diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 6492d61e3a..13d66649d4 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index c4cac24694..cdad7c9c2b 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 037042504d..47aca450a8 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 89c178d70b..05873162ad 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 27886e9b4e..1fcdbe78c1 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1887,18 +1887,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1918,7 +1918,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 2f8a2025a4..73f0e68498 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1888,18 +1888,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1919,7 +1919,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 3af676f25f..f62542bf1f 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 5ed97c8c33..774351ed24 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index e3052ddfed..e3aeca7205 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 37c154196e..85b0a72df7 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 3b83e8f315..6407b8a697 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1883,18 +1883,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1914,7 +1914,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 5bf7c1b5fc..512510048b 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index dfa463e064..ce81cf9e14 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 1b934174b6..f797d60ca4 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index c3d3e2b2fa..b946d8e9f9 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 000618e7f3..c1af81b062 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index ebb0e85640..402b401616 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 0287d2fb8e..8841aa7c39 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 78371a2a39..8b46544f23 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 5ce3bd0d52..0706ce5f3c 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index c2ca2e120a..8b359d26b1 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index a736fc215c..c4101ab6b8 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 3469c415b2..48bee2234b 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index e2aeec899f..4453ba0260 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 613f4e706e..c001ab74e8 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index e53835288d..d19982cfb4 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 11daf7a18d..ba9b7adaf1 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index e72c02bbe8..7ff398f246 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index f7797e21ec..4c27ec9f3d 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -1841,18 +1841,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1872,7 +1872,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 0df5ee6ff6..2348b74c6e 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 882adc7e8b..a0871f4513 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 41ee013de3..bca14c20b7 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index d410845395..c1d9c29d6c 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 0bbf50df82..b01b109921 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index e04e61ff91..44e9904533 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 306f9f85bc..09aedf18b5 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1824,18 +1824,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1855,7 +1855,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index e348f17687..5987d8711c 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index a2322b8df5..7813e93e97 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 5397ee8f78..29ad30c013 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 7123c94eb2..c0c8cdedc8 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index c635d169bb..b31662a7cf 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1764,18 +1764,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1795,7 +1795,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h index 9bdd766e10..9466084030 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration.h @@ -1824,18 +1824,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1855,7 +1855,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration.h b/config/examples/BIQU/B1 - SKR 2/Configuration.h index ccc084334b..7cab503cf0 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration.h @@ -1824,18 +1824,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1855,7 +1855,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index a60c8dbe9c..272e43bb62 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1806,18 +1806,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1837,7 +1837,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 698190418b..e4be5ce5b2 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 1a53c96d15..b8183f74d7 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 53871dd81c..f491e16f40 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 7eabc80806..f020bbdf99 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1822,18 +1822,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1853,7 +1853,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 6bdf41ff2d..db4b067a6e 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 93e7443803..208dd85c8e 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 7ffd19b7f7..da15c216b5 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 00d94160af..e99074ece8 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index fdcb188369..fe0181d9ad 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1824,18 +1824,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1855,7 +1855,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index e8a445850d..5fca7fb84c 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 9e04cb509a..6146b7ca14 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 498965092a..68bf0b8e20 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index f6fc5ea72d..a1a10b5f74 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1817,18 +1817,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1848,7 +1848,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md index bb1653a99a..1345949ed9 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md @@ -57,7 +57,7 @@ By default, this is disabled. Enabling this seemed to provide better mesh data. Provides control panel probe controls. ```cpp -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING ``` Provides control panel bed tramming controls. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index c12608cb0e..c9c72c737e 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1817,18 +1817,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1848,7 +1848,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index ebe9bfed8e..b7f96c9131 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 8b5ce53335..5fab85e9a3 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index d913d86ccd..5226e61d5a 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 805fe95017..b296ccd686 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 30f9776b0e..035ff5fcb5 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 5cce6309a4..6616a446bc 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1835,18 +1835,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1866,7 +1866,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 16af5acc8f..1e8b788557 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1838,20 +1838,20 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 45, 45, 45, 45 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 45, 45, 45, 45 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner #if ENABLED(CR10V3_BLTOUCH) - #define LEVEL_CORNERS_USE_PROBE + #define BED_TRAMMING_USE_PROBE #endif - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1871,7 +1871,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 33fbe55d3e..96152b6c65 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 99dd789003..f5f294c21d 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 8ef0de0f2c..0175e2c603 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 353587858c..539bfdddb4 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index