3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-18 04:08:05 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

SD_DETECT_INVERTED => SD_DETECT_STATE

Browse source
This commit is contained in:
Scott Lahteine 2020-03-10 14:51:54 -05:00
parent 4fa4c7837e
commit a5a177400f
138 changed files with 414 additions and 828 deletions
Download patch file Download diff file Expand all files Collapse all files

9
config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -1025,12 +1025,9 @@
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
// around this by connecting a push button or single throw switch to the pin defined
// as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED
// The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
// Enable this option and set to HIGH if your SD cards are incorrectly detected.
#define SD_DETECT_STATE LOW
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "G1 Y190 Z190\nM84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.