3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-06 22:47:35 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔥 Clean up SCARA/TPARA

Browse source
This commit is contained in:
Scott Lahteine 2024-01-25 20:44:20 -06:00
parent 2d87933c03
commit a25f866843
358 changed files with 2506 additions and 5012 deletions
Download patch file Download diff file Expand all files Collapse all files

11
config/default/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1086,9 +1086,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1110,8 +1107,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1120,10 +1117,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Alfawise/U20/Configuration.h
View file

@ -1087,9 +1087,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1111,8 +1108,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1121,10 +1118,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A2/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A2plus/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A6/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A8/Configuration.h
View file

@ -1020,9 +1020,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1044,8 +1041,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1054,10 +1051,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A8plus/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/A9/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/E10/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET4+/Configuration.h
View file

@ -1023,9 +1023,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1047,8 +1044,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1057,10 +1054,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -1023,9 +1023,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1047,8 +1044,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1057,10 +1054,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET4/Configuration.h
View file

@ -1023,9 +1023,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1047,8 +1044,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1057,10 +1054,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET4X/Configuration.h
View file

@ -1023,9 +1023,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1047,8 +1044,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1057,10 +1054,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET5/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Anet/ET5X/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -1020,9 +1020,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1044,8 +1041,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1054,10 +1051,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/Vyper/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -1056,9 +1056,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1080,8 +1077,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1090,10 +1087,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -1027,9 +1027,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1051,8 +1048,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1061,10 +1058,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/AnyCubic/i3/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/ArmEd/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Hornet/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -1032,9 +1032,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1056,8 +1053,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1066,10 +1063,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -1015,9 +1015,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1039,8 +1036,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1049,10 +1046,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -1015,9 +1015,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1039,8 +1036,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1049,10 +1046,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/B1/Configuration.h
View file

@ -1024,9 +1024,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1048,8 +1045,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1058,10 +1055,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/BX/Configuration.h
View file

@ -1024,9 +1024,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1048,8 +1045,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1058,10 +1055,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BIQU/Thunder Standard/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BQ/Hephestos/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -1031,9 +1031,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1055,8 +1052,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1065,10 +1062,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/BQ/WITBOX/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/CTC/A13/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/CTC/Bizer/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Cartesio/Configuration.h
View file

@ -1033,9 +1033,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1057,8 +1054,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1067,10 +1064,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Copymaster3D/300/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Copymaster3D/400/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Copymaster3D/500/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 Max/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -1025,9 +1025,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1049,8 +1046,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1059,10 +1056,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -1025,9 +1025,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1049,8 +1046,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1059,10 +1056,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
View file

@ -1026,9 +1026,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1050,8 +1047,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1060,10 +1057,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h
View file

@ -1016,9 +1016,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1040,8 +1037,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1050,10 +1047,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -1026,9 +1026,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1050,8 +1047,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1060,10 +1057,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10 V3/Configuration.h
View file

@ -1026,9 +1026,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1050,8 +1047,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1060,10 +1057,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -1016,9 +1016,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1040,8 +1037,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1050,10 +1047,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -1016,9 +1016,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1040,8 +1037,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1050,10 +1047,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10/CrealityV1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S Pro/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-10S/CrealityV1/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-20/Stock/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-30 PrintMill/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-6 SE/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/CR-8/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-2/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Max Neo/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Max/Configuration.h
View file

@ -1019,9 +1019,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1043,8 +1040,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1053,10 +1050,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Neo/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h
View file

@ -1016,9 +1016,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1040,8 +1037,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1050,10 +1047,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
View file

@ -1017,9 +1017,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1041,8 +1038,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1051,10 +1048,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

11
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h
View file

@ -1018,9 +1018,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
#define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#elif ENABLED(MP_SCARA) #elif ENABLED(MP_SCARA)
#define SCARA_OFFSET_THETA1 12 // degrees #define SCARA_OFFSET_THETA1 12 // degrees
@ -1042,8 +1039,8 @@
#define TPARA_LINKAGE_1 120 // (mm) #define TPARA_LINKAGE_1 120 // (mm)
#define TPARA_LINKAGE_2 120 // (mm) #define TPARA_LINKAGE_2 120 // (mm)
// SCARA tower offset (position of Tower relative to bed zero position) // TPARA tower offset (position of Tower relative to bed zero position)
// This needs to be reasonably accurate as it defines the printbed position in the SCARA space. // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
#define TPARA_OFFSET_X 0 // (mm) #define TPARA_OFFSET_X 0 // (mm)
#define TPARA_OFFSET_Y 0 // (mm) #define TPARA_OFFSET_Y 0 // (mm)
#define TPARA_OFFSET_Z 0 // (mm) #define TPARA_OFFSET_Z 0 // (mm)
@ -1052,10 +1049,6 @@
// Radius around the center where the arm cannot reach // Radius around the center where the arm cannot reach
#define MIDDLE_DEAD_ZONE_R 0 // (mm) #define MIDDLE_DEAD_ZONE_R 0 // (mm)
// Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
#define THETA_HOMING_OFFSET 0
#define PSI_HOMING_OFFSET 0
#endif #endif
// @section polar // @section polar

Some files were not shown because too many files have changed in this diff Show more