fb330c0b11..54d4075a07 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 594d752da4..d28a34be5b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index e420401e3a..89bd6a1b52 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 303f768b95..cf5dce3093 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 7715e4030b..d359ba4313 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 52fce86fde..49965d22a8 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 5ab85950db..4c120ef05f 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 01ee37714c..ccb0973140 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index e323440e5b..611b5d99ea 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 043d5dc6a3..e27e2ad918 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index b3ab29c780..fc6aafb981 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 44dfc7e35b..bd39cb71e8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index ed95f80d81..3a147c8779 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 6ce490fcb2..d231566a87 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 236c37ac50..99c0181edb 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index a844fbb4d2..268990a5be 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index d94ccad917..447aa90462 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index fb4bfa11b7..b3c29f7900 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 68961ce4f9..af8d6dbef2 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 S1/Configuration.h b/config/examples/Creality/Ender-3 S1/Configuration.h index e03cfa836a..c8f87ee691 100644 --- a/config/examples/Creality/Ender-3 S1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 902a5a24e0..35ea43d449 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 2bc2295f4e..74ece60ad8 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 7330329495..bd8d90553b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index be32c4a2fd..8ad9e0669e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index c4757d064c..4699942a13 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index f015524f1d..4447d35a86 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 5b1102b62c..f689d24951 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index bab2ad5aeb..2f4569be6d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 790829322d..b8bd024594 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 13ba6e2c44..b49d041c6e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index d19a0cb897..b877a2b74d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 49a12deb6f..7bdd4835f4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index cac707aa02..615803af5e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index a49af457b6..54309ed70c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 86ed044a72..c68e5d6756 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 438dbac8ea..08963adeca 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 3635540309..fd19677491 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index d830148277..24298aacd2 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1815,18 +1815,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1846,7 +1846,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 20f2015bde..4ef5cc0dc4 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 4d23f7778c..9c1c80ad82 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index a5dd584024..cd6ba5638e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 309d7d9741..49b0e4a315 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 63b1cf6c75..d2fe7a036f 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 889a01e2af..0f5d8f5f9c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 5e8199cdf0..6d69745063 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 8770850c41..d94e15c43b 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 09c2a5461c..9f22879651 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 335b2223b0..2facfb8089 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 6142e42df3..78e23a1fc5 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index b18d54a7bc..e5e01e5c7a 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 3dbae4add7..bc9f4b0f05 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -1818,18 +1818,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1849,7 +1849,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index cc915558f3..d434310204 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1818,18 +1818,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1849,7 +1849,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 9fa5386adf..1b3912b20c 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1705,6 +1705,9 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z #define ENABLE_LEVELING_FADE_HEIGHT + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. + #endif // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the @@ -1804,13 +1807,38 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK + #endif + + /** + * Corner Leveling Order + * + * Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge. + * + * LF Left-Front RF Right-Front + * LB Left-Back RB Right-Back + * + * Examples: + * + * Default {LF,RB,LB,RF} {LF,RF} {LB,LF} + * LB --------- RB LB --------- RB LB --------- RB LB --------- RB + * | 4 3 | | 3 2 | | <3> | | 1 | + * | | | | | | | <3>| + * | 1 2 | | 1 4 | | 1 2 | | 2 | + * LF --------- RF LF --------- RF LF --------- RF LF --------- RF + */ + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index acc6f1e601..50da5ed9c3 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/README.md b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/README.md index 7a21aa7b48..06fea7a974 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/README.md +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/README.md @@ -33,7 +33,7 @@ The configuration was made on a Phaetus Dragon hotend and a BMG clone extruder, - Enabled `MESH_EDIT_GFX_OVERLAY`, set `MESH_INSET` to `10` and `GRID_MAX_POINTS_X` to `9` (for UBL) - Enabled `LCD_BED_LEVELING` - Enabled `MESH_EDIT_MENU` -- Enabled `LEVEL_BED_CORNERS` +- Enabled `LCD_BED_TRAMMING` - Enabled `Z_SAFE_HOMING` - Set `HOMING_FEEDRATE_MM_M` to faster values - Enabled `NOZZLE_PARK_FEATURE` diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index b81772282d..7967b8dbe1 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 2a86c6d215..9d772515b8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 60c8fc92e0..b67f16ed6a 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 4825044582..ab1ecf46e5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 39b5a2cb88..592901290e 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 38bec9e95f..0601276c8a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index cee0cf82e8..8a6094d101 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 8fa1ce807a..85ed92c83e 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 272a223c94..8c40fd04e4 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 073ef47127..90a006b5c4 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1817,18 +1817,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1848,7 +1848,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 1b00fba2bb..f552a9783d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index e60c60234f..fa3351b2ca 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index fe7e00ef24..4f8bf589c2 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 8d0540740c..493b70dd19 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 3365377337..5667cf8877 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index deb1cc47d6..78204f7102 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1871,18 +1871,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1902,7 +1902,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 9d52e01cb0..b72fd56791 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1852,18 +1852,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1883,7 +1883,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index af95d927bc..95c7d517d1 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1849,18 +1849,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1880,7 +1880,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 