3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-22 14:14:00 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Fan 2 for Biqu B1 SE Plus (#837)

Browse source
This commit is contained in:
Keith Bennett 2022-12-05 19:03:37 -08:00 • committed by GitHub
parent 315f4093af
commit a1c4306c18
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 4 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -3238,7 +3238,7 @@
// Set number of user-controlled fans. Disable to use all board-defined fans.
// :[1,2,3,4,5,6,7,8]
//#define NUM_M106_FANS 1
#define NUM_M106_FANS 1
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency

6
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -535,10 +535,10 @@
* The fan turns on automatically whenever any driver is enabled and turns
* off (or reduces to idle speed) shortly after drivers are turned off.
*/
//#define USE_CONTROLLER_FAN
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
//#define CONTROLLER_FAN2_PIN -1 // Set a custom pin for second controller fan
#define CONTROLLER_FAN_PIN FAN2_PIN // Set a custom pin for the controller fan
#define CONTROLLER_FAN2_PIN FAN1_PIN // Set a custom pin for second controller fan
//#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
//#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
#define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)