a9f1 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 6dcbdcda0b..623f2576e4 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -645,7 +645,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index ce542ce4b9..b84180e9d0 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -645,7 +645,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 08d2ac92ea..61de81716f 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 8e1e3e4ca2..b5e369bd9b 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 4ea686935a..92c2c78070 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index ea971a436b..29f30f5ac2 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 289006a5b6..7a4bddf8f3 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 993de38c57..c9c14cf24e 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -643,7 +643,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index a7a9d20638..c2e2b4fcf2 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -643,7 +643,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 403bb02607..fc2719d6cc 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 91112048e6..1edfaa455e 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 58946dc38e..e1a38c99ce 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index d994c71764..2ee4c63372 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 98697e0e3e..d09989b476 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 47c4cc66e2..df216e4bff 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 96c9c4bdd6..051969d056 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index a0e548f7ac..735af8afa3 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 4318d3641a..6a3ef88bef 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 7954850769..9540896c7a 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 63fcec84f0..5a7ffe2678 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 123579121e..8b5845f22d 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 0d50cf0ea8..14b3cfadae 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index d97faca418..6f9ef0033e 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 48b21a6ef3..792f12993d 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index e9c8e22151..b73d1cff69 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 461b2c4400..00f7cc91c2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 163a568324..b771ed08a3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index cfb118d42b..f318e4d735 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 8a88c3e501..5831434b63 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 569325923e..cfb38fbab6 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index fc324cc964..b08ca3eaef 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 455ae603d1..e19c75c90a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 S1/Configuration.h b/config/examples/Creality/Ender-3 S1/Configuration.h index a1638bbd75..37fc9aba48 100644 --- a/config/examples/Creality/Ender-3 S1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 3badccc8b8..1320393bf2 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 4f3d733878..8d5ca48a59 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 1889c685c9..5fcb124caa 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index e336d1af68..c28b87720a 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index cabaad6a3b..05cd309b10 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index 4e14102f88..077023ba25 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index b5953f9bd9..3b77046352 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 51a4b5dad9..3865291729 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 33dc5e8bcb..178ccb9001 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 236bc9d525..c942a8df1f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index ce2134dc6f..0ce29c4924 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 3c53bf18e9..9aedd1731a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index e74c533d11..dc3ad50bc9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index ef80530a92..b1c3fe7c6e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 6b9fdb58bb..675c68ed77 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 801056a941..bb85ce16dd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 84d71cb9e0..1a8e16cc06 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 029d45e090..9a7db2328c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 4f6f74dc72..69fe736a6f 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 5a55c3127b..367a5d6d1a 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 431c04e791..4c93d85f8d 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 59e448716a..1a2c3992b1 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 6c241e19c4..cef40b309d 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index a9f473844a..82ce2014f7 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 67ad1f3bd3..c09ada66d1 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 409d5a1345..0e9ac8c699 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 8d1f13963a..ac8f6d36a1 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 62ed1f7960..ffa4e2580a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 2fe47f1ff4..762064aeec 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index ccf2d37d7b..09493a8bb1 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 6484e8746b..582260e46f 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 28b43c257f..dc2e7c170c 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 0551a29c79..2461c966d3 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 06e51be734..3686368129 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index f6dee6d2b0..cc5f7b45bb 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index b38b850d41..7dba8f4325 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index fafb883341..45c7f3ab52 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 68c5e98356..3425fded68 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 58c6fe9259..4f034ba924 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 5954be15c2..ed1ad10661 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 0d573c7e6c..3419fc0765 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index c4eb80d3f2..5e567f99f5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 77bdc9e455..06dad34469 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 3edbbe0406..e338037eca 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index fcec5b8ebe..e6d78a4c7a 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index b00d8bdf49..d780cc77b9 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -638,7 +638,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 567327509b..b418a445dd 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 0cd9ca446b..5e5e814a25 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 520f3a9e98..6edb7b285f 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 75ae0bf611..db92951e9b 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 426e4bd516..73b1e07cc5 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index b3e49178d3..24e3b0635b 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -672,7 +672,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 8797e77c0c..113a5ab7c3 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -643,7 +643,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 0afa2f3e7e..8b0986910a 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -642,7 +642,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index d3f0a978b2..b8b9beeade 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index cf9601cb2f..eee09a5083 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 3e38841961..ebc0c928ef 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index cab8073620..21b37cbe44 