134252b75d..d4ce5ad7be 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 52f2cf7220..6116e2c807 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 0e436a8891..ba8a31bdc5 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 91782fe453..88ff2c2bc2 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index fe099dce8e..f698fef0bc 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index e9ebd826fc..b242cff1a7 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 6d61b2e57d..2bfcf8eaac 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index ac539dfa1b..4eb07a8723 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index ba47d6535d..d236068305 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FoamCutter/Configuration.h b/config/examples/FoamCutter/Configuration.h index 3c632f926e..460ac17f9b 100644 --- a/config/examples/FoamCutter/Configuration.h +++ b/config/examples/FoamCutter/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index c25f07ba2d..300048f928 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 940eaf3e48..c71b3d0186 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1919,18 +1919,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1950,7 +1950,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index ef0b6e85cd..44892c7b3a 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 7f5d9a8e32..f072cf2683 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1821,18 +1821,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1852,7 +1852,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index a7d2423e33..4420059566 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 599dd10452..9af37aac93 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 8470ba4e37..73700857d0 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 1624d76dbf..f977f1d2a9 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index d0e1bebace..2a1445ebad 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 26b390c278..52427c0a13 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index be29423113..e78b777ed9 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 011eab27df..966396c128 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 6091e1c108..55d019a082 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 313db6674f..e13538b5b4 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 171923ee05..98d0ce2218 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 90c7ee06ad..73f5307b84 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 3444140562..090d321b1a 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 1b7a5bbb66..b8c40d8d7e 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index a1ac4c8e9c..4be9b0138b 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index ffd7834d0e..46ef8d4b33 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 08cc7bfbe0..da109efeec 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 805b94cebb..3e7ceb3c01 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 33c53a904d..b5213ad82c 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 581de3d6d2..29a7b01186 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 52c156d9b9..45e1463ef8 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index a8868eae8d..e38ff57a01 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 97739a7093..3c8522fbd7 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1818,18 +1818,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1849,7 +1849,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index ea80033081..a6605c9a0d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1819,18 +1819,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1850,7 +1850,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md index d908932c50..c36feb71ae 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md @@ -10,7 +10,7 @@ The main characteristics of these configurations are: - An example `SKEW_CORRECTION` for a particular printer is enabled. See comments below about how to adjust it to a particular printer. - Using the LCD controller for bed leveling is enabled. - `PROBE_MANUALLY` is enabled, which *provides a means to do "Auto" Bed Leveling without a probe*. - - The `LEVEL_BED_CORNERS` option for manual bed adjustment is enabled. + - The `LCD_BED_TRAMMING` option for manual bed adjustment is enabled. - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled. - `PRINTCOUNTER` is enabled, in order to track statistical data. - `INDIVIDUAL_AXIS_HOMING_MENU` is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 5965c84b4f..05a712a642 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1818,18 +1818,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1849,7 +1849,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md index d908932c50..c36feb71ae 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md @@ -10,7 +10,7 @@ The main characteristics of these configurations are: - An example `SKEW_CORRECTION` for a particular printer is enabled. See comments below about how to adjust it to a particular printer. - Using the LCD controller for bed leveling is enabled. - `PROBE_MANUALLY` is enabled, which *provides a means to do "Auto" Bed Leveling without a probe*. - - The `LEVEL_BED_CORNERS` option for manual bed adjustment is enabled. + - The `LCD_BED_TRAMMING` option for manual bed adjustment is enabled. - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled. - `PRINTCOUNTER` is enabled, in order to track statistical data. - `INDIVIDUAL_AXIS_HOMING_MENU` is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index a9f8a22096..951af08031 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 0365b23cb2..6a00c98722 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 6003e470d9..d3580cb15a 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1806,18 +1806,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1837,7 +1837,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Index/REV_03/Configuration.h b/config/examples/Index/REV_03/Configuration.h index bd7fe96a62..f9f5806f6c 100644 --- a/config/examples/Index/REV_03/Configuration.h +++ b/config/examples/Index/REV_03/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 62d2c638d0..538290bb97 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index ec1db17742..b86c7566dd 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index fec2853eea..10ac3a0df0 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index c1661bffb9..3209edda36 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 2644d53ec8..b996dd82a3 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1816,18 +1816,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1847,7 +1847,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 3f7d1ef219..cfe10a4076 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index a776841479..c7a26728b8 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 3fc9add97f..16a84628cb 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1807,18 +1807,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1838,7 +1838,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index fa4e8b4129..5322ab5e7b 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 6e1cc508cf..af6bdaa9b6 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 2aa55b729f..cb84913904 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1819,18 +1819,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1850,7 +1850,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index f40c76edb9..fc66a28b88 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 1c4c993e14..78267d3bdf 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 6960f10456..2c1e44760c 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 4042baf21a..ca5b998119 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1836,18 +1836,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1867,7 +1867,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 051e6df9d0..45ece35e76 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index d3c9a59690..5f7a350bd0 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index eca31aaad8..746355fd2e 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 49c79ae1ef..9a7cef1ccc 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 2525be9822..21926c487f 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 0874c82c74..64ded6ee10 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1814,18 +1814,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1845,7 +1845,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 0769613ef0..1d5c963c74 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index bcec596e5c..cde2a8ab3f 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index db324f8173..e7cd4ac4e3 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 8f8507ba0a..fa9bc5b5c0 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 554ffc0c29..022c850767 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 6.