3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-08 07:27:44 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ SERVO_DETACH_GCODE

Browse source 
MarlinFirmware/Marlin#22760
This commit is contained in:
Scott Lahteine 2021-09-13 22:07:49 -05:00
parent 87c1e6c27d
commit a548dae17d
283 changed files with 1415 additions and 566 deletions
Download patch file Download diff file Expand all files Collapse all files

7
config/default/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -2979,9 +2979,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2991,3 +2991,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -3037,9 +3037,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -3049,3 +3049,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Alfawise/U20/Configuration.h
View file

@ -3039,9 +3039,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -3051,3 +3051,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A2/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A2plus/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A6/Configuration.h
View file

@ -3041,9 +3041,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -3053,3 +3053,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A8/Configuration.h
View file

@ -2952,9 +2952,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2964,3 +2964,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A8plus/Configuration.h
View file

@ -2952,9 +2952,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2964,3 +2964,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/A9/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/E10/Configuration.h
View file

@ -2950,9 +2950,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2962,3 +2962,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET4+/Configuration.h
View file

@ -2986,9 +2986,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2998,3 +2998,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -2986,9 +2986,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2998,3 +2998,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET4/Configuration.h
View file

@ -2986,9 +2986,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2998,3 +2998,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET4X/Configuration.h
View file

@ -2986,9 +2986,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2998,3 +2998,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -2981,9 +2981,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2993,3 +2993,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET5/Configuration.h
View file

@ -2981,9 +2981,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2993,3 +2993,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Anet/ET5X/Configuration.h
View file

@ -2981,9 +2981,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2993,3 +2993,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -2950,9 +2950,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2962,3 +2962,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/i3 Mega/Configuration.h
View file

@ -2983,9 +2983,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2995,3 +2995,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/AnyCubic/i3/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command #define NUM_SERVOS 1 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/ArmEd/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Artillery/Genius/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Artillery/Sidewinder X1/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h
View file

@ -2963,9 +2963,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2975,3 +2975,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -2901,9 +2901,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2913,3 +2913,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BIQU/B1-BLTouch/Configuration.h
View file

@ -2953,9 +2953,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command #define NUM_SERVOS 1 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2965,3 +2965,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BIQU/B1/Configuration.h
View file

@ -2953,9 +2953,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2965,3 +2965,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BQ/Hephestos/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -2961,9 +2961,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2973,3 +2973,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/BQ/WITBOX/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/CTC/A13/Configuration.h
View file

@ -2949,9 +2949,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2961,3 +2961,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Cartesio/Configuration.h
View file

@ -2963,9 +2963,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2975,3 +2975,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Copymaster3D/300/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Copymaster3D/400/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Copymaster3D/500/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2956,9 +2956,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2968,3 +2968,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
View file

@ -2956,9 +2956,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2968,3 +2968,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
View file

@ -2962,9 +2962,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2974,3 +2974,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h
View file

@ -2950,9 +2950,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2962,3 +2962,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
View file

@ -2950,9 +2950,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2962,3 +2962,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -2976,9 +2976,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2988,3 +2988,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10 V3/Configuration.h
View file

@ -2979,9 +2979,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2991,3 +2991,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2958,9 +2958,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2970,3 +2970,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10/CrealityV1/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h
View file

@ -2959,9 +2959,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2971,3 +2971,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2960,9 +2960,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2972,3 +2972,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-10S/CrealityV1/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -2953,9 +2953,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2965,3 +2965,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-20/Configuration.h
View file

@ -2953,9 +2953,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2965,3 +2965,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-30 PrintMill/Configuration.h
View file

@ -2952,9 +2952,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2964,3 +2964,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-6 SE/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/CR-8/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-2/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Max/Configuration.h
View file

@ -2955,9 +2955,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2967,3 +2967,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
View file

@ -2954,9 +2954,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2966,3 +2966,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h
View file

@ -2951,9 +2951,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2963,3 +2963,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 V2/CrealityUI/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3 V2/MarlinUI/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/CrealityV1/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/CrealityV422/Configuration.h
View file

@ -2957,9 +2957,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2969,3 +2969,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/CrealityV427/Configuration.h
View file

@ -2951,9 +2951,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2963,3 +2963,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
View file

@ -2953,9 +2953,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2965,3 +2965,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h
View file

@ -2946,9 +2946,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2958,3 +2958,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h
View file

@ -2948,9 +2948,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2960,3 +2960,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h
View file

@ -2951,9 +2951,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2963,3 +2963,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

7
config/examples/Creality/Ender-4/Configuration.h
View file

@ -2947,9 +2947,9 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support. * Set to 0 to turn off servo support.
*/ */
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command //#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay. // 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
@ -2959,3 +2959,6 @@
// Edit servo angles with M281 and save to EEPROM with M500 // Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES //#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

Some files were not shown because too many files have changed in this diff Show more