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 4996e86e5f..92cb0e2bea 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index fc9a6bc890..71fdd3bf98 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 2903d02015..a3a01c6c00 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 01574aa498..08fcd7691c 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 6db112feac..0585c0a759 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index a313d0a831..da11bd9361 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index 97500dca55..1df5e59dbb 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index b4cb1c7d89..ebb9521067 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index aae9f494d7..af10013df9 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -694,7 +694,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index cf0422a19c..e940bc00d5 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index f1c9142f21..c9114ee908 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 760c806dac..cd8435f1ba 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index dfca1384d3..2c2b4b633a 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 680962e14c..76288834dc 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index cfb195a41d..bc3b1b4199 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index a86f1c0036..de40428738 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index cb3fbbe541..2c3da8edad 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 335ecdeae9..ea00ee00e9 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 63bc9483b6..0fe57fd4e4 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 180dbac2aa..a3b089cc05 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index e003c1bc3f..108b906fa4 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 11de28b090..0e639a3814 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index f5c1bf4702..ddfe3c1381 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 3b845f8947..b5637a26cf 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 5a732d7ac2..ab726737f8 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index b7cdd088dc..fe5507bf67 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 1d5774668a..c75020a977 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index c8af679fe9..e520922e6f 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 1df4f3f8fb..780b22adfd 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 8309f194de..bdab1684b8 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 9810376458..5a6e5bf6aa 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 66f0dce063..2e66cb6daf 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 38d6ce7408..31f4cefc29 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 796d14b1e4..abe04e143d 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index cb94b3306d..0100a1ed5b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 95e68c66e6..318370c132 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index b9dee2cc8e..3d184f8b74 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 7db26b4043..30136d5836 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index eee3322442..4b9f7f6ff9 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -633,7 +633,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 7a56c9bd91..d52b9f9868 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index a2cfea5946..792b5114ef 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index c5b6a55517..fe5a5a023b 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 6a318324f5..ccaab46c8b 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 5c5325f2b0..31d4eb6fbb 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 5deee8a51c..66ec92504a 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 91f7173c51..0c8bd11bb7 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index c5b48f8d07..b1c43e5a2e 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 8f1eef634e..f464068c5e 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index b7fafae900..5e61845545 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index afda88a9ff..2635c35d90 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index eec3b0eb35..469148a809 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 9d3e2b42d4..8f7ea3d502 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index ca5519135f..7519d699e9 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 83462ee716..09e879906c 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -644,7 +644,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index bf8f6aa680..55b46cfa27 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 6034c8bd6b..e6391245d4 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 623ac793ba..1427be3c34 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index fed0332edb..c92c0c68fa 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index f8dbf35032..e0983fe8fa 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 3873b49e43..ba0e357006 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index c880cb8e1d..956e8604a8 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 98421bf616..1f9a326df1 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 31bd67754d..857876cd7e 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 40a21219e9..1fbfc611d2 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index bc794cf835..cd276160c7 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 974c3214cd..e184a77dc0 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 9c543f52b4..f8ff726d20 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 8bfc735e95..608f21cacd 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 05a3abb4c1..acc23c133f 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 9a82968706..79bd6ac9b0 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -659,7 +659,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 2190e3c20d..66d31f671a 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -652,7 +652,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 68132587e7..005530f70b 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 278515bb31..e54c54d5a8 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index b3623c0396..3639bf3ba7 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 7bbd1d2e26..f69663bbfd 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 44fe3553bf..67e162c4b0 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 1c1b267f66..5d51e1635f 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index e46d414b07..835b555d6d 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 99b24c6ee9..d0d0da9a71 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 366140e435..66ced4ae54 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -648,7 +648,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 09a28ec504..3da089eb43 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 5ff0b4b6c4..30bdeb5763 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index ddd9f90278..7a9ba62bbd 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index e3a2d3ef62..6fa29e5faf 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index e0b7206d40..bfc5216cf1 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index fcc23650ee..c9ed563ae8 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index a7a45e8d68..0719dbfe05 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index de5700a1f4..edad9bc75c 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -650,7 +650,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 3e9d2413d3..9f42b0dbf4 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -639,7 +639,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 278f0f728f..0a0c2eae83 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index a0d166f6ea..d5e1da3797 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 