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 6.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index ba3b3a8266..c0f286050b 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index b36cd917eb..e03a98782c 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index e02c0e43fb..abca923692 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 64cd50bd23..46de6ae0e9 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1841,18 +1841,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1872,7 +1872,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 41b1afe4be..a1d31a6273 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1832,18 +1832,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1863,7 +1863,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index ecf843e39e..0a103034e3 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 7202e9c359..f4f3986054 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1849,18 +1849,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1880,7 +1880,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 9d2dc6f95f..7505d89645 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 9f4fb4e6ab..25942cd009 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index dc29457b2c..e74a546d2c 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index cc687e07f4..545fc23d08 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 3c375a5728..6a2828b262 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1858,18 +1858,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1889,7 +1889,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index b19e19f46b..2b74f472f6 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index c6387c633b..6cf7bf3f55 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1822,18 +1822,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1853,7 +1853,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index c0285ad521..7de889e4e6 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index b56dbed9bf..2b856fb9a7 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1854,18 +1854,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1885,7 +1885,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index e96a75bae7..3a5614ad44 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1854,18 +1854,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1885,7 +1885,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 633c888acd..9d113c0fc1 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 71bf6c956a..d617fcb97c 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 67d2db4ee7..3faa03b01c 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -1839,18 +1839,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1870,7 +1870,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 87504a52ec..813c1a92a6 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 342c6318b6..d9efeb1487 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 29fedcf728..206abe317d 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 7ef945e216..9f1359ff9b 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 9c49676c70..7c0cac4dc9 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 0153a261fb..1cb3768969 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 65b0b7ac88..039de2b06e 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1834,18 +1834,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1865,7 +1865,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 7d45ee6e25..009e294749 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index eb657975b2..6d4fb8b56a 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 6c6d0bdcf4..3665da52d4 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 773d0f9b9f..7c88ef2e37 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 015e3a29d0..d0e4614c7f 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index d0639ec554..a0916a3b55 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1854,18 +1854,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1885,7 +1885,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 8c1ec44c87..39139f48f9 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index e3329db4fc..c8c4dab4ed 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 9625d3d837..dad3e3ccfd 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -1817,18 +1817,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1848,7 +1848,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 13c4ae8e26..381f717b7a 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 0fd194ad53..da2986dc85 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 50, 50, 50, 50 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - #define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - #define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 50, 50, 50, 50 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + #define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + #define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 776c0b3923..0b98fae68f 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index ee471619d4..9f7579d329 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1815,18 +1815,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1846,7 +1846,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 9c34897f6f..92ce1e3bd1 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1810,18 +1810,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1841,7 +1841,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index c56ab99aad..a98a581035 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1837,18 +1837,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1868,7 +1868,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index dd80434e2c..6ae5f306c7 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1842,18 +1842,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1873,7 +1873,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index e70aaef0f6..6eb6d9c491 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1841,18 +1841,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1872,7 +1872,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 085a203758..551c4c75eb 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1846,18 +1846,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 35, 35, 35, 35 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 35, 35, 35, 35 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1877,7 +1877,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 978224b89d..23adf25ce6 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1840,18 +1840,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1871,7 +1871,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 111c9be90f..d55ff30c2d 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 794f38b3c3..b624cfb380 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 5cf0d3b497..3921a70661 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1825,18 +1825,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1856,7 +1856,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index ffb3dc4558..24678a5ba8 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 71619b8e1f..cec93c2695 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF } #endif /** diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index ba5504e524..8ecd231d2d 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index d5527846c7..66df9de22d 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1843,18 +1843,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1874,7 +1874,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index d890a19922..45e6fb6cea 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1847,18 +1847,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1878,7 +1878,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index c46c5500bb..999e05c44a 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 0f193c68ce..06e7d93f0f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 988f021248..d0b661484c 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1822,18 +1822,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1853,7 +1853,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 5e1bf259c7..a82d76adf4 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 5991a7dcd6..3ff5212ad0 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index dc33894c1d..653e9a946e 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 770392c69d..785e87d83b 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS +#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 2d64ed49e6..5e3a66a9f4 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index e2dbe0904d..bd579b7b1a 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 63af1ddf5c..4632d293f5 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1808,18 +1808,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1839,7 +1839,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index e4e1d65a0c..fe989ec31c 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 0ffebe9e80..5d04dcc826 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1809,18 +1809,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1840,7 +1840,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index dfcf96bf74..12a453cb66 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1813,18 +1813,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1844,7 +1844,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index f2dc285f91..35dd83e348 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1812,18 +1812,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1843,7 +1843,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 8255061f58..acfb1d16ce 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1949,18 +1949,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1980,7 +1980,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 0b5eb3b444..4d055c94bd 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1950,18 +1950,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1981,7 +1981,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 9288dc3cd4..8dd8c31917 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index b75bf2a744..c4b5e662c7 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1889,18 +1889,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1920,7 +1920,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 6ffd3e9d74..12d7225a57 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1896,18 +1896,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1927,7 +1927,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 0ecb5b14e1..93a0665bfc 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1893,18 +1893,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1924,7 +1924,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 2ca2bbe988..649de78abb 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1890,18 +1890,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1921,7 +1921,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 752f25278b..048bbd14f6 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 43fdb79705..502e9614cc 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index fc9f7be36f..6c3c4a9b93 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1895,18 +1895,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1926,7 +1926,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 98b27e5ec2..9c2ed7ed24 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1894,18 +1894,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1925,7 +1925,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 94dbcd199f..26893a8c05 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1894,18 +1894,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1925,7 +1925,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index a2b05ec0e6..a452b97d7d 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1890,18 +1890,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1921,7 +1921,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 483932cf56..e45dc277cd 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1890,18 +1890,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1921,7 +1921,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 4e34bc7c1a..dee5b29270 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1890,18 +1890,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1921,7 +1921,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 255c6b006b..3347e15778 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1890,18 +1890,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1921,7 +1921,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 968f7976f8..b1f49a2dba 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 937fba5cd7..2ebe0f1019 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1897,18 +1897,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1928,7 +1928,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 62cb390ddf..b4a61ae145 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index dfb89b35a3..db7581fee5 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1857,18 +1857,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1888,7 +1888,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index b838456ee9..e74c4465e2 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1893,18 +1893,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1924,7 +1924,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 274d5eca7c..89534627d6 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1892,18 +1892,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1923,7 +1923,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index db543f75b7..f658ecfbb9 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1891,18 +1891,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1922,7 +1922,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index aab10ffeb8..923116b67a 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1894,18 +1894,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1925,7 +1925,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 9f668e3851..029b38f106 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1913,18 +1913,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1944,7 +1944,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 88e21e879c..8fb9c31309 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1897,18 +1897,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1928,7 +1928,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 2c8d25364c..b16566200e 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1816,18 +1816,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1847,7 +1847,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 46637b5562..b3c5bed585 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1795,18 +1795,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1826,7 +1826,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index feeb92daf3..bccd370f87 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1811,18 +1811,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1842,7 +1842,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /** diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 1ad8deb4e0..c23e4160b0 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1815,18 +1815,18 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +//#define LCD_BED_TRAMMING -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK +#if ENABLED(LCD_BED_TRAMMING) + #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + //#define BED_TRAMMING_USE_PROBE + #if ENABLED(BED_TRAMMING_USE_PROBE) + #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) + #define BED_TRAMMING_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify + //#define BED_TRAMMING_AUDIO_FEEDBACK #endif /** @@ -1846,7 +1846,7 @@ * | 1 2 | | 1 4 | | 1 2 | | 2 | * LF --------- RF LF --------- RF LF --------- RF LF --------- RF */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define BED_TRAMMING_LEVELING_ORDER { LF, RF, RB, LB } #endif /**