440eb0ec82..594d0622c0 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 6ebc5deeaa..53456add14 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index c8f15735b5..8a6dc7ce7f 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 248bdb060e..9f9bd3052f 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 361aaca1ce..af510ec604 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 57eb810a7c..07b2d850b3 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 7a924f1343..02bb1ad00b 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 8f4b93b57a..5ea2f0b32b 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 7c3186cac5..47e63780c9 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 0f60873255..6a2a662765 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -281,7 +281,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index f6f9e54d4e..2f79942f48 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 91031a848d..4d5f120496 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 7ba5201a6a..a9ad15a7fc 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -644,7 +644,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 214773b593..369927a1ed 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index c0101c85ae..0279d1b327 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 962001ecb5..a2f9a595a4 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 892440b4ce..e8dd1341dd 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -642,7 +642,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 47e9f1f67e..296d060f59 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index a0295fd926..0538091365 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -652,7 +652,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 841875bd39..cd83173830 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -653,7 +653,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 61e9419fa0..08bea63007 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -652,7 +652,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index ce2fb65e2f..04c4205e7a 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 032c25dcf8..ddc3879ac5 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -656,7 +656,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index ac4155d587..91f674b80b 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -652,7 +652,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index aa109cebd2..edfc2ac088 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index dabcadf3d7..651f7bc921 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 354aa0791b..6a6edf56ee 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -648,7 +648,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index f07737101b..d949c7b4f8 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 4b5aa48250..311344be17 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 1dba7a5f61..c62d798c46 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 354d55c9c6..1fc5712678 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -663,7 +663,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index b769434081..0934dbf44d 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -667,7 +667,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 9475672fb3..f8d9ac3013 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 422064f349..4ab163ad24 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 2c9b9798ac..912c7932df 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -649,7 +649,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 9cbf42bbd0..f29fbaa4e2 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 2b7c2f6382..6f74183e66 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 2430abb92c..fd2531c51e 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index aa7e93f3b7..11be06990f 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 8b3d2d4678..b35e188839 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 5bf336ee0b..cdd0485c71 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 2459729354..06f24013b7 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index c71dce4e16..484e763b55 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index d0e04a4e15..44ea2075f8 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index bfefcb8e7a..ea8bb74b2c 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 024e7eb02e..8ca5af8389 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 1be1caa6c1..36594b67a3 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index af2f85febc..67b347df61 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -655,7 +655,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 65416123da..e60f80c810 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 89bb8c98a5..3c8ff861d1 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 0c673fe71c..12eaf6490b 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -642,7 +642,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 549eb5608f..cb337f3799 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index d7c1728044..33b6b2d4c3 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index dd14eb3b6b..9dbcd28206 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 8a072c2f24..16833a5c5b 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 3c97516059..d14443df35 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index a711845e3a..1ab2cfb142 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 8fb786b7e5..ac9bbfa965 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index a285f8d40b..2aeef8f3b2 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 93a31da9c3..3bc7fe9c87 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 7e5c092b2c..49587501e5 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 5f16d5ca23..c59670650e 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index f389b4df87..1708fac7b8 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index b992e89e02..a022ab42d5 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 1d639f74ab..a8cf639b11 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index edeb49de9c..a8ed59fc5c 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 7ea492dc5e..02ac73dc44 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index df9d0a0ac6..48ac1cf750 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -645,7 +645,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index e2160ada6b..49dfc7cdb8 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 69fd35ac53..ca01b771c3 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 42a4add562..e9196274c0 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index a3dfde4160..df18f42e1e 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -640,7 +640,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index f13b90ea22..b232b6ea6c 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -641,7 +641,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 7c9a6c5a62..618b3f8406 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -642,7 +642,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 9092886c64..1817aab08a 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -637,7 +637,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 782fb64109..7d6a592a6d 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -635,7 +635,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 369716e007..d988e75ac3 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -636,7 +636,7 @@ * * Use a physical model of the hotend to control temperature. When configured correctly * this gives better responsiveness and stability than PID and it also removes the need - * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model. + * for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 T to autotune the model. */ #if ENABLED(MPCTEMP